首頁 無線連線 長距離 Sub-1 GHz 產品 Sub-1 GHz 收發器
首頁
無線連線
長距離 Sub-1 GHz 產品
Sub-1 GHz 收發器

CC1150

現行

適用低功耗無線應用的高度整合式多通道發射器

立即訂購
產品規格表

CC1150

現行
立即訂購

產品詳細資料

Protocols Proprietary Modulation scheme (G)MSK, 2(G)FSK, ASK, OOK Frequency bands 300-348, 400-464, 779-928 Type Transmitter TX power (max) (dBm) 10 Data rate (max) (Mbps) 0.5 Rating Catalog Operating temperature range (°C) -40 to 85 Edge AI enabled No
Protocols Proprietary Modulation scheme (G)MSK, 2(G)FSK, ASK, OOK Frequency bands 300-348, 400-464, 779-928 Type Transmitter TX power (max) (dBm) 10 Data rate (max) (Mbps) 0.5 Rating Catalog Operating temperature range (°C) -40 to 85 Edge AI enabled No
VQFN (RGV) 16 16 mm² (4 mm × 4 mm)
  • Small Size
    • QLP 4-mm × 4-mm Package, 16 Pins
  • True Single Chip UHF RF Transmitter
  • Frequency Bands
    • 300 to 348 MHz
    • 400 to 464 MHz
    • 800 to 928 MHz
  • Programmable Data Rate Up to 500 kBaud
  • Low Current Consumption
  • Programmable Output Power Up to +10 dBm for
    All Supported Frequencies
  • Programmable Baseband Modulator
  • Ideal For Multi-channel Operation
  • Very Few External Components
    • Completely On-chip Frequency Synthesizer
    • No External Filters Needed
  • Configurable Packet Handling Hardware
  • Suitable for Frequency Hopping Systems Due to a
    Fast Settling Frequency Synthesizer
  • Optional Forward Error Correction with Interleaving
  • 64-byte TX Data FIFO
  • Suited for Systems Compliant with EN 300 220
    and FCC CFR Part 15
  • Many Powerful Digital Features Allow a High-
    performance RF system to be made Using an
    Inexpensive Microcontroller
  • Efficient SPI interface: All Registers Can be
    Programmed With One "Burst" Transfer
  • Integrated Analog Temperature Sensor
  • Lead-free “Green” Package
  • Flexible Support for Packet Oriented Systems
    • On-chip Support for Sync-Word Insertion,
      Flexible Packet Length and Automatic CRC
      Handling
  • OOK and Flexible ASK Shaping Supported
  • 2-FSK, GFSK and MSK Supported
  • Optional Automatic Whitening of Data
  • Support for Asynchronous Transparent Transmit
    Mode for Backwards Compatibility with Existing
    Radio Communication Protocols
  • Small Size
    • QLP 4-mm × 4-mm Package, 16 Pins
  • True Single Chip UHF RF Transmitter
  • Frequency Bands
    • 300 to 348 MHz
    • 400 to 464 MHz
    • 800 to 928 MHz
  • Programmable Data Rate Up to 500 kBaud
  • Low Current Consumption
  • Programmable Output Power Up to +10 dBm for
    All Supported Frequencies
  • Programmable Baseband Modulator
  • Ideal For Multi-channel Operation
  • Very Few External Components
    • Completely On-chip Frequency Synthesizer
    • No External Filters Needed
  • Configurable Packet Handling Hardware
  • Suitable for Frequency Hopping Systems Due to a
    Fast Settling Frequency Synthesizer
  • Optional Forward Error Correction with Interleaving
  • 64-byte TX Data FIFO
  • Suited for Systems Compliant with EN 300 220
    and FCC CFR Part 15
  • Many Powerful Digital Features Allow a High-
    performance RF system to be made Using an
    Inexpensive Microcontroller
  • Efficient SPI interface: All Registers Can be
    Programmed With One "Burst" Transfer
  • Integrated Analog Temperature Sensor
  • Lead-free “Green” Package
  • Flexible Support for Packet Oriented Systems
    • On-chip Support for Sync-Word Insertion,
      Flexible Packet Length and Automatic CRC
      Handling
  • OOK and Flexible ASK Shaping Supported
  • 2-FSK, GFSK and MSK Supported
  • Optional Automatic Whitening of Data
  • Support for Asynchronous Transparent Transmit
    Mode for Backwards Compatibility with Existing
    Radio Communication Protocols

The CC1150 is a true single-chip UHF transmitter designed for very low power wireless applications. The circuit is mainly intended for the ISM (Industrial, Scientific and Medical) and SRD (Short Range Device) frequency bands at 315-, 433-, 868-, and 915-MHz, but can easily be programmed for operation at other frequencies in the 300 to 348 MHz, 400 to 464 MHz and 800 to 928 MHz bands.

The RF transmitter is integrated with a highly configurable baseband modulator. The modulator supports various modulation formats and has a configurable data rate up to 500 kBaud. The CC1150 device provides extensive hardware support for packet handling, data buffering and burst transmissions.

The main operating parameters and the 64-byte transmit FIFO of CC1150 can be controlled via an SPI interface. In a typical system, the CC1150 device will be used together with a microcontroller and a few additional passive components.

CC1150 is part of the SmartRF™ technology platform based on 0.18-µm CMOS technology from Texas Instruments.

The CC1150 is a true single-chip UHF transmitter designed for very low power wireless applications. The circuit is mainly intended for the ISM (Industrial, Scientific and Medical) and SRD (Short Range Device) frequency bands at 315-, 433-, 868-, and 915-MHz, but can easily be programmed for operation at other frequencies in the 300 to 348 MHz, 400 to 464 MHz and 800 to 928 MHz bands.

The RF transmitter is integrated with a highly configurable baseband modulator. The modulator supports various modulation formats and has a configurable data rate up to 500 kBaud. The CC1150 device provides extensive hardware support for packet handling, data buffering and burst transmissions.

The main operating parameters and the 64-byte transmit FIFO of CC1150 can be controlled via an SPI interface. In a typical system, the CC1150 device will be used together with a microcontroller and a few additional passive components.

CC1150 is part of the SmartRF™ technology platform based on 0.18-µm CMOS technology from Texas Instruments.
filter 尋找其它 Sub-1 GHz 收發器
下載 觀看有字幕稿的影片 影片

您可能會感興趣的類似產品

open-in-new 比較替代產品
功能相似於所比較的產品。
CC115L 現行 經濟型產品線 Sub-1 GHz 無線發射器 This product has lower performance and costs less.

技術文件

找不到結果。請清除您的搜尋條件，然後再試一次。
檢視所有 26
重要文件 類型 標題 格式選項 下載最新的英文版本 日期
* 資料表 CC1150 Low Power Sub-1 GHz RF Transmitter datasheet (Rev. B) PDF | HTML 2015/3/31
* 勘誤表 CC1150 SIlicon Errata (Rev. D) 2015/9/21
* 輻射及可靠性報告 CC1150 Reliability report 2007/7/16
應用說明 DN035 -- Antenna Quick Guide (Rev. B) 2022/2/9
應用說明 Debugging Communication Range (Rev. A) PDF | HTML 2019/5/23
應用說明 DN507 -- FEC Decoding 2019/3/21
應用說明 CRC Implementation (Rev. E) PDF | HTML 2018/9/27
應用說明 AN098 - Layout Review Techniques for Low Power RF Designs (Rev. A) 2012/8/2
應用說明 DN025 -- Johanson Technology Matched Balun Filters (Rev. A) 2011/10/13
應用說明 DN023 -- 868 MHz, 915 MHz and 955 MHz Inverted F Antenna (Rev. C) 2011/8/30
應用說明 AN095 -- Continuous Data Streaming Applications - Using Serial Synchronous Mode (Rev. A) 2011/7/18
應用說明 AN058 -- Antenna Selection Guide (Rev. B) 2010/10/6
應用說明 DN031 -- CC-Antenna-DK Documentation and Antenna Measurements Summary 2010/8/26
應用說明 DN006 -- CC11xx Settings for FCC15.247 Solutions (Rev. B) 2010/8/17
應用說明 DN500 -- Packet Transmission Basics (Rev. C) 2009/4/6
應用說明 DN501 -- PATABLE Access (Rev. B) 2009/3/24
應用說明 DN300 -- SmartRF04EB Troubleshooting (Rev. B) 2009/3/24
應用說明 DN400 -- Interfacing CC1100 - CC2500 with MSP430 (Rev. A) 2009/3/24
應用說明 AN069 -- Low Cost Long Range One Way Audio Communications at 900 MHz (Rev. B) 2009/3/24
應用說明 DN017 -- CC11xx 868/915 MHz RF Matching (Rev. A) 2008/3/31
應用說明 DN012 -- Programming Output Powers on CC1100 and CC1150 (Rev. A) 2008/1/2
應用說明 DN506 -- GDO Pin Usage (Rev. A) 2007/10/22
應用說明 DN503 -- SPI Access (Rev. B) 2007/10/22
應用說明 DN504 -- FEC Implementation (Rev. A) 2007/10/22
更多文件說明 CC1150 Material content 2007/7/16
更多文件說明 CC1150 RoHS Confirmation 2006/1/31

設計與開發

如需其他條款或必要資源，請按一下下方的任何標題以檢視詳細頁面 (如有)。

程式碼範例或展示

SWRC021 — CC1100 CC1101 CC1100E CC2500 Examples Libraries

支援產品和硬體
支援軟體

SWRC046 — SmartRF(TM) Studio 6.13.1

支援產品和硬體
計算工具

SMARTRF-STUDIO-7 — SmartRF Studio

SmartRF™ Studio 是一款 Windows 應用程式，功用在於協助射頻系統的設計人員在為所有 TI CC1xxx 及 CC2xxx 低功耗射頻裝置設計過程中，能在早期階段輕鬆評估無線電。此程式簡化了配置暫存器值和命令的產生，以及射頻系統的實際測試和除錯。

SmartRF Studio 支援下列 TI 裝置：

 

資源

支援產品和硬體
設計工具

SIMPLELINK-SUB1GHZ-DESIGN-REVIEWS — SimpleLink™ CC1xxx 裝置的硬體設計審查

開始使用 SimpleLink ™ Sub-1GHz 硬體設計審審查程序：

  • 步驟 1：申請審查之前，請務必檢閱技術文件與相關產品頁的設計與開發資源（請參閱下方的 CC1xxx 產品頁連結）。
  • 步驟 2：下載並填寫硬體設計審查申請表。
  • 步驟 3：請將填好的硬體設計審查申請表及所需文件以電子郵件傳送至：connectivity-sub1ghz-hw-review@list.ti.com

SimpleLink 硬體設計審核流程提供一對一接觸的方式，並由主題內容專家協助審查您的設計，提供您寶貴的意見。有關用於申請審核的簡單三步驟流程，以及相關技術文件和資源的連結，可在此處找到。

一般設計問題應張貼在我們的 (...)

支援產品和硬體
封裝 針腳 CAD 符號、佔位空間與 3D 模型
VQFN (RGV) 16 Ultra Librarian
適用 TI 的評估品項標準條款與條件。

訂購與品質

建議產品可能具有與此 TI 產品相關的參數、評估模組或參考設計。

支援與培訓

內含 TI 工程師技術支援的 TI E2E™ 論壇

以英文檢視所有論壇主題

內容係由 TI 和社群貢獻者依「現狀」提供，且不構成 TI 規範。檢視使用條款。

若有關於品質、封裝或訂購 TI 產品的問題，請參閱 TI 支援。​​​​​​​​​​​​​​

影片