CC3100
- CC3100 SimpleLink Wi-Fi Consists of Wi-Fi
Network Processor and Power-Management
Subsystems - Wi-Fi CERTIFIED™ Chip
- Wi-Fi Network Processor Subsystem
- Featuring Wi-Fi Internet-On-a-Chip™
- Dedicated ARM MCU
Completely Offloads Wi-Fi and Internet
Protocols from the External Microcontroller - Wi-Fi Driver and Multiple Internet Protocols in
ROM - 802.11 b/g/n Radio, Baseband, and Medium
Access Control (MAC), Wi-Fi Driver, and
Supplicant - TCP/IP Stack
- Industry-Standard BSD Socket Application
Programming Interfaces (APIs) - 8 Simultaneous TCP or UDP Sockets
- 2 Simultaneous TLS and SSL Sockets
- Industry-Standard BSD Socket Application
- Powerful Crypto Engine for Fast, Secure Wi-Fi
and Internet Connections with 256-Bit AES
Encryption for TLS and SSL Connections - Station, AP, and Wi-Fi Direct® Modes
- WPA2 Personal and Enterprise Security
- SimpleLink Connection Manager for
Autonomous and Fast Wi-Fi Connections - SmartConfig™ Technology, AP Mode, and
WPS2 for Easy and Flexible Wi-Fi Provisioning - TX Power
- 18.0 dBm @ 1 DSSS
- 14.5 dBm @ 54 OFDM
- RX Sensitivity
- –95.7 dBm @ 1 DSSS
- –74.0 dBm @ 54 OFDM
- Application Throughput
- UDP: 16 Mbps
- TCP: 13 Mbps
- Host Interface
- Interfaces with 8-, 16-, and 32-Bit MCU or
ASICs Over SPI or UART Interface - Low External Host Driver Footprint: Less Than
7KB of Code Memory and 700 B of RAM Memory
Required for TCP Client Application
- Interfaces with 8-, 16-, and 32-Bit MCU or
- Power-Management Subsystem
- Integrated DC-DC Supports a Wide Range of
Supply Voltage:- VBAT Wide-Voltage Mode: 2.1 to 3.6 V
- Preregulated 1.85-V Mode
- Advanced Low-Power Modes
- Hibernate with RTC: 4 µA
- Low-Power Deep Sleep (LPDS): 115 µA
- RX Traffic (MCU Active): 53 mA @
54 OFDM - TX Traffic (MCU Active): 223 mA @
54 OFDM, Maximum Power - Idle Connected: 690 µA @ DTIM = 1
- Integrated DC-DC Supports a Wide Range of
- Clock Source
- 40.0-MHz Crystal with Internal Oscillator
- 32.768-kHz Crystal or External RTC Clock
- Package and Operating Temperature
- 0.5-mm Pitch, 64-Pin, 9-mm × 9-mm QFN
- Ambient Temperature Range: –40°C to 85°C
Connect any low-cost, low-power microcontroller (MCU) to the Internet of Things (IoT). The CC3100 device is the industrys first Wi-Fi CERTIFIED chip used in the wireless networking solution. The CC3100 device is part of the new SimpleLink Wi-Fi family that dramatically simplifies the implementation of Internet connectivity. The CC3100 device integrates all protocols for Wi-Fi and Internet, which greatly minimizes host MCU software requirements. With built-in security protocols, the CC3100 solution provides a robust and simple security experience. Additionally, the CC3100 device is a complete platform solution including various tools and software, sample applications, user and programming guides, reference designs and the TI E2E™ support community. The CC3100 device is available in an easy-to-layout QFN package.
The Wi-Fi network processor subsystem features a Wi-Fi Internet-on-a-Chip and contains an additional dedicated ARM MCU that completely offloads the host MCU. This subsystem includes an 802.11 b/g/n radio, baseband, and MAC with a powerful crypto engine for fast, secure Internet connections with 256-bit encryption. The CC3100 device supports Station, Access Point, and Wi-Fi Direct modes. The device also supports WPA2 personal and enterprise security and WPS 2.0. This subsystem includes embedded TCP/IP and TLS/SSL stacks, HTTP server, and multiple Internet protocols.
The power-management subsystem includes integrated DC-DC converters supporting a wide range of supply voltages. This subsystem enables low-power consumption modes, such as the hibernate with RTC mode requiringabout 4 µA of current.
The CC3100 device can connect to any 8, 16, or 32-bit MCU over the SPI or UART Interface. The device driver minimizes the host memory footprint requirements requiring less than 7KB of code memory and 700 B of RAM memory for a TCP client application.
您可能會感興趣的類似產品
針腳對針腳的功能與所比較的裝置相同。
功能相似於所比較的產品。
技術文件
設計與開發
如需其他條款或必要資源,請按一下下方的任何標題以檢視詳細頁面 (如有)。
CC3100BOOST — SimpleLink™ Wi-Fi® CC3100 無線網路處理器 BoosterPack™ 插入式模組
特別說明:
若要更新 CC3100 裝置上的韌體、使用無線電性能工具、執行網路處理記錄以進行進階偵錯,或使用 TI SimpleLink™ Studio for CC3100 MCU 模擬器(PC 架構),您還需要進階模擬 BoosterPack (CC31XXEMUBOOST)。 建議至少需要一個 CC31XXEMUBOOST 電路板更新 CC3100BOOST 套件上的韌體。 這些套件在 TI Store 以折扣價格搭售。
SimpleLink™ Wi-Fi® CC3100 無線網路處理器 BoosterPack™ 外掛程式模組(採用 QFN 封裝的裝置)可用於連接至 TI (...)
CC3100MODBOOST — SimpleLink Wi-Fi CC3100 模組 BoosterPack
特別說明: 若要更新 CC3100 韌體、使用無線電性能工具、執行網路處理記錄以進行進階偵錯,或使用 TI 的 SimpleLink™ Studio for CC3100 MCU 模擬器(PC 架構),您還需要進階模擬 BoosterPack (CC31XXEMUBOOST)。建議至少需要一個 CC31XXEMUBOOST 電路板更新 CC3100MODBOOST 套件上的韌體。這些套件在 TI Store 以折扣價格搭售。
CC3100 模組已獲得 Wi-Fi® CERTIFIED® 與 FCC/IC/CE/TELEC 認證,可轉移至終端產品。
SimpleLink Wi-Fi CC3100 (...)
CC31XXEMUBOOST — 適用於 SimpleLink™ Wi-Fi® CC31xx 的進階模擬套件 BoosterPack™ 插入式模組
這款進階模擬 BoosterPack™ 外掛程式模組是適用於 SimpleLink™ Wi-Fi® CC31xx 無線網路處理器 BoosterPack 外掛程式模組的配件
此配件可用於:
- 將更新燒錄至 CC31xxBOOST
- 使用 CC3xxx 無線電工具評估 RF 性能
- 使用 SimpleLink™ Studio for CC31xx 開發 MCU 軟體 – PC 工具、文件和範例應用都可以可在 CC3100 軟體開發套件 (SDK) 中找到
本套件可提供三種配置供選購:
- CC3120-EMUBOOST-MSP432LP:在 CC3120 軟體開發套件 (SDK) 中執行所有軟體,並在 MSP432 (...)
DISCOVERY-ADAPT — 適用於 SimpleLink Wi-Fi CC31XX BoosterPack 插入式模組的 Discovery 轉接器基板
下載軟體以獲得 Discovery 轉接器的完整體驗,並開始進行開發。非 TI MCU SDK 附加元件包含使用 CC3100 Internet-on-a-chip™ 解決方案與 STM32 (...)
EK-TM4C129EXL — 適用於物聯網應用的 ARM® Cortex®-M4F 架構 MCU TM4C129E Crypto Connected LaunchPad™
由具備硬體加密加速器的 MCU 提供動力,Crypto Connected LaunchPad 可讓您開發從安全雲端連線、建築/工廠自動化與智慧電網到工業控制的高性能、具備資料保護的連網 IoT 應用。
TM4C129E Crypto Connected LaunchPad 評估套件是適用於 ARM® Cortex-M4 架構微控制器的低成本平台。套件設計重點在於 TM4C129ENCPDT MCU,晶片內建加密加速硬體、10/100 乙太網路 MAC 與 PHY、USB 2.0、休眠模組、動作控制脈衝寬度調變與多種同步序列連線。
加密連線 LaunchPad 的開箱即用示範 (...)
CC3100SDK — CC3100 Software Development Kit (SDK), Service Pack, and Add-Ons
The CC3100 SDK contains drivers, many sample applications for Wi-Fi features and internet, and documentation needed to use the CC3100 Internet-on-a-chip™ solution. This SDK can be used with TI’s MSP-EXP430F5529LP LaunchPad, EK-TM4C123GXL LaunchPad, or EK-TM4C1294XL Connected LaunchPad. (...)
SIMPLESTUDIO — SimpleLink™ Studio for CC31xx
SimpleLink™ Studio for CC31xx 是一款基於 Windows 的軟體工具,用於協助開發微控制器的嵌入式網路應用與軟體。使用 SimpleLink Studio for CC31xx,嵌入式軟體開發人員可以使用任何桌上型 IDE(例如 Visual Studio 或 Eclipse)開發與測試應用程式,並使用 CC31xx BoosterPack 將其應用程式連接到雲端。接著可輕鬆將應用程式移植至任何微控制器。
透過 SimpleLink Wi-Fi CC31xx 解決方案,客戶現在可以靈活地將 Wi-Fi 添加到任何微控制器 (MCU)。 此 (...)
CC3XXXRADIOTEST — SimpleLink™ Wi-Fi® 無線電測試工具
SimpleLink™ Wi-Fi® 無線電測試工具是 Windows 軟體工具,適用於在開發和認證過程中對 SimpleLink Wi-Fi CC31xx 和 CC32xx 設計進行 RF 評估和測試。 可透過手動方式利用此工具將無線電設定為傳輸或接收模式,以啓用低階無線電測試功能。使用此工具需要熟悉並了解無線電電路理論,以及無線電測試方法。
SimpleLink Wi-Fi CC31xx 和 CC32xx 裝置專爲物聯網 (IoT) 而建立,包括晶片內建 Wi-Fi、網際網路和穩健執行的安全協定,無需先前的 Wi-Fi 經驗即可加快開發速度。 如需有關 CC31xx 和 CC32xx (...)
ENERGIA — Energia
Energia is an open source & community-driven integrated development environment (IDE) & software framework. Based on the Wiring framework, Energia provides an intuitive coding environment as well as a robust framework of easy-to-use functional APIs & libraries for programming a (...)
SIMPLELINK-ACADEMY-CC32XX — SimpleLink™ Academy for CC32xx
WIFISTARTERPRO — SimpleLink™ Wi-Fi® Starter Pro
在 iTunes App Store 上下載
在 Google Play 上下載
SimpleLink™ Wi-Fi® Starter Pro 行動應用程式是一款適用於 SimpleLink 配置的全新行動應用程式。它與在裝置端運行的嵌入式配置庫和範例配套使用。新的配置發行版是 TI 推薦的使用 SimpleLink Wi-Fi 產品進行 Wi-Fi 配置的解決方案。它採用先進的 AP 模式配置,並提供意見回餽和回退選項,以確保成功完成該程序。客戶可以同時使用嵌入式庫和行動庫,將其整合到他們的終端產品中。
EMBEDDED-PROGRAMMING — SimpleLink™ Wi-Fi® 嵌入式編程
每個板載嵌入式 CC3120/CC3220 裝置的產品,都必須連接一個序列快閃記憶體裝置。序列快閃記憶體必須進行格式化,並且至少需要編程為有必要軟體更新和額外功能的 Service Pack。以 CC3220 為例,在內部 MCU 處理器上執行的二進位映像也必須編程。序列快閃記憶體編程有多種現有選項:
- Uniflash – 基於 PC 的公用程式,提供映像建立和編程。內容透過 UART 編程。
- 無線傳輸編程 – 內容透過網路連接傳送。然而,這需要在生產過程中提前對序列快閃記憶體進行格式化。內容可透過主機介面(UART 或 SPI)編程。
- 工業快閃記憶體編程 – 使用 Uniflash (...)
UNIFLASH — UniFlash for most TI microcontrollers (MCUs) and mmWave sensors
UniFlash 是 TI 龐大 CCStudio™ 開發生態系統的一部分,是一款用於在 TI 微控制器與無線連線裝置上對晶片內快閃記憶體進行燒錄,以及在 TI 處理器上對板載快閃記憶體進行燒錄的軟體工具。UniFlash 提供圖形化介面與命令行介面,並可在桌面上或雲端中執行。
UniFlash 可從 CCStudio™ 開發人員區上的雲端執行,或在下載後於 Windows®、Linux® 和 macOS® 電腦中使用。
請注意,mmWave、AMx、K2G 和 J7 裝置不支援 macOS。AMx、K2G 和 J7 裝置僅於命令列上支援。
SIMPLELINK-CC3XXX-CERTIFICATION — SimpleLink™ CC3XXX 的無線電認證
您是否正在尋找 CC3XXX 認證支援?SIMPLELINK-CC3XXX-CERTIFCATION 提供相關資訊與支援,可協助 CC31XX、CC32XX 及 CC33XX 產品順利通過認證。在此頁面中,您將找到我們模組的最新認證報告以及我們為採用精簡晶片解決方案進行設計的客戶提供的評估板。
3P-WIRELESS-MODULES — 第三方無線模組搜尋工具
第三方無線模組搜尋工具協助開發人員識別符合其終端設備規格的產品,並採購可投入生產的無線模組。搜尋工具中包含的第三方模組供應商是獨立的第三方公司,擁有使用 TI 無線連接產品設計與製造無線模組的專業知識。
SWRR177 — CC3x00 Design Checklist
CC3XXX Wi-Fi 硬體設計審查流程提供一對一接觸的方式,並由主題內容專家協助審查您的設計,為您提供寶貴的意見。 在要求審查之前,請務必檢閱技術文件及相應產品頁上提供的設計與開發資源。產品頁資源可能不再需要進行設計審查。
一般設計問題應張貼在我們的 E2E 討論區中,然後才能要求 Wi-Fi 硬體設計審查。
對於以 CC33xx 和 CC35xx 為架構的設計,請將設計檔案申請直接以電子郵件傳送至 connectivity-wifi-hw-reviews@list.ti.com。您可以從這些裝置的相關產品頁請求存取這些裝置的設計文件。
對於其他所有 CC3xxx (...)
許多 TI 參考設計包含 CC3100
使用我們的參考設計選擇工具,以檢視並找出最適合您的應用和參數的設計。
| 封裝 | 針腳 | CAD 符號、佔位空間與 3D 模型 |
|---|---|---|
| VQFN (RGC) | 64 | Ultra Librarian |
訂購與品質
建議產品可能具有與此 TI 產品相關的參數、評估模組或參考設計。