首頁 DLP 產品 工業數位微鏡裝置（DMD） UV (<420nm) DMD
首頁
DLP 產品
工業數位微鏡裝置（DMD）
UV (<420nm) DMD

DLP301S

現行

0.3 吋 WQHD 高功率近 UV DLP® 數位微鏡裝置 (DMD)

立即訂購
產品規格表

DLP301S

現行
產品規格表 立即訂購

產品詳細資料

Illumination wavelength (min) (nm) 400 Illumination wavelength (max) (nm) 550 Display resolution (max) WQHD (2560x1440) Pattern rate, binary (max) (Hz) 60 Pattern rate, 8-bit (max) (Hz) 60 Array diagonal (in) 0.3 Micromirror array size 1280 x 720 Micromirror pitch (mm) 0.0054 Micromirror array orientation Orthogonal Rating Catalog Operating temperature range (°C) 0 to 40
Illumination wavelength (min) (nm) 400 Illumination wavelength (max) (nm) 550 Display resolution (max) WQHD (2560x1440) Pattern rate, binary (max) (Hz) 60 Pattern rate, 8-bit (max) (Hz) 60 Array diagonal (in) 0.3 Micromirror array size 1280 x 720 Micromirror pitch (mm) 0.0054 Micromirror array orientation Orthogonal Rating Catalog Operating temperature range (°C) 0 to 40
DLP-S318 (FQS) 99 138.6 mm² (0 mm × 0 mm)
  • 0.3-Inch (7.93-mm) diagonal micromirror array
    • 1280 × 720 array of aluminum micrometer-sized mirrors, in an orthogonal layout
    • 3.6 Megapixels, 2560 × 1440 pixels on the resin
    • 5.4-micron micromirror pitch
    • ±17° micromirror tilt (relative to flat surface)
    • Side illumination for optimal efficiency and optical engine size
    • Polarization independent aluminum micromirror surface
  • 8-Bit SubLVDS input data bus
  • Dedicated DLPC1438 3D print controller and DLPA200x or DLPA300x PMIC/LED driver for reliable operation
  • 0.3-Inch (7.93-mm) diagonal micromirror array
    • 1280 × 720 array of aluminum micrometer-sized mirrors, in an orthogonal layout
    • 3.6 Megapixels, 2560 × 1440 pixels on the resin
    • 5.4-micron micromirror pitch
    • ±17° micromirror tilt (relative to flat surface)
    • Side illumination for optimal efficiency and optical engine size
    • Polarization independent aluminum micromirror surface
  • 8-Bit SubLVDS input data bus
  • Dedicated DLPC1438 3D print controller and DLPA200x or DLPA300x PMIC/LED driver for reliable operation

The DLP301S digital micromirror device (DMD) is a digitally controlled micro-opto-electromechanical system (MOEMS) spatial light modulator (SLM). When coupled to an appropriate optical system, the DMD displays a very crisp and high-quality image. This DMD is a component of the chipset comprising the DLP301S DMD, DLPC1438 3D Print controller, and DLPA200x/DLPA300x PMIC/LED driver. The compact physical size of this DMD coupled with the controller and the PMIC/LED driver provides a complete system solution that enables high output optical engines for fast, high resolution, reliable DLP 3D printers.

Learn more about TI DLP(R) 3D printing technology on the 3D printing and direct imaging products page.

The DLP advanced light control resources on ti.com accelerate time to market, which include reference designs, optical modules manufacturers, and DLP design network partners.

The DLP301S digital micromirror device (DMD) is a digitally controlled micro-opto-electromechanical system (MOEMS) spatial light modulator (SLM). When coupled to an appropriate optical system, the DMD displays a very crisp and high-quality image. This DMD is a component of the chipset comprising the DLP301S DMD, DLPC1438 3D Print controller, and DLPA200x/DLPA300x PMIC/LED driver. The compact physical size of this DMD coupled with the controller and the PMIC/LED driver provides a complete system solution that enables high output optical engines for fast, high resolution, reliable DLP 3D printers.

Learn more about TI DLP(R) 3D printing technology on the 3D printing and direct imaging products page.

The DLP advanced light control resources on ti.com accelerate time to market, which include reference designs, optical modules manufacturers, and DLP design network partners.
filter 尋找其它 UV (<420nm) DMD
下載 觀看有字幕稿的影片 影片

技術文件

找不到結果。請清除您的搜尋條件，然後再試一次。
檢視所有 3
重要文件 類型 標題 格式選項 下載最新的英文版本 日期
* 資料表 DLP301S 0.3-Inch 3.6-Megapixel DMD for TI DLP 3D Printers datasheet (Rev. A) PDF | HTML 2022/9/30
使用指南 DMD Diffraction Efficiency Calculator (Rev. B) PDF | HTML 2026/1/9
技術文章 3 key design decisions for any desktop 3D printer design PDF | HTML 2021/7/19

設計與開發

如需其他條款或必要資源，請按一下下方的任何標題以檢視詳細頁面 (如有)。

3D DMD 機械幾何

DLPM055 — DLP301S DMD With FQS Package (Series 318) 3D-CAD Geometry

支援產品和硬體
計算工具

DMD-DIFFRACTION-EFFICIENCY-CALCULATOR — Calculator helps model DMD diffraction patterns and diffraction efficiency

This calculator will be used to help customers understand how to model DMD diffraction patterns and efficiency with their specific DMD input parameters and is modeled to the customer’s specific design. Optical modules can also be used with the calculator.
支援產品和硬體
設計工具

DLP-OPTICAL-DESIGN — DLP-OPTICAL-DESIGN-GUIDELINES

The DLP optical design guidelines presentation provides a comprehensive overview of the guidelines specific to designing an optical system with DLP Products and will help enable customers in their design process.
支援產品和硬體
DMD 安裝設計

DLPR098 — Series 318 DMD Mounting and Electrical Interconnect Information

支援產品和硬體
參考設計

TIDA-080010 — 3.6 百萬像素 3D 印表機參考設計

此參考設計採用適用於 3D 印表機的 DLP® Pico® 產品 0.3 吋 360 萬像素近 UV 數位微鏡裝置 (DMD) 晶片組。此設計整合了 DLP300S 或 DLP301S 2560 x 1440 (WQHD) DMD、DLPC1438 顯示控制器與 DLPA2005 PMIC/LED 驅動器。DLPC1438 3D 列印控制器支援適用於 DLP 3D 印表機應用的 DLP300S 和 DLP301S 數位微鏡裝置 (DMD)，進行可靠的運作。DLPC1438 控制器在使用者電子產品和 DMD 間提供便利的介面，可啟用快速、高解析度、可靠的 DLP 3D 印表機。
支援產品和硬體
封裝 針腳 CAD 符號、佔位空間與 3D 模型
DLP-S318 (FQS) 99 Ultra Librarian
適用 TI 的評估品項標準條款與條件。

訂購與品質

建議產品可能具有與此 TI 產品相關的參數、評估模組或參考設計。

支援與培訓

內含 TI 工程師技術支援的 TI E2E™ 論壇

以英文檢視所有論壇主題

內容係由 TI 和社群貢獻者依「現狀」提供，且不構成 TI 規範。檢視使用條款。

若有關於品質、封裝或訂購 TI 產品的問題，請參閱 TI 支援。​​​​​​​​​​​​​​

影片