CC2620

現行

含 128kB 快閃記憶體的 SimpleLink™ 32 位元 Arm Cortex-M3 Zigbee® RF4CE 無線 MCU

立即訂購

產品規格表

document-pdfAcrobat CC2620 SimpleLink™ ZigBee® RF4CE Wireless MCU datasheet (Rev. C) (英文) PDF | HTML

使用指南

document-pdfAcrobat
CC13x0, CC26x0 SimpleLink™ Wireless MCU Technical Reference Manual (Rev. I) (英文)

勘誤表

document-pdfAcrobat
CC2620 SimpleLink™ Wireless MCU Errata (Rev. A) (英文)

現在提供此產品的更新版本

open-in-new

比較替代產品

功能相同，但引腳輸出與所比較的裝置不同

CC2340R2

現行

具有 256kB 快閃記憶體的 SimpleLink™ 32 位元 Arm® Cortex®-M0+ 2.4GHz 無線 MCU This product is a newer device with improved functionality.

CC2340R5

現行

具有 512kB 快閃記憶體的 SimpleLink™ 32 位元 Arm® Cortex®-M0+ 2.4GHz 無線 MCU This product is a newer device with improved functionality.

CC2620

現行

產品規格表

立即訂購

產品詳細資料

Frequency range

2400-2480 MHz

Standard

802.15.4

Operating temperature range (°C)

-40 to 85

Rating

Catalog

Transmission principle

IEEE 802.15.4

Frequency range

2400-2480 MHz

Standard

802.15.4

Operating temperature range (°C)

-40 to 85

Rating

Catalog

Transmission principle

IEEE 802.15.4

VQFN (RGZ)

49 mm² 7 x 7

VQFN (RSM)

16 mm² 4 x 4

Microcontroller
- Powerful ARM^® Cortex^®-M3
- EEMBC CoreMark^® Score: 142
- Up to 48-MHz Clock Speed
- 128KB of In-System Programmable Flash
- 8KB of SRAM for Cache
- 20KB of Ultralow-Leakage SRAM
- 2-Pin cJTAG and JTAG Debugging
- Supports Over-The-Air Upgrade (OTA)
Ultralow-Power Sensor Controller
- Can Run Autonomous From the Rest of the System
- 16-Bit Architecture
- 2KB of Ultralow-Leakage SRAM for Code and Data
Efficient Code Size Architecture, Placing Drivers, IEEE 802.15.4 MAC, and Bootloader in ROM
RoHS-Compliant Packages
- 4-mm × 4-mm RSM VQFN32 (10 GPIOs)
- 7-mm × 7-mm RGZ VQFN48 (31 GPIOs)
Peripherals
- All Digital Peripheral Pins Can Be Routed to Any GPIO
- Four General-Purpose Timer Modules
  (Eight 16-Bit or Four 32-Bit Timers, PWM Each)
- 12-Bit ADC, 200-ksamples/s, 8-Channel Analog MUX
- Continuous Time Comparator
- Ultralow-Power Analog Comparator
- Programmable Current Source
- UART
- 2× SSI (SPI, MICROWIRE, TI)
- I2C
- I2S
- Real-Time Clock (RTC)
- AES-128 Security Module
- True Random Number Generator (TRNG)
- 10, 15, or 31 GPIOs, Depending on Package Option
- Support for Eight Capacitive-Sensing Buttons
- Integrated Temperature Sensor
External System
- On-Chip internal DC-DC Converter
- Very Few External Components
- Seamless Integration With the SimpleLink™ CC2590 and CC2592 Range Extenders
Low Power
- Wide Supply Voltage Range
  - Normal Operation: 1.8 to 3.8 V
  - External Regulator Mode: 1.7 to 1.95 V
- Active-Mode RX: 5.9 mA
- Active-Mode TX at 0 dBm: 6.1 mA
- Active-Mode TX at +5 dBm: 9.1 mA
- Active-Mode MCU: 61 µA/MHz
- Active-Mode MCU: 48.5 CoreMark/mA
- Active-Mode Sensor Controller: 8.2 µA/MHz
- Standby: 1 µA (RTC Running and RAM/CPU Retention)
- Shutdown: 100 nA (Wake Up on External Events)
RF Section
- 2.4-GHz RF Transceiver Compatible With IEEE 802.15.4 PHY and MAC
- Excellent Receiver Sensitivity (–100 dBm), Selectivity, and Blocking Performance
- Link budget of 105 dB
- Programmable Output Power up to +5 dBm
- Single-Ended or Differential RF Interface
- Suitable for Systems Targeting Compliance With Worldwide Radio Frequency Regulations
  - ETSI EN 300 328 (Europe)
  - EN 300 440 Class 2 (Europe)
  - FCC CFR47 Part 15 (US)
  - ARIB STD-T66 (Japan)
Tools and Development Environment
- Full-Feature and Low-Cost Development Kits
- Multiple Reference Designs for Different RF Configurations
- Packet Sniffer PC Software
- Sensor Controller Studio
- RemoTI™ Target Emulator
- SmartRF™ Studio
- SmartRF Flash Programmer 2
- IAR Embedded Workbench^® for ARM
- Code Composer Studio™

All trademarks are the property of their respective owners.

Microcontroller
- Powerful ARM^® Cortex^®-M3
- EEMBC CoreMark^® Score: 142
- Up to 48-MHz Clock Speed
- 128KB of In-System Programmable Flash
- 8KB of SRAM for Cache
- 20KB of Ultralow-Leakage SRAM
- 2-Pin cJTAG and JTAG Debugging
- Supports Over-The-Air Upgrade (OTA)
Ultralow-Power Sensor Controller
- Can Run Autonomous From the Rest of the System
- 16-Bit Architecture
- 2KB of Ultralow-Leakage SRAM for Code and Data
Efficient Code Size Architecture, Placing Drivers, IEEE 802.15.4 MAC, and Bootloader in ROM
RoHS-Compliant Packages
- 4-mm × 4-mm RSM VQFN32 (10 GPIOs)
- 7-mm × 7-mm RGZ VQFN48 (31 GPIOs)
Peripherals
- All Digital Peripheral Pins Can Be Routed to Any GPIO
- Four General-Purpose Timer Modules
  (Eight 16-Bit or Four 32-Bit Timers, PWM Each)
- 12-Bit ADC, 200-ksamples/s, 8-Channel Analog MUX
- Continuous Time Comparator
- Ultralow-Power Analog Comparator
- Programmable Current Source
- UART
- 2× SSI (SPI, MICROWIRE, TI)
- I2C
- I2S
- Real-Time Clock (RTC)
- AES-128 Security Module
- True Random Number Generator (TRNG)
- 10, 15, or 31 GPIOs, Depending on Package Option
- Support for Eight Capacitive-Sensing Buttons
- Integrated Temperature Sensor
External System
- On-Chip internal DC-DC Converter
- Very Few External Components
- Seamless Integration With the SimpleLink™ CC2590 and CC2592 Range Extenders
Low Power
- Wide Supply Voltage Range
  - Normal Operation: 1.8 to 3.8 V
  - External Regulator Mode: 1.7 to 1.95 V
- Active-Mode RX: 5.9 mA
- Active-Mode TX at 0 dBm: 6.1 mA
- Active-Mode TX at +5 dBm: 9.1 mA
- Active-Mode MCU: 61 µA/MHz
- Active-Mode MCU: 48.5 CoreMark/mA
- Active-Mode Sensor Controller: 8.2 µA/MHz
- Standby: 1 µA (RTC Running and RAM/CPU Retention)
- Shutdown: 100 nA (Wake Up on External Events)
RF Section
- 2.4-GHz RF Transceiver Compatible With IEEE 802.15.4 PHY and MAC
- Excellent Receiver Sensitivity (–100 dBm), Selectivity, and Blocking Performance
- Link budget of 105 dB
- Programmable Output Power up to +5 dBm
- Single-Ended or Differential RF Interface
- Suitable for Systems Targeting Compliance With Worldwide Radio Frequency Regulations
  - ETSI EN 300 328 (Europe)
  - EN 300 440 Class 2 (Europe)
  - FCC CFR47 Part 15 (US)
  - ARIB STD-T66 (Japan)
Tools and Development Environment
- Full-Feature and Low-Cost Development Kits
- Multiple Reference Designs for Different RF Configurations
- Packet Sniffer PC Software
- Sensor Controller Studio
- RemoTI™ Target Emulator
- SmartRF™ Studio
- SmartRF Flash Programmer 2
- IAR Embedded Workbench^® for ARM
- Code Composer Studio™

All trademarks are the property of their respective owners.

The CC2620 device is a wireless MCU targeting ZigBee^® RF4CE remote control applications, both controller and target node.

The device is a member of the CC26xx family of cost-effective, ultralow power, 2.4-GHz RF devices. Very low active RF and MCU current and low-power mode current consumption provide excellent battery lifetime and allow for operation on small coin cell batteries and in energy-harvesting applications.

The CC2620 device contains a 32-bit ARM Cortex-M3 processor that runs at 48 MHz as the main processor and a rich peripheral feature set that includes a unique ultralow power sensor controller. This sensor controller is ideal for interfacing external sensors and for collecting analog and digital data autonomously while the rest of the system is in sleep mode. Thus, the CC2620 device is ideal for ZigBee RF4CE remote controls with features like voice, motion, RF-IR hybrid remotes, and qwerty keyboards and STB/target nodes with capacitive touch.

The IEEE 802.15.4 MAC is embedded into ROM and runs partly on an ARM Cortex-M0 processor. This architecture improves overall system performance and power consumption and frees up flash memory for the application.

Software stack support for this device includes: ZigBee RF4CE stack (RemoTI) which is available free of charge from www.ti.com.

The CC2620 device is a wireless MCU targeting ZigBee^® RF4CE remote control applications, both controller and target node.

Software stack support for this device includes: ZigBee RF4CE stack (RemoTI) which is available free of charge from www.ti.com.

filter

尋找其它其它無線產品

下載觀看有字幕稿的影片影片

技術文件

star

=TI 所選的此產品重要文件

找不到結果。請清除您的搜尋條件，然後再試一次。

檢視所有 19

重要文件	類型	標題	格式選項	日期
*	Data sheet	CC2620 SimpleLink™ ZigBee® RF4CE Wireless MCU datasheet (Rev. C)	PDF \| HTML	2016年 7月 19日
*	Errata	CC2620 SimpleLink™ Wireless MCU Errata (Rev. A)		2018年 10月 31日
*	User guide	CC13x0, CC26x0 SimpleLink™ Wireless MCU Technical Reference Manual (Rev. I)		2020年 6月 30日
	Application note	Crystal Oscillator and Crystal Selection for the CC13xx, CC26xx, and CC23xx Family of Wireless MCUs (Rev. L)	PDF \| HTML	2025年 4月 21日
	Application note	CC2538, CC13xx, and CC26xx Serial Bootloader Interface (Rev. E)	PDF \| HTML	2024年 8月 6日
	Application note	CC13xx/CC26xx Hardware Configuration and PCB Design Considerations (Rev. H)	PDF \| HTML	2024年 5月 2日
	Application note	CE Regulations for SRDs Operating in License-Free 2.4GHz/5GHz Bands-WiFi Devices (Rev. A)	PDF \| HTML	2022年 10月 20日
	Application note	Ultra-Low Power Sensing Applications With CC13x2/CC26x2 (Rev. B)	PDF \| HTML	2020年 1月 27日
	Application note	Johanson Balun for the CC26xx Device Family		2017年 8月 7日
	User guide	CC26x0/CC13x0 SimpleLink™ Wireless MCU Power Management Software Development Ref (Rev. A)	PDF \| HTML	2017年 4月 17日
	Technical article	IoT is making buildings greener and more intelligent. Value versus affordability	PDF \| HTML	2017年 1月 4日
	White paper	Bringing Wireless Scalability to Intelligent Sensing Applications (Rev. B)		2016年 8月 25日
	Technical article	Touch it. Talk to it. Remote control solutions that will change how you interact w	PDF \| HTML	2016年 6月 29日
	Application note	Voice Over Remote Control		2016年 5月 19日
	White paper	A guide to SensorTag Hackathons: Resources		2016年 3月 8日
	More literature	CC2650RC Quick Start User's Guide		2016年 3月 8日
	Application note	Using the Wireless SimpleLink CC26xx in Ext Regulator Mode With the TPS62740		2015年 11月 19日
	Application note	CC2640 Wireless MCU DC Supply Evaluation		2015年 10月 5日
	Application note	Using GCC/GDB With SimpleLink CC26xx	PDF \| HTML	2015年 2月 23日

設計與開發

如需其他條款或必要資源，請按一下下方的任何標題以檢視詳細頁面 (如有)。

偵錯探測器

TMDSEMU200-U — XDS200 USB 偵錯探測器

XDS200 是為 TI 嵌入式裝置偵錯的偵錯探測器（模擬器）。對於大多數裝置，建議使用較新、成本較低的 XDS110 (www.ti.com/tool/TMDSEMU110-U)。XDS200 支援單一 Pod 中廣泛的標準（IEEE1149.1、IEEE1149.7、SWD）。所有 XDS 偵錯探針在所有配備嵌入式追蹤緩衝器 (ETB) 的 Arm® 與 DSP 處理器中均支援核心與系統追蹤。

XDS200 透過 TI 20 接腳連接器（配備適用 TI 14 接腳、Arm Cortex® 10 接腳和 Arm 20 接腳的多重轉接器）連接到目標電路板，並透過 USB2.0 高速 (...)

TI.com 無法提供

偵錯探測器

LB-3P-TRACE32-WIRELESS — 適用於無線連線的 Lauterbach TRACE32® 偵錯系統

Lauterbach 的 TRACE32® 工具是一套先進的軟硬體元件，可讓開發人員分析、最佳化及認證 TI 許多無線連線晶片。全球知名的嵌入式系統偵錯解決方案是完美的解決方案，適用於從早期的矽前 (pre-silicon) 開發，到產品認證和現場故障排除等所有開發階段：完整的晶片內建斷點支援；執行階段記憶體存取；快閃記憶體編程和基準計數器。所有內容都是可編寫指令碼，使開發人員能夠一再地重複相同的測試順序。Lauterbach 工具的直覺模組化設計為工程師提供現今最高的可用性能，以及可隨需求變化而調整和成長的系統。經認證的工具資格認證支援套件 (TQSK) 提供便利的全方位方式，鑒定 (...)

從：Lauterbach GmbH

View Options

開發套件

CC2650STK — SimpleLink™ Bluetooth 低功耗/多重標準 SensorTag

全新 SensorTag IoT 套件邀請您實現您的雲端連線產品構想。全新 SensorTag 現在包括 10 個採用微型紅色封裝的低功率 MEMS 感測器。此外也可透過 DevPack 進行擴充，以輕鬆新增您自己的感測器或致動器。

透過 Bluetooth 低功耗連接至雲端，並在 3 分鐘內將您的感測器資料上線。SensorTag 在開箱後就可透過 iOS 及 Android 應用程式立即使用，不需具備任何編程經驗就能開始使用。

全新的 SensorTag 以 CC2650 無線 MCU 為基礎，功耗較以往的 Bluetooth 低功耗產品降低 75%。如此一來，SensorTag (...)

TI.com 無法提供

驅動程式或資料庫

REMOTI — 符合 RF4CE 的通訊協定堆疊

RemoTI™ is the industry leading ZigBee RF4CE-compliant software architecture. Built on TI's well-proven IEEE 802.15.4 compliant TIMAC, RemoTI™ offers a simple, easy-to-use, intuitive software architectural framework and all of the tools, documentation, and support needed to build an RF4CE compliant (...)

使用指南: PDF

View Options

IDE、配置、編譯器或偵錯程式

CCSTUDIO-OPENOCD — OpenOCD Binary Releases

Pre-built binaries for the popular open-source OpenOCD debug stack.

支援產品和硬體

檢視 GitHub

下載選項

IDE、配置、編譯器或偵錯程式

SENSOR-CONTROLLER-STUDIO — Sensor Controller Studio

Sensor Controller Studio is used to write, test and debug code for the CC26xx/CC13xx Sensor Controller, enabling ultra-low power application design. The tool generates an interface driver consisting of C source files with the firmware image, associated definitions, and generic functions that allow (...)

支援產品和硬體

下載選項

軟體程式設計工具

FLASH-PROGRAMMER-2 — SmartRF Flash Programmer v2

SmartRF Flash Programmer 2 can be used to program the flash memory in Texas Instruments ARM based low-power RF wireless MCUs over the debug and serial interfaces. Check the list of supported products for compatibility. Uniflash can also be used to program any SimpleLink product.

SmartRF Flash (...)

支援產品和硬體

下載選項

支援軟體

PACKET-SNIFFER — SmartRF™ Packet Sniffer 2.18.1

The SmartRF Packet Sniffer is a PC software application that can display and store radio packets captured by a listening RF device. The capture device is connected to the PC via USB. Various RF protocols are supported. The Packet Sniffer filters and decodes packets and displays them in a convenient (...)

支援產品和硬體

下載

計算工具

SMARTRF-STUDIO-7 — SmartRF Studio

SmartRF™ Studio is a Windows application that helps designers of RF systems to easily evaluate the radio at an early stage in the design process for all TI CC1xxx and CC2xxx low-power RF devices. It simplifies generation of the configuration register values and commands, as well as practical (...)

支援產品和硬體

下載選項

設計工具

SIMPLELINK-2-4GHZ-DESIGN-REVIEW — Hardware Design Review Request Form for SimpleLink™ CC2xxx Devices

The SimpleLink hardware design review process provides a way to get in touch, one-on-one, with a subject matter expert that can help review your design and provide valuable feedback. A simple three-step process for requesting a review as well as links to relevant technical documentation and (...)

支援產品和硬體

下載

設計工具

SIMPLELINK-2-4GHZ-DESIGN-REVIEWS — SimpleLink™ CC2xxx 裝置的硬體設計審核

SimpleLink 硬體設計審核流程提供一對一接觸的方式，並由主題內容專家協助審查您的設計，提供您寶貴的意見。一個簡單的三步驟流程用於請求審查，以及相關技術文件和資源的連結，可在此處找到。

入門指南

一般設計問題應張貼在我們的 E2E 討論區中，然後才能要求 2.4 GHz 硬體設計審查。

請確實備妥下列必要文件，隨硬體設計審查申請表一起傳送：

確認產品頁上提供的所有硬體文件均已經過審查，例如產品規格表、設計指南、使用指南和其他硬體資源
電路圖的可攜式文件格式 (PDF) 版本可供檢閱
物料清單 (BOM) 可供檢閱
堆疊詳細資料可供檢閱
電路板設計的 Gerber 檔案 (含零件位置和參考指示項) (...)

View Options

Gerber 檔案

SimpleLink CC2650 EVM Kit 7ID (CC2650EM-7ID) v1.2.6 Design Files

SWRC298.ZIP (1803 KB)

下載

Gerber 檔案

SimpleLink CC2650 EVM Kit 4XS (CC2650EM-4XS) v1.0.4 Design Files

SWRC300.ZIP (1810 KB)

下載

Gerber 檔案

SimpleLink CC2650 EVM Kit 4XS_Ext_Reg (CC2650EM-4XS_Ext_Reg) v2.0.0 Design Files

SWRC301.ZIP (2184 KB)

下載

Gerber 檔案

SimpleLink CC2650 EVM Kit 4XD (CC2650EM-4XD) v1.0.3 Design Files

SWRC302.ZIP (1907 KB)

下載

Gerber 檔案

SimpleLink CC2650 EVM Kit MurBal (CC2650EM-MurBal) v1.0.1 Design Files

SWRC303.ZIP (1478 KB)

下載

Gerber 檔案

SimpleLink CC2650 EVM Kit JohBal (CC2650EM-JohBal) v2.0.0 Design Files

SWRC326.ZIP (351 KB)

下載

參考設計

TIDA-00374 — 可讓鈕釦電池壽命長達 10 年以上且適用於星狀網路的濕度及溫度感測器節點參考設計

此參考設計使用我們的奈米功率系統計時器，SimpleLink™ 超低功耗無線微控制器 (MCU) 平台和濕度感測技術，以展示占空比感測器終端節點的超低功耗方法。這些技術藉由標準 CR2032 鋰離子鈕釦型單芯電池，可大幅延長電池壽命，達 10 年以上。該設計包含系統設計技巧、詳細測試結果和關於快速啟動和執行設計的資訊。

Design guide: PDF

電路圖: PDF

參考設計

TIDC-CC2650STK-SENSORTAG — SimpleLink™ 多標準 CC2650 SensorTag™ 套件參考設計

全新的 SimpleLink™ 多標準 SensorTag 套件，協助您實現您的物聯網 (IoT) 產品構想。該套件在一個小型封裝中包含 10 個低功率 MEMS 感測器，並且可以透過 DevPacks 進行擴展，從而輕鬆添加您自己的感測器或致動器。

透過 Bluetooth® 連接雲端，並在三分鐘內於線上取得感測器資料。SensorTag 在開箱後即可透過 iOS 及 Android 應用程式立即使用，不需具備任何編程經驗就能上手。

全新 SensorTag 以 CC2650 無線微控制器 (MCU) 為基礎，相較於先前的 Bluetooth 產品，可減少 75% (...)

使用指南: PDF

電路圖: PDF

參考設計

CC2650EM-MURBAL-RD — CC2650EM-MurBal 參考設計

CC2650EM-MurBal 參考設計包含 CC2650 評估模組的電路圖與佈局檔案，採用 5x5mm 封裝與來自 Murata 的整合式 0603 Balun。該參考設計展示了用於 CC2650 去耦和射頻配置的精湛技術。為獲得最佳 RF 性能，應準確複製此參考設計（包含線路圖與佈局）。