首頁 DLP 產品 工業數位微鏡裝置（DMD） 可見（420 至 700nm）DMD
首頁
DLP 產品
工業數位微鏡裝置（DMD）
可見（420 至 700nm）DMD

DLP9000

現行

0.9 吋 WQXGA DLP® 數位微型反射鏡元件 (DMD)

立即訂購
產品規格表

DLP9000

現行
產品規格表 立即訂購

產品詳細資料

Illumination wavelength (min) (nm) 400 Illumination wavelength (max) (nm) 700 Display resolution (max) WQXGA (2560x1600) Pattern rate, binary (max) (Hz) 9523 Pattern rate, 8-bit (max) (Hz) 1031 Array diagonal (in) 0.9 Micromirror array size 2560 x 1600 Micromirror pitch (mm) 0.0076 Micromirror array orientation Orthogonal Rating Catalog Operating temperature range (°C) 0 to 70
Illumination wavelength (min) (nm) 400 Illumination wavelength (max) (nm) 700 Display resolution (max) WQXGA (2560x1600) Pattern rate, binary (max) (Hz) 9523 Pattern rate, 8-bit (max) (Hz) 1031 Array diagonal (in) 0.9 Micromirror array size 2560 x 1600 Micromirror pitch (mm) 0.0076 Micromirror array orientation Orthogonal Rating Catalog Operating temperature range (°C) 0 to 70
DLP-TYPEA.9 (FLS) 355 1777.4656 mm² (0 mm × 0 mm)
  • High Resolution 2560×1600 (WQXGA) Array
    • > 4 Million Micromirrors
    • 7.56-µm Micromirror Pitch
    • 0.9-Inch Micromirror Array Diagonal
    • ±12° Micromirror Tilt Angle (Relative to Flat State)
    • Designed for Corner Illumination
    • Integrated Micromirror Driver Circuitry
    • Two High Speed Options
  • DLP9000X With a Single DLPC910 Digital Controller
    • 480 MHz Input Data Clock Rate
    • Up to 61 Giga-Bits Per Second (with Continuous Streaming Input Data)
    • Up to 14989 Hz (1-Bit Binary Patterns)
    • Up to 1873 Hz (8-Bit Gray Patterns With Illumination Modulation)
  • DLP9000 with Dual DLPC900 Digital Controllers
    • 400 MHz Input Data Clock Rate
    • Up to 38 Giga-Bits per Second (With Up to 400 Pre-Stored Binary Patterns)
    • Up to 9523 Hz (1-Bit Binary Patterns)
    • Up to 1031 Hz (8-Bit Gray Patterns Pre- Loaded With Illumination Modulation), External Input Up to 360 Hz
  • Designed for Use With Broad Wavelength Range
    • 400 nm to 700 nm
    • Window Transmission 95% (Single Pass, Through Two Window Surfaces)
    • Micromirror Reflectivity 88%
    • Array Diffraction Efficiency 86%
    • Array Fill Factor 92%
  • High Resolution 2560×1600 (WQXGA) Array
    • > 4 Million Micromirrors
    • 7.56-µm Micromirror Pitch
    • 0.9-Inch Micromirror Array Diagonal
    • ±12° Micromirror Tilt Angle (Relative to Flat State)
    • Designed for Corner Illumination
    • Integrated Micromirror Driver Circuitry
    • Two High Speed Options
  • DLP9000X With a Single DLPC910 Digital Controller
    • 480 MHz Input Data Clock Rate
    • Up to 61 Giga-Bits Per Second (with Continuous Streaming Input Data)
    • Up to 14989 Hz (1-Bit Binary Patterns)
    • Up to 1873 Hz (8-Bit Gray Patterns With Illumination Modulation)
  • DLP9000 with Dual DLPC900 Digital Controllers
    • 400 MHz Input Data Clock Rate
    • Up to 38 Giga-Bits per Second (With Up to 400 Pre-Stored Binary Patterns)
    • Up to 9523 Hz (1-Bit Binary Patterns)
    • Up to 1031 Hz (8-Bit Gray Patterns Pre- Loaded With Illumination Modulation), External Input Up to 360 Hz
  • Designed for Use With Broad Wavelength Range
    • 400 nm to 700 nm
    • Window Transmission 95% (Single Pass, Through Two Window Surfaces)
    • Micromirror Reflectivity 88%
    • Array Diffraction Efficiency 86%
    • Array Fill Factor 92%

Featuring over 4 million micromirrors, the high resolution DLP9000 and DLP9000X digital micromirror devices (DMDs) are spatial light modulators (SLMs) that modulate the amplitude, direction, and/or phase of incoming light. This advanced light control technology has numerous applications in the industrial, medical, and consumer markets. The streaming nature of the DLP9000X and its DLPC910 controller enable very high speed continuous data streaming for lithographic applications. Both DMDs enable large build sizes and fine resolution for 3D printing applications. The high resolution provides the direct benefit of scanning larger objects for 3D machine vision applications.

Featuring over 4 million micromirrors, the high resolution DLP9000 and DLP9000X digital micromirror devices (DMDs) are spatial light modulators (SLMs) that modulate the amplitude, direction, and/or phase of incoming light. This advanced light control technology has numerous applications in the industrial, medical, and consumer markets. The streaming nature of the DLP9000X and its DLPC910 controller enable very high speed continuous data streaming for lithographic applications. Both DMDs enable large build sizes and fine resolution for 3D printing applications. The high resolution provides the direct benefit of scanning larger objects for 3D machine vision applications.
filter 尋找其它 可見（420 至 700nm）DMD
下載 觀看有字幕稿的影片 影片

您可能會感興趣的類似產品

open-in-new 比較替代產品
功能相似於所比較的產品。
DLP6500FYE 現行 0.65 吋 1080p s600 DLP® 數位微鏡裝置 (DMD) Faster pattern rate
DLP5500 現行 0.55 吋 XGA DLP® 數位微型反射鏡元件 (DMD) Lower price
DLP670S 現行 0.67 吋 2716x1600 DLP® 數位微型反射鏡元件 (DMD) Higher resolution
DLP6500FLQ 現行 0.65 吋 1080p A 型 DLP® 數位微型反射鏡元件 (DMD) Faster pattern rate

技術文件

找不到結果。請清除您的搜尋條件，然後再試一次。
檢視所有 16
重要文件 類型 標題 格式選項 下載最新的英文版本 日期
* 資料表 DLP9000 Family of 0.9 WQXGA Type A DMDs datasheet (Rev. B) PDF | HTML 2016/10/31
* 勘誤表 DLP Products Technical Advisory - DLPC900, DLP9000, DLP6500 2019/9/25
使用指南 DMD Diffraction Efficiency Calculator (Rev. B) PDF | HTML 2026/1/9
白皮書 Using Lasers With DLP DMD Technology (Rev. A) PDF | HTML 2025/8/25
更多文件說明 TI DLP Technology for Lithography (Rev. F) 2025/8/22
應用說明 System Design Considerations Using TI DLP Technology Down to 400 nm (Rev. A) PDF | HTML 2025/8/1
應用說明 Digital Micromirror Device Thermal Considerations Including Pulsed Optical Sources (Rev. B) PDF | HTML 2024/4/4
應用說明 DMD Optical Efficiency for Visible Wavelengths (Rev. B) PDF | HTML 2023/4/10
應用說明 Wavelength Transmittance Considerations for DLP DMD Windows (Rev. E) 2019/12/17
應用說明 Mounting Hardware and Quick Reference Guide for DLP® Advanced Light Control DMDs (Rev. A) PDF | HTML 2018/11/27
技術文章 Capture, imagine, create: Enabling highly-accurate desktop 3D printing and portabl PDF | HTML 2018/7/10
應用說明 DMD 101: Introduction to Digital Micromirror Device (DMD) Technology (Rev. B) 2018/2/23
Product overview TI DLP® Technology for 3D Machine Vision (Rev. C) 2016/4/8
技術文章 Printing up the future of innovation with direct imaging lithography PDF | HTML 2015/12/29
Product overview TI DLP Technology For 3D Printing (Rev. F) PDF | HTML 2015/1/28
應用說明 Geometric Optics for DLP® 2013/12/5

設計與開發

如需其他條款或必要資源，請按一下下方的任何標題以檢視詳細頁面 (如有)。

開發板

DLPLCR90EVM — DLP® 0.90 吋、WQXGA、A 型數位微型反射鏡元件 (DMD) 評估模組

此 DLP 評估模組 (EVM) 內建 DLP9000，這是一款 0.9 吋的 2xLVDS 數位微鏡裝置 (DMD)，內含具 7.56-µm 節距的 2560 x 1600 微鏡。與 DLPLCRC900DEVM 配對時，使用者可透過高達 9,523 Hz 的 1 位元模式速率掌控像素準確度。

對於需要高度靈活的開發套件，以將 DLP 技術融入各種光源操控應用的設計人員而言，DLPLCR90EVM 是正確的評估選擇。此 EVM 是達成 DLP 高速可見光系列中解析度、光通量和亮度最大化的解決方案的簡單途徑。

使用指南: PDF | HTML
支援產品和硬體
有庫存
限制：
??asset.out-of-stock-ti_zh_TW??
無法提供
開發板

DLPLCRC900EVM — DLP® LightCrafter™ 單 DLPC900 評估模組

此 DLP 評估模組 (EVM) 內建單一 DLPC900 數位微鏡裝置 (DMD) 控制器，允許對 DLPLCR65EVM 和其他相容 DMD EVM 進行可配置控制。配備輸入/輸出觸發器，可方便與攝影機、感測器或其他週邊設備同步。額外的靈活性為工業、醫療、計量、安全、電信和儀器應用提供了多樣化的架構。

對於需要高度靈活的開發套件，以將 DLP 技術融入各種光源操控應用的設計人員而言，DLPLCRC900EVM 是正確的評估選擇。

使用指南: PDF | HTML
支援產品和硬體
有庫存
限制：
??asset.out-of-stock-ti_zh_TW??
無法提供
開發板

INV-3P-TWOWAVE — 適用於雙通道平行或序列光曝光的 In-Vision Twowave DLP9000 光引擎模組

In-Vision’s Twowave DLP light engine module offers native WQXGA/2K (2560 x 1600 pixels) resolution based on the DLP9000 advanced light control chipset. It combines 2 LEDs with 1 DMD and allows for parallel or sequential light exposure at different wavelengths (365nm and 460nm).

支援產品和硬體
開發板

DLI-3P-DLI9000 — 適用於 DLP9000 的 DLi 3DLP9000 光引擎

DLi’s 3DLP9000 is a DLP® light engine designed with the professional-grade DLP 3D printer in mind. Based on the DLP9000 chipset, the 3DLP9000 offers over 4 million pixel resolution, enabling larger build areas for DLP 3D printers.
使用指南: PDF
從：Digital Light Innovations
支援產品和硬體
開發板

VISI-3P-LRS-WQ — Visitech LUXBEAM 快速系統 WQ

The LUXBEAM® Rapid System LRS-WQ is a DLP® technology based stereo lithography sub-system specifically designed for professional 3D printing and Additive Manufacturing systems. With the robust and reliable high resolution DLP9000 WQXGA chip, the LRS-WQ offers long lifetime and low (...)

從：VISITECH
支援產品和硬體
光學模組

INV-3P-FIREBIRD — 具有 DLP9000 的 ‌IN-VISION Firebird 高性能光引擎

In-Vision 的 Firebird 光學模組支援 DLP9000，並具備 2560x1600 像素的原生解析度，以及僅 7.6 µm 的微型反射鏡間距尺寸。針對深藍色 LED 照明最佳化。Firebird 可讓結構化光源應用具有高像素解析度和引人注目的光學性能。投影裝置具有多個可更換的鏡頭組件選項，以滿足個別應用需求。In-Vision 也可以設計和製造自訂鏡頭解決方案。應用領域：3D 列印、微影、生物工程以及其他工業和科學應用。

從：IN-VISION Technologies AG
支援產品和硬體
光學模組

INV-3P-HELIOS — 使用 DLP9000 的 In-Vision Helios、積層製造光引擎

Helios 專爲基於 DLP® 技術的 3D 列印而設計，將 In-Vision 的新型專有高功率照明模組與高性能光學元件相結合。Helios 以 TI 的 DLP9000 為基礎，提供高達 12W 的輸出功率，並有助於進行具成本效益的印刷，實現以新材料為基礎的應用，以及進一步使增材製造符合序列生產的資格。應用領域：3D 列印、微影、生物工程以及其他工業和科學應用。

從：IN-VISION Technologies AG
支援產品和硬體
韌體

DLPC900REF-SW — DLP® LightCrafter 6500 and 9000 Firmware and Software Bundle

德州儀器提供可免費下載的軟體與韌體，讓開發人員能夠透過靈活的進階方式控制 DLP LightCrafter 6500 與 DLP LightCrafter 9000 EVM。參考設計文件讓客戶能夠基於 DLP6500 與 DLP9000 晶片組開發客製化產品。

此軟體包包含以下元件：

  • DLPC900REF-GUI：軟體套件包括適用於 PC 架構圖形使用者介面 (GUI) 的可執行檔案，可輕鬆透過 USB 與 DLPC900 控制器進行通訊。GUI 是使用 QT 函式庫和 QT Creator 開發的。
  • DLPC900REF-JTAG：JTAG 快閃記憶體編程器讓開發人員能夠將 DLPR900 (...)
支援產品和硬體
韌體

DLPR900PROM — DLPC900 Configuration and Support Firmware

The DLPR900 configuration and support firmware enables broad functionality of the DLPC900 digital controller. The DLPC900 offers reliable operation of DLP670S, DLP6500FYE, DLP6500FLQ, and DLP9000 digital micromirror devices (DMDs). Combined with the DLPC900 controller, the DLPR900 firmware (...)

支援產品和硬體
模擬型號

DLP9000FLS IBIS Model

DLPM009.ZIP (23 KB) - IBIS 模型
支援產品和硬體
3D DMD 機械幾何

DLPM064 — DLP9000/9000X/9000XUV DMD With FLS Package (Type-A) 3D-CAD Geometry

支援產品和硬體
計算工具

DMD-DIFFRACTION-EFFICIENCY-CALCULATOR — Calculator helps model DMD diffraction patterns and diffraction efficiency

This calculator will be used to help customers understand how to model DMD diffraction patterns and efficiency with their specific DMD input parameters and is modeled to the customer’s specific design. Optical modules can also be used with the calculator.
支援產品和硬體
設計工具

DLP-OMM-SEARCH — DLP® 產品第三方搜尋工具

To best meet your design needs and accelerate your time-to-market, DLP® Products works with a variety of third parties to help with everything from optical modules and hardware design to specialty software and other production services. Download one or both search tools listed below to quickly (...)

支援產品和硬體
設計工具

DLP-OPTICAL-DESIGN — DLP-OPTICAL-DESIGN-GUIDELINES

The DLP optical design guidelines presentation provides a comprehensive overview of the guidelines specific to designing an optical system with DLP Products and will help enable customers in their design process.
支援產品和硬體
設計工具

DLI-3P-ACCESSORIES — 適用於 DLP® 產品的 DLi 配件和組件

Digital Light Innovations (DLi) offers accessories, boards, and assemblies for development and production with DLP® Products. Examples include DMD controller boards, DMD board assemblies, flex cables, DMD mounting hardware assemblies, LED driver boards, and LED & fiber illumination assemblies.
  • (...)
從：Digital Light Innovations
支援產品和硬體
DMD 安裝設計

DLPR106 — TypeA 9Size Traditional DMD Mounting and Electrical Interconnect Information

支援產品和硬體
封裝 針腳 CAD 符號、佔位空間與 3D 模型
DLP-TYPEA.9 (FLS) 355 Ultra Librarian
適用 TI 的評估品項標準條款與條件。

訂購與品質

建議產品可能具有與此 TI 產品相關的參數、評估模組或參考設計。

支援與培訓

內含 TI 工程師技術支援的 TI E2E™ 論壇

以英文檢視所有論壇主題

內容係由 TI 和社群貢獻者依「現狀」提供，且不構成 TI 規範。檢視使用條款。

若有關於品質、封裝或訂購 TI 產品的問題，請參閱 TI 支援。​​​​​​​​​​​​​​

影片系列

觀看所有影片

影片