CC3135
- Integrated dual-band Wi-Fi and internet protocols
- 802.11a/b/g/n: 2.4GHz and 5GHz
- FIPS 140-2 Level 1 certification
- Rich set of IoT security features helps developers protect data
- Low-power modes for battery powered application
- Coexistence with 2.4GHz radios
- Industrial temperature: –40°C to +85°C
- Transferable Wi-Fi Alliance certification
- Wi-Fi network processor subsystem:
- Wi-Fi core:
- 802.11a/b/g/n 2.4GHz and 5GHz
- Modes:
- Access point (AP)
- Station (STA)
- Wi-Fi Direct (only supported on 2.4GHz)
- Security:
- WEP
- WPA™/ WPA2™ PSK
- WPA2 Enterprise
- WPA3™ Personal
- WPA3™ Enterprise
- Internet and application protocols:
- HTTPs server, mDNS, DNS-SD, DHCP
- IPv4 and IPv6 TCP/IP stack
- 16 BSD sockets (fully secured TLS v1.2 and SSL 3.0)
- Built-in power management subsystem:
- Configurable low-power profiles (always, intermittent, tag)
- Advanced low-power modes
- Integrated DC/DC regulators
- Wi-Fi core:
- Multilayered security features:
- Separate execution environments
- Networking security
- Device identity and key
- Hardware accelerator cryptographic engines (AES, DES, SHA/MD5, CRC)
- Application-level security (encryption, authentication, access control)
- Initial secure programming
- Software tamper detection
- Secure boot
- Certificate signing request (CSR)
- Unique per device key pair
- Application throughput:
- UDP: 16Mbps, TCP: 13Mbps
- Peak: 72Mbps
- Power-management subsystem
- Integrated DC/DC converters support a wide range of supply voltage:
- VBAT wide-voltage mode: 2.1V to 3.6V
- VIO is always tied with VBAT
- Advanced low-power modes:
- Shutdown: 1µA, hibernate: 4µA
- Low-power deep sleep (LPDS): 120µA
- Idle connected (MCU in LPDS): 710µA
- RX traffic (MCU active): 53mA
- TX traffic (MCU active): 223mA
- Integrated DC/DC converters support a wide range of supply voltage:
- Wi-Fi TX power:
- 2.4GHz: 18.0dBm at 1 DSSS
- 5GHz: 18.1dBm at 6 OFDM
- Wi-Fi RX sensitivity:
- 2.4GHz: –96dBm at 1 DSSS
- 5GHz: –92dBm at 6 OFDM
- Clock source:
- 40.0MHz crystal with internal oscillator
- 32.768kHz crystal or external RTC
- RGK package
- 64-pin, 9mm × 9mm very thin quad flat nonleaded (VQFN) package, 0.5mm pitch
- Device supports SimpleLink™ MCU Platform developer’s ecosystem
Connect any microcontroller (MCU) to the Internet of Things (IoT) with the CC3135 device, a dual-band wireless network processor from Texas Instruments. The CC3135 Wi-Fi® Internet-on-a chip™ device contains an Arm Cortex-M3 MCU dedicated to Wi-Fi® and internet protocols, to offload networking activities from the host MCU. The subsystem includes a dual-band 802.11a/b/g/n radio, baseband, and MAC with a powerful crypto engine for fast, secure Internet connections with 256-bit encryption and a built-in power management for best-in-class low-power performance.
The Wi-Fi CERTIFIED® CC3135 device dramatically simplifies the implementation of low-power, with the integrated Wi-Fi Alliance® IoT low power feature.
This generation introduces new capabilities that further simplify the connectivity of things to the Internet. The main new features include:
- 802.11a (5GHz) support
- BLE/2.4GHz radio coexistence
- Antenna selection
- Enhanced security with FIPS 140-2 Level 1 certification and more. For exact status of FIPS certification for a specific part number, refer to https://csrc.nist.gov/publications/fips.
- Up to 16 concurrent secure sockets
- Certificate sign request (CSR)
- Online certificate status protocol (OCSP)
- Wi-Fi Alliance® certified for IoT applications with low-power capabilities and more
- Hostless mode for offloading template packet transmissions
- Improved fast scan
The CC3135 device is delivered with a slim and user-friendly host driver to simplify the integration and development of networking applications. The host driver can easily be ported to most platforms and operating systems (OS). The driver has a small memory footprint and can run on 8-bit, 16-bit, or 32-bit microcontrollers with any clock speed (no performance or real-time dependency).
The CC3135 device is part of the SimpleLink™ MCU platform, a common, easy-to-use development environment based on a single core software development kit (SDK), rich tool set, reference designs, and E2E™ community which supports Wi-Fi®, Bluetooth® low energy, Sub-1GHz and host MCUs. For more information, visit www.ti.com/simplelink.
技術文件
設計與開發
如需其他條款或必要資源,請按一下下方的任何標題以檢視詳細頁面 (如有)。
BOOSTXL-CC3135 — SimpleLink™ Wi-Fi® CC3135 雙頻無線網路處理器 BoosterPack™ 外掛程式模組
CC31XXEMUBOOST — 適用於 SimpleLink™ Wi-Fi® CC31xx 的進階模擬套件 BoosterPack™ 插入式模組
This advanced emulation BoosterPack™ plug-in module is an accessory for the SimpleLink™ Wi-Fi® CC31xx wireless network processor BoosterPack plug-in modules
This accessory can be used for:
- Flashing updates to the CC31xxBOOST
- Using the CC3xxx radio tool for RF performance evaluation
- Using (...)
WIFISTARTERPRO — SimpleLink™ Wi-Fi® Starter Pro
在 Google Play 上下載
SimpleLink™ Wi-Fi® Starter Pro 行動應用程式是一款適用於 SimpleLink 配置的全新行動應用程式。它與在裝置端運行的嵌入式配置庫和範例配套使用。新的配置發行版是 TI 推薦的使用 SimpleLink Wi-Fi 產品進行 Wi-Fi 配置的解決方案。它採用先進的 AP 模式配置,並提供意見回餽和回退選項,以確保成功完成該程序。客戶可以同時使用嵌入式庫和行動庫,將其整合到他們的終端產品中。
CC3XXXRADIOTEST — SimpleLink™ Wi-Fi® 無線電測試工具
SimpleLink Wi-Fi CC31xx 和 CC32xx 裝置專爲物聯網 (IoT) 而建立,包括晶片內建 Wi-Fi、網際網路和穩健執行的安全協定,無需先前的 Wi-Fi 經驗即可加快開發速度。 如需有關 CC31xx 和 CC32xx (...)
CCSTUDIO — Code Composer Studio™ 整合式開發環境 (IDE)
Code Composer Studio 提供直覺式的使用者介面,引導使用者完成應用程式開發的每個步驟。它包含最佳化 C/C++ 編譯器、原始碼編輯器、專案建構環境、偵錯器、性能評測工具及其他多種功能。熟悉的工具和介面可讓您以簡單且輕鬆的方式開始開發。
Code Composer Studio 結合 Eclipse® (...)
SIMPLELINK-SDK-WIFI-PLUGIN — SimpleLink™ software development kit (SDK) Wi-Fi® plug-in
The SimpleLink SDK Wi-Fi Plug-in contains drivers, many sample applications for Wi-Fi features and internet, and documentation needed to use the CC3120 or CC3135 Internet-on-a-chip™ solutions. This Plug-in is a companion software package that enables the use of a Wi-Fi radio on any standard (...)
支援產品和硬體
產品
Wi-Fi 產品
Arm Cortex-M4 MCU
低耗電 2.4GHz 產品
硬體開發
開發板
開發套件
EMBEDDED-PROGRAMMING — SimpleLink™ Wi-Fi® 嵌入式編程
- Uniflash – 基於 PC 的公用程式,提供映像建立和編程。內容透過 UART 編程。
- 無線傳輸編程 – 內容透過網路連接傳送。然而,這需要在生產過程中提前對序列快閃記憶體進行格式化。內容可透過主機介面(UART 或 SPI)編程。
- 工業快閃記憶體編程 – 使用 Uniflash (...)
UNIFLASH — UniFlash for most TI microcontrollers (MCUs) and mmWave sensors
UniFlash is a software tool for programming on-chip flash on TI microcontrollers and wireless connectivity devices and on-board flash for TI processors. UniFlash provides both graphical and command-line interfaces.
UniFlash can be run from the cloud on the TI Developer Zone or downloaded and used (...)
支援產品和硬體
產品
C2000 real-time microcontrollers
工業 mmWave 雷達感測器
汽車 mmWave 雷達感測器
MSP430 microcontrollers
Wi-Fi 產品
Arm Cortex-M4 MCU
Arm Cortex-M0+ MCU
Arm Cortex-R MCU
低耗電 2.4GHz 產品
汽車無線連線產品
Sub-1 GHz 無線 MCU
Audio & radar DSP SoCs
Multimedia & industrial networking SoCs
SIMPLELINK-CC3XXX-CERTIFICATION — SimpleLink™ CC3XXX 的無線電認證
SIMPLELINK-WIFI-DESIGN-REVIEWS — 適用於 SimpleLink™ Wi-Fi 裝置的硬體設計審查
一般設計問題應張貼在我們的 E2E 討論區中,然後才能要求 Wi-Fi 硬體設計審查。
對於以 CC3301 和 CC3300 為架構的設計,請將設計檔案申請直接以電子郵件傳送至 connectivity-wifi-hw-reviews@list.ti.com。您可以從這些裝置的相關產品頁請求存取這些裝置的設計文件。
對於其他所有 CC3xxx (...)
| 封裝 | 針腳 | CAD 符號、佔位空間與 3D 模型 |
|---|---|---|
| VQFN (RGK) | 64 | Ultra Librarian |
訂購與品質
- RoHS
- REACH
- 產品標記
- 鉛塗層/球物料
- MSL 等級/回焊峰值
- MTBF/FIT 估算值
- 材料內容
- 認證摘要
- 進行中持續性的可靠性監測
- 晶圓廠位置
- 組裝地點
建議產品可能具有與此 TI 產品相關的參數、評估模組或參考設計。