首頁 DLP 產品 工業數位微鏡裝置（DMD） 可見（420 至 700nm）DMD
首頁
DLP 產品
工業數位微鏡裝置（DMD）
可見（420 至 700nm）DMD

DLP5500

現行

0.55 吋 XGA DLP® 數位微型反射鏡元件 (DMD)

立即訂購
產品規格表

DLP5500

現行
產品規格表 立即訂購

產品詳細資料

Illumination wavelength (min) (nm) 420 Illumination wavelength (max) (nm) 700 Display resolution (max) XGA (1024x768) Pattern rate, binary (max) (Hz) 5000 Pattern rate, 8-bit (max) (Hz) 500 Array diagonal (in) 0.55 Micromirror array size 1024 x 768 Micromirror pitch (mm) 0.0108 Micromirror array orientation Orthogonal Rating Catalog Operating temperature range (°C) -20 to 90
Illumination wavelength (min) (nm) 420 Illumination wavelength (max) (nm) 700 Display resolution (max) XGA (1024x768) Pattern rate, binary (max) (Hz) 5000 Pattern rate, 8-bit (max) (Hz) 500 Array diagonal (in) 0.55 Micromirror array size 1024 x 768 Micromirror pitch (mm) 0.0108 Micromirror array orientation Orthogonal Rating Catalog Operating temperature range (°C) -20 to 90
DLP-S450 (FYA) 149 718.06 mm² (0 mm × 0 mm)
  • 0.55-inch micromirror array diagonal
    • 1024 × 768 array of aluminum, micrometer-sized mirrors (XGA resolution)
    • 10.8µm micromirror pitch
    • ±12° micromirror tilt angle (relative to flat state)
    • Designed for corner illumination
  • Designed for use with broadband visible light (420nm–700nm):
    • Window transmission 97% (single pass, through two window surfaces)
    • Micromirror reflectivity 88%
    • Array diffraction efficiency 86%
    • Array fill factor 92%
  • 16-bit, low voltage differential signaling (LVDS) double data rate (DDR) input data bus
  • 200 MHz input data clock rate
  • Dedicated DLPC200 controller for high-speed pattern rates:
    • 5,000Hz (1-bit binary patterns)
    • 500Hz (8-bit grayscale patterns)
  • Dedicated DLPC900 controller for high-speed pattern rates:
    • 10,638.298Hz (1-bit binary patterns)
    • 266.453Hz (8-bit grayscale patterns)
  • Series 450 package characteristics:
    • Thermal area 18mm × 12mm enabling high on-screen lumens (>2000lm)
    • 149 micro pin grid array robust electrical connection
    • Package mates to Amphenol Intercon Systems 450-2.700-L-13.25-149 socket
  • 0.55-inch micromirror array diagonal
    • 1024 × 768 array of aluminum, micrometer-sized mirrors (XGA resolution)
    • 10.8µm micromirror pitch
    • ±12° micromirror tilt angle (relative to flat state)
    • Designed for corner illumination
  • Designed for use with broadband visible light (420nm–700nm):
    • Window transmission 97% (single pass, through two window surfaces)
    • Micromirror reflectivity 88%
    • Array diffraction efficiency 86%
    • Array fill factor 92%
  • 16-bit, low voltage differential signaling (LVDS) double data rate (DDR) input data bus
  • 200 MHz input data clock rate
  • Dedicated DLPC200 controller for high-speed pattern rates:
    • 5,000Hz (1-bit binary patterns)
    • 500Hz (8-bit grayscale patterns)
  • Dedicated DLPC900 controller for high-speed pattern rates:
    • 10,638.298Hz (1-bit binary patterns)
    • 266.453Hz (8-bit grayscale patterns)
  • Series 450 package characteristics:
    • Thermal area 18mm × 12mm enabling high on-screen lumens (>2000lm)
    • 149 micro pin grid array robust electrical connection
    • Package mates to Amphenol Intercon Systems 450-2.700-L-13.25-149 socket

Featuring over 750000 micromirrors, the high-resolution DLP5500 (0.55" XGA) digital micromirror device (DMD) is a spatial light modulator (SLM) that modulates the amplitude, direction, and/or phase of incoming light. This advanced light control technology has numerous applications in the industrial, medical, and consumer markets. The DLP5500 enables fine resolution for 3D printing applications.

Featuring over 750000 micromirrors, the high-resolution DLP5500 (0.55" XGA) digital micromirror device (DMD) is a spatial light modulator (SLM) that modulates the amplitude, direction, and/or phase of incoming light. This advanced light control technology has numerous applications in the industrial, medical, and consumer markets. The DLP5500 enables fine resolution for 3D printing applications.
filter 尋找其它 可見（420 至 700nm）DMD
下載 觀看有字幕稿的影片 影片

您可能會感興趣的類似產品

open-in-new 比較替代產品
功能相似於所比較的產品。
DLP6500FYE 現行 0.65 吋 1080p s600 DLP® 數位微鏡裝置 (DMD) Higher resolution
DLP6500FLQ 現行 0.65 吋 1080p A 型 DLP® 數位微型反射鏡元件 (DMD) Higher resolution, type A package 405 nm rating
DLP670S 現行 0.67 吋 2716x1600 DLP® 數位微型反射鏡元件 (DMD) Higher resolution
DLP9000 現行 0.9 吋 WQXGA DLP® 數位微型反射鏡元件 (DMD) Higher resolution, type A package 405 nm rating

技術文件

找不到結果。請清除您的搜尋條件，然後再試一次。
檢視所有 19
重要文件 類型 標題 格式選項 下載最新的英文版本 日期
* 資料表 DLP5500 DLP 0.55-Inch XGA Series 450 Digital Micromirror Device datasheet (Rev. H) PDF | HTML 2024/12/2
* 勘誤表 DLP Products Technical Advisory 2014/1/20
使用指南 DMD Diffraction Efficiency Calculator (Rev. B) PDF | HTML 2026/1/9
白皮書 Using Lasers With DLP DMD Technology (Rev. A) PDF | HTML 2025/8/25
Application brief Highly Scalable TI DLP Technology for 3D Machine Vision (Rev. A) PDF | HTML 2025/8/22
應用說明 Digital Micromirror Device Thermal Considerations Including Pulsed Optical Sources (Rev. B) PDF | HTML 2024/4/4
證書 DLPLCR55EVM EU Declaration of Conformity (DoC) 2023/6/15
應用說明 DMD Optical Efficiency for Visible Wavelengths (Rev. B) PDF | HTML 2023/4/10
應用說明 Wavelength Transmittance Considerations for DLP DMD Windows (Rev. E) 2019/12/17
應用說明 DMD Handling Specification (Rev. A) 2019/11/15
應用說明 Mounting Hardware and Quick Reference Guide for DLP® Advanced Light Control DMDs (Rev. A) PDF | HTML 2018/11/27
使用指南 DLPC200 SPI Slave Interface (Rev. C) 2018/3/23
應用說明 DMD 101: Introduction to Digital Micromirror Device (DMD) Technology (Rev. B) 2018/2/23
應用說明 Geometric Optics for DLP® 2013/12/5
應用說明 DLP LightCommander API Application Report (Rev. C) 2013/6/5
應用說明 DLP LightCommander API Reference Manual (Rev. C) 2013/5/13
應用說明 Using DLP® Development Kits for 3D Optical Metrology Systems 2011/5/13
應用說明 DLP® Series-450 DMD and System Mounting Concepts 2010/6/18
應用說明 Series 4xx DMD Cleaning Procedure 2010/6/18

設計與開發

如需其他條款或必要資源，請按一下下方的任何標題以檢視詳細頁面 (如有)。

開發板

DLPLCR55EVM — 適用 0.55 1024x768 S450 DLP® 數位微型反射鏡元件 (DMD) 的 DLP5500 評估模組

此 DLP 評估模組 (EVM) 內建 DLP5500，是一款 0.55 吋 2xLVDS DMD，內含具 10.8-µm 節距的 1024 x 768 微鏡。與 DLPLCRC900EVM 配對時，使用者可透過高達 5,000 Hz 的 1 位元模式速率掌控像素準確度。對於需要最高解析度 DMD 和進階模式控制的設計人員而言，DLPLCR55EVM 是正確的評估選擇。

使用指南: PDF | HTML
支援產品和硬體
有庫存
限制：
??asset.out-of-stock-ti_zh_TW??
無法提供
開發板

DLPLCRC900EVM — DLP® LightCrafter™ 單 DLPC900 評估模組

此 DLP 評估模組 (EVM) 內建單一 DLPC900 數位微鏡裝置 (DMD) 控制器，允許對 DLPLCR65EVM 和其他相容 DMD EVM 進行可配置控制。配備輸入/輸出觸發器，可方便與攝影機、感測器或其他週邊設備同步。額外的靈活性為工業、醫療、計量、安全、電信和儀器應用提供了多樣化的架構。

對於需要高度靈活的開發套件，以將 DLP 技術融入各種光源操控應用的設計人員而言，DLPLCRC900EVM 是正確的評估選擇。

使用指南: PDF | HTML
支援產品和硬體
有庫存
限制：
??asset.out-of-stock-ti_zh_TW??
無法提供
應用軟體及架構

DLPR200-API-APPSW — Application Programming Interface (API) for DLPC200 Controller

The DLP 0.55 XGA Chipset contains DLP5500, DLPC200 and DLPA200. To enable broad functionality of the chipset, TI is offering DLPC200 configuration and support software. This provides developers the flexibility to time and control the DLP5500 micromirrors for a variety of applications.

支援產品和硬體
韌體

DLPC900REF-SW — DLP® LightCrafter 6500 and 9000 Firmware and Software Bundle

德州儀器提供可免費下載的軟體與韌體，讓開發人員能夠透過靈活的進階方式控制 DLP LightCrafter 6500 與 DLP LightCrafter 9000 EVM。參考設計文件讓客戶能夠基於 DLP6500 與 DLP9000 晶片組開發客製化產品。

此軟體包包含以下元件：

  • DLPC900REF-GUI：軟體套件包括適用於 PC 架構圖形使用者介面 (GUI) 的可執行檔案，可輕鬆透過 USB 與 DLPC900 控制器進行通訊。GUI 是使用 QT 函式庫和 QT Creator 開發的。
  • DLPC900REF-JTAG：JTAG 快閃記憶體編程器讓開發人員能夠將 DLPR900 (...)
支援產品和硬體
韌體

DLPR200-FW — DLPR200 Configuration Firmware for the DLPC200 Controller

The DLP 0.55 XGA Chipset contains DLP5500, DLPC200 and DLPA200. To enable broad functionality of the chipset, TI is offering DLPC200 configuration and support software. This provides developers the flexibility to time and control the DLP5500 micromirrors for a variety of applications.

支援產品和硬體
韌體

DLPR900PROM — DLPC900 Configuration and Support Firmware

The DLPR900 configuration and support firmware enables broad functionality of the DLPC900 digital controller. The DLPC900 offers reliable operation of DLP670S, DLP6500FYE, DLP6500FLQ, and DLP9000 digital micromirror devices (DMDs). Combined with the DLPC900 controller, the DLPR900 firmware (...)

支援產品和硬體
模擬型號

DLP5500 IBIS Model

DLPC064.ZIP (32 KB) - IBIS 模型
支援產品和硬體
3D DMD 機械幾何

DLPM046 — DLP550JE/DLP5500 DMD With FYA Package (Series 450) 3D-CAD Geometry

支援產品和硬體
計算工具

DMD-DIFFRACTION-EFFICIENCY-CALCULATOR — Calculator helps model DMD diffraction patterns and diffraction efficiency

This calculator will be used to help customers understand how to model DMD diffraction patterns and efficiency with their specific DMD input parameters and is modeled to the customer’s specific design. Optical modules can also be used with the calculator.
支援產品和硬體
設計工具

DLP-OMM-SEARCH — DLP® 產品第三方搜尋工具

To best meet your design needs and accelerate your time-to-market, DLP® Products works with a variety of third parties to help with everything from optical modules and hardware design to specialty software and other production services. Download one or both search tools listed below to quickly (...)

支援產品和硬體
設計工具

DLP-OPTICAL-DESIGN — DLP-OPTICAL-DESIGN-GUIDELINES

The DLP optical design guidelines presentation provides a comprehensive overview of the guidelines specific to designing an optical system with DLP Products and will help enable customers in their design process.
支援產品和硬體
設計工具

DLPLCR55EVM-DESIGN-TOOL — DLPLCR55EVM Design Files

Design files include the Schematic, BOM, and PCB layout of the DLPLCR55EVM board.
支援產品和硬體
設計工具

DLI-3P-ACCESSORIES — 適用於 DLP® 產品的 DLi 配件和組件

Digital Light Innovations (DLi) offers accessories, boards, and assemblies for development and production with DLP® Products. Examples include DMD controller boards, DMD board assemblies, flex cables, DMD mounting hardware assemblies, LED driver boards, and LED & fiber illumination assemblies.
  • (...)
從：Digital Light Innovations
支援產品和硬體
DMD 安裝設計

DLP-SERIES-450-MOUNTING — Series 450 DMD mounting and electrical interconnect information

This file includes drawings and 3D-CAD models for Series 450 DMD mounting concept(s). Information is also included for the socket/interposer used to connect the DMD to a PCB.
支援產品和硬體
DMD 安裝設計

DLPC132 — Series 450 DMD Mounting & Electrical Interconnect Information

支援產品和硬體
DMD 安裝設計

DLPR046 — Series 450 DMD Mounting and Electrical Interconnect Information

支援產品和硬體
光學設計

DLPR091 — DLP5500 LightCommander Zemax File

Zemax files for the LightCommander DLP5500
支援產品和硬體
封裝 針腳 CAD 符號、佔位空間與 3D 模型
DLP-S450 (FYA) 149 Ultra Librarian
適用 TI 的評估品項標準條款與條件。

訂購與品質

建議產品可能具有與此 TI 產品相關的參數、評估模組或參考設計。

支援與培訓

內含 TI 工程師技術支援的 TI E2E™ 論壇

以英文檢視所有論壇主題

內容係由 TI 和社群貢獻者依「現狀」提供，且不構成 TI 規範。檢視使用條款。

若有關於品質、封裝或訂購 TI 產品的問題，請參閱 TI 支援。​​​​​​​​​​​​​​

影片