線上培訓
SIMPLELINK-ACADEMY-CC32XX — SimpleLink™ Academy for CC32xx
SimpleLink Academy delivers easy-to-use training modules that span a wide range of topics for the SimpleLink Wi-Fi® evaluation platforms and software.
CC3130
- Integrated Wi-Fi and internet protocols
- Coexistence with BLE radios (CC13x2/CC26x2)
- Rich set of IoT security features helps developers protect data
- Low-power modes for battery powered application
- Network-assisted roaming
- Industrial temperature: –40°C to +85°C
- Transferable Wi-Fi Alliance certification
- Wi-Fi network processor subsystem:
- Wi-Fi core:
- 802.11b/g/n 2.4GHz
- Modes:
- Access point (AP)
- Station (STA)
- Wi-Fi Direct
- Security:
- WEP
- WPA™/ WPA2™ PSK
- WPA2 Enterprise
- WPA3™ Personal
- WPA3™ Enterprise
- Internet and application protocols:
- HTTPs server, mDNS, DNS-SD, DHCP
- IPv4 and IPv6 TCP/IP stack
- 16 BSD sockets (fully secured TLS v1.2 and SSL 3.0)
- Built-in power management subsystem:
- Configurable low-power profiles (always, intermittent, tag)
- Advanced low-power modes
- Integrated DC/DC regulators
- Wi-Fi core:
- Multilayered security features:
- Separate execution environments
- Networking security
- Device identity and key
- Hardware accelerator cryptographic engines (AES, DES, SHA/MD5, CRC)
- File-system security (encryption, authentication, access control)
- Initial secure programming
- Software tamper detection
- Certificate signing request (CSR)
- Unique per device key pair
- Application throughput:
- UDP: 16Mbps, TCP: 13Mbps
- Peak: 72Mbps
- Power-management subsystem:
- Integrated DC/DC converters support a wide range of supply voltage:
- VBAT wide-voltage mode: 2.1V to 3.6V
- VIO is always tied with VBAT
- Advanced low-power modes:
- Shutdown: 1µA, hibernate: 4µA
- Low-power deep sleep (LPDS): 120µA
- Idle connected (MCU in LPDS): 710µA
- RX traffic (MCU active): 53mA
- TX traffic (MCU active): 223mA
- Integrated DC/DC converters support a wide range of supply voltage:
- Wi-Fi TX power:
- 18.0dBm at 1 DSSS
- 14.5dBm at 54 OFDM
- Wi-Fi RX sensitivity:
- –96dBm at 1 DSSS
- –74.5dBm at 54 OFDM
- Clock source:
- 40.0MHz crystal with internal oscillator
- 32.768kHz crystal or external RTC
- RGK package
- 64-pin, 9mm × 9mm very thin quad flat nonleaded (VQFN) package, 0.5mm pitch
- Device supports SimpleLink™ MCU Platform developer’s ecosystem
Connect any microcontroller (MCU) to the Internet of Things (IoT) with the CC3130 device from Texas Instruments. The SimpleLink™ Wi-Fi CC3130 Internet-on-a chip™ device contains an Arm Cortex-M3 MCU dedicated to Wi-Fi® and internet protocols, in order to offload networking activities from the host MCU. The subsystem includes an 802.11b/g/n radio, baseband, and MAC with a powerful crypto engine for fast, secure Internet connections with 256-bit encryption and a built in power management for best in class low power performance.
The Wi-Fi CERTIFIED® CC3130 device dramatically simplifies the implementation of low-power, with the integrated Wi-Fi Alliance® IoT low power feature.
This generation introduces new capabilities that further simplify the connectivity of things to the internet. The main new features include:
- Bluetooth Low Energy and Wi-Fi 2.4GHz radio coexistence (CC13x2/CC26x2)
- Antenna selection
- Up to 16 concurrent secure sockets
- Certificate sign request (CSR)
- Online certificate status protocol (OCSP)
- Wi-Fi Alliance certified IoT power-saving features (such as BSS max idle, DMS, and proxy ARP)
- Hostless mode for offloading template packet transmissions
- Network-assisted roaming
The CC3130 device is delivered with a slim and user-friendly host driver to simplify the integration and development of networking applications. The host driver can easily be ported to most platforms and operating systems (OS). The driver has a small memory footprint and can run on 8-bit, 16-bit, or 32-bit microcontrollers with any clock speed (no performance or real-time dependency).
The CC3130 device is part of the SimpleLink™ MCU platform, a common, easy-to-use development environment based on a single core software development kit (SDK), rich tool set, reference designs, and E2E™ community which supports Wi-Fi®, Bluetooth® low energy, Sub-1GHz, and host MCUs. For more information, visit www.ti.com/simplelink.
技術文件
找不到結果。請清除您的搜尋條件，然後再試一次。
檢視所有 21 設計與開發
如需其他條款或必要資源，請按一下下方的任何標題以檢視詳細頁面 (如有)。
開發板
BOOSTXL-CC3135 — SimpleLink™ Wi-Fi® CC3135 雙頻無線網路處理器 BoosterPack™ 外掛程式模組
SimpleLink™ Wi-Fi® CC3135 無線網路處理器可提供使用者在任何微控制器 (MCU) 中加入 Wi-Fi 的彈性。CC3135 BoosterPack™ 外掛模組 (BOOSTXL-CC3135) 是一款可輕易連接至 TI 的 MCU Launchpad 套件（提供給 MSP-EXP432P401R 的軟體範例）的電路板，因此能快速進行軟體開發。此 BOOSTXL-CC3135 可插入進階模擬 BoosterPack (CC31xxEMUBOOST)，並可連接至模擬 MCU 和 SimpleLink Studio 的 PC。最後，此套件也可透過轉接器電路板連接至 TI 的 (...)
使用指南: PDF
應用軟體及架構
WIFISTARTERPRO — SimpleLink™ Wi-Fi® Starter Pro
在 iTunes App Store 上下載
在 Google Play 上下載
SimpleLink™ Wi-Fi® Starter Pro 行動應用程式是一款適用於 SimpleLink 配置的全新行動應用程式。它與在裝置端運行的嵌入式配置庫和範例配套使用。新的配置發行版是 TI 推薦的使用 SimpleLink Wi-Fi 產品進行 Wi-Fi 配置的解決方案。它採用先進的 AP 模式配置，並提供意見回餽和回退選項，以確保成功完成該程序。客戶可以同時使用嵌入式庫和行動庫，將其整合到他們的終端產品中。
在 Google Play 上下載
SimpleLink™ Wi-Fi® Starter Pro 行動應用程式是一款適用於 SimpleLink 配置的全新行動應用程式。它與在裝置端運行的嵌入式配置庫和範例配套使用。新的配置發行版是 TI 推薦的使用 SimpleLink Wi-Fi 產品進行 Wi-Fi 配置的解決方案。它採用先進的 AP 模式配置，並提供意見回餽和回退選項，以確保成功完成該程序。客戶可以同時使用嵌入式庫和行動庫，將其整合到他們的終端產品中。
IDE、配置、編譯器或偵錯程式
CC3XXXRADIOTEST — SimpleLink™ Wi-Fi® 無線電測試工具
SimpleLink™ Wi-Fi® 無線電測試工具是 Windows 軟體工具，適用於在開發和認證過程中對 SimpleLink Wi-Fi CC31xx 和 CC32xx 設計進行 RF 評估和測試。 可透過手動方式利用此工具將無線電設定為傳輸或接收模式，以啓用低階無線電測試功能。使用此工具需要熟悉並了解無線電電路理論，以及無線電測試方法。
SimpleLink Wi-Fi CC31xx 和 CC32xx 裝置專爲物聯網 (IoT) 而建立，包括晶片內建 Wi-Fi、網際網路和穩健執行的安全協定，無需先前的 Wi-Fi 經驗即可加快開發速度。 如需有關 CC31xx 和 CC32xx (...)
IDE、配置、編譯器或偵錯程式
CCSTUDIO — Code Composer Studio™ 整合式開發環境 (IDE)
Code Composer Studio 是適用於 TI 微控制器與處理器的整合式開發環境 (IDE)。它由一整套豐富的工具組成，可用於建立、除錯、分析及最佳化嵌入式應用程式。Code Composer Studio 支援 Windows®、Linux® 和 macOS® 平台。
Code Composer Studio 提供直覺式的使用者介面，引導使用者完成應用程式開發的每個步驟。它包含最佳化 C/C++ 編譯器、原始碼編輯器、專案建構環境、偵錯器、性能評測工具及其他多種功能。熟悉的工具和介面可讓您以簡單且輕鬆的方式開始開發。
Code Composer Studio 結合 Eclipse® (...)
作業系統 (OS)
TI-RTOS-MCU — TI-RTOS：適用於微控制器 (MCU) 的即時作業系統 (RTOS)
此頁面上的 TI-RTOS 套件僅適用於舊版產品，目前不提供支援。若 TI-RTOS 適用於新產品，TI-RTOS 將隨附於該產品的軟體開發套件 (SDK) 中。
利用 TI-RTOS 加速開發 MCU 應用程式
TI-RTOS 不需要從頭開始建立基本系統軟體功能，所以能加速開發時程。從即時多工的 TI-RTOS 核心，到完整的 RTOS 解決方案，TI-RTOS 一應俱全，更包括其他中介軟體元件、產品驅動程式和電源管理。TI-RTOS 搭配 TI 的超低功耗 MCU，可協助開發人員設計電池續航力更長的應用。藉由提供預先測試及預先整合的必要系統軟體元件，TI-RTOS (...)
使用指南: PDF
外掛程式
SIMPLELINK-SDK-WIFI-PLUGIN — SimpleLink™ software development kit (SDK) Wi-Fi® plug-in
The SimpleLink SDK Wi-Fi Plug-in contains drivers, many sample applications for Wi-Fi features and internet, and documentation needed to use the CC3120 or CC3135 Internet-on-a-chip™ solutions. This Plug-in is a companion software package that enables the use of a Wi-Fi radio on any standard (...)
支援產品和硬體
軟體程式設計工具
UNIFLASH — UniFlash for most TI microcontrollers (MCUs) and mmWave sensors
UniFlash is a software tool for programming on-chip flash on TI microcontrollers and wireless connectivity devices and on-board flash for TI processors. UniFlash provides both graphical and command-line interfaces.
UniFlash can be run from the cloud on the TI Developer Zone or downloaded and used (...)
支援產品和硬體
Gerber 檔案
CC3x20 SimpleLink™ Wi-Fi® and Internet of Things Design Checklist (Rev. F)
SWRU462F.ZIP (69 KB)
| 封裝 | 針腳 | CAD 符號、佔位空間與 3D 模型 |
|---|---|---|
| VQFN (RGK) | 64 | Ultra Librarian |
訂購與品質
內含資訊：
- RoHS
- REACH
- 產品標記
- 鉛塗層/球物料
- MSL 等級/回焊峰值
- MTBF/FIT 估算值
- 材料內容
- 認證摘要
- 進行中的可靠性監測
內含資訊：
- 晶圓廠位置
- 組裝地點
建議產品可能具有與此 TI 產品相關的參數、評估模組或參考設計。