產品詳細資料

Rating Catalog Architecture Gate driver Control interface 1xPWM, 3xPWM, 6xPWM Gate drive (A) 1 Vs (min) (V) 6 Vs ABS (max) (V) 65 Features Buck Step Down Converter, Current sense Amplifier, Hardware Management I/F, SPI/I2C, Smart Gate Drive Operating temperature range (°C) -40 to 125
Rating Catalog Architecture Gate driver Control interface 1xPWM, 3xPWM, 6xPWM Gate drive (A) 1 Vs (min) (V) 6 Vs ABS (max) (V) 65 Features Buck Step Down Converter, Current sense Amplifier, Hardware Management I/F, SPI/I2C, Smart Gate Drive Operating temperature range (°C) -40 to 125
VQFN (RGZ) 48 49 mm² (7 mm × 7 mm)
  • Triple Half-Bridge Gate Driver
    • Drives 3 High-Side and 3 Low-Side N-Channel MOSFETs (NMOS)
  • Smart Gate Drive Architecture
    • Adjustable Slew Rate Control
    • 10-mA to 1-A Peak Source Current
    • 20-mA to 2-A Peak Sink Current
  • Integrated Gate Driver Power Supplies
    • Supports 100% PWM Duty Cycle
    • High-Side Charge Pump
    • Low-Side Linear Regulator
  • 6 to 60-V Operating Voltage Range
  • Optional Integrated DC/DC Buck Regulator
    • LMR16006X SIMPLE SWITCHER
    • 4 to 60-V Operating Voltage Range
    • 0.8 to 60-V, 600-mA Output Capability
  • Optional Integrated Triple Low-Side Current Sense Amplifiers (CSAs)
    • Adjustable Gain (5, 10, 20, 40 V/V)
    • Bidirectional or Unidirectional Support
  • SPI and Hardware Interface Available
  • 6x, 3x, 1x, and Independent PWM Modes
  • Supports 1.8-V, 3.3-V, and 5-V Logic Inputs
  • Low-Power Sleep Mode (12 µA)
  • Linear Voltage Regulator, 3.3 V, 30 mA
  • Compact QFN Packages and Footprints
  • Efficient System Design With Power Blocks
  • Integrated Protection Features
    • VM Undervoltage Lockout (UVLO)
    • Charge Pump Undervoltage (CPUV)
    • MOSFET Overcurrent Protection (OCP)
    • Gate Driver Fault (GDF)
    • Thermal Warning and Shutdown (OTW/OTSD)
    • Fault Condition Indicator (nFAULT)
  • Triple Half-Bridge Gate Driver
    • Drives 3 High-Side and 3 Low-Side N-Channel MOSFETs (NMOS)
  • Smart Gate Drive Architecture
    • Adjustable Slew Rate Control
    • 10-mA to 1-A Peak Source Current
    • 20-mA to 2-A Peak Sink Current
  • Integrated Gate Driver Power Supplies
    • Supports 100% PWM Duty Cycle
    • High-Side Charge Pump
    • Low-Side Linear Regulator
  • 6 to 60-V Operating Voltage Range
  • Optional Integrated DC/DC Buck Regulator
    • LMR16006X SIMPLE SWITCHER
    • 4 to 60-V Operating Voltage Range
    • 0.8 to 60-V, 600-mA Output Capability
  • Optional Integrated Triple Low-Side Current Sense Amplifiers (CSAs)
    • Adjustable Gain (5, 10, 20, 40 V/V)
    • Bidirectional or Unidirectional Support
  • SPI and Hardware Interface Available
  • 6x, 3x, 1x, and Independent PWM Modes
  • Supports 1.8-V, 3.3-V, and 5-V Logic Inputs
  • Low-Power Sleep Mode (12 µA)
  • Linear Voltage Regulator, 3.3 V, 30 mA
  • Compact QFN Packages and Footprints
  • Efficient System Design With Power Blocks
  • Integrated Protection Features
    • VM Undervoltage Lockout (UVLO)
    • Charge Pump Undervoltage (CPUV)
    • MOSFET Overcurrent Protection (OCP)
    • Gate Driver Fault (GDF)
    • Thermal Warning and Shutdown (OTW/OTSD)
    • Fault Condition Indicator (nFAULT)

The DRV832x family of devices is an integrated gate driver for three-phase applications. The devices provide three half-bridge gate drivers, each capable of driving high-side and low-side N-channel power MOSFETs. The DRV832x generates the correct gate drive voltages using an integrated charge pump for the high-side MOSFETs and a linear regulator for the low-side MOSFETs. The Smart Gate Drive architecture supports peak gate drive currents up to 1A source and 2A. The DRV832x can operate from a single power supply and supports a wide input supply range of 6 to 60 V for the gate driver and 4 to 60 V for the optional buck regulator.

The 6x, 3x, 1x, and independent input PWM modes allow for simple interfacing to controller circuits. The configuration settings for the gate driver and device are highly configurable through the SPI or hardware (H/W) interface. The DRV8323 and DRV8323R devices integrate three low-side current sense amplifiers that allow bidirectional current sensing on all three phases of the drive stage. The DRV8320R and DRV8323R devices integrate a 600mA DC/DC buck regulator.

A low-power sleep mode is provided to achieve low quiescent current draw by shutting down most of the internal circuitry. Internal protection functions are provided for undervoltage lockout, charge pump fault, MOSFET overcurrent, MOSFET short circuit, gate driver fault, and overtemperature. Fault conditions are indicated on the nFAULT pin with details through the device registers for SPI device variants.

The DRV832x family of devices is an integrated gate driver for three-phase applications. The devices provide three half-bridge gate drivers, each capable of driving high-side and low-side N-channel power MOSFETs. The DRV832x generates the correct gate drive voltages using an integrated charge pump for the high-side MOSFETs and a linear regulator for the low-side MOSFETs. The Smart Gate Drive architecture supports peak gate drive currents up to 1A source and 2A. The DRV832x can operate from a single power supply and supports a wide input supply range of 6 to 60 V for the gate driver and 4 to 60 V for the optional buck regulator.

The 6x, 3x, 1x, and independent input PWM modes allow for simple interfacing to controller circuits. The configuration settings for the gate driver and device are highly configurable through the SPI or hardware (H/W) interface. The DRV8323 and DRV8323R devices integrate three low-side current sense amplifiers that allow bidirectional current sensing on all three phases of the drive stage. The DRV8320R and DRV8323R devices integrate a 600mA DC/DC buck regulator.

A low-power sleep mode is provided to achieve low quiescent current draw by shutting down most of the internal circuitry. Internal protection functions are provided for undervoltage lockout, charge pump fault, MOSFET overcurrent, MOSFET short circuit, gate driver fault, and overtemperature. Fault conditions are indicated on the nFAULT pin with details through the device registers for SPI device variants.

下載 觀看有字幕稿的影片 影片

您可能會感興趣的類似產品

open-in-new 比較替代產品
功能相同,但針腳輸出與所比較的裝置不同。
DRV8353R 現行 具降壓穩壓器和電流分流放大器的 102-V 最大 3 相智慧型閘極驅動器 Features absolute maximum rating of 102V
功能相似於所比較的產品。
DRV8323 現行 具電流分流放大器的 65-V 最大 3 相智慧型閘極驅動器 No integrated buck regulator

技術文件

找不到結果。請清除您的搜尋條件,然後再試一次。
檢視所有 19
重要文件 類型 標題 格式選項 下載最新的英文版本 日期
* 資料表 DRV832x 6 to 60-V Three-Phase Smart Gate Driver datasheet (Rev. D) 2022/3/17
Application brief Brushless-DC Made Simple – Sensored Motor Control (Rev. C) PDF | HTML 2026/3/11
應用說明 Best Practices for Board Layout of Motor Drivers (Rev. B) PDF | HTML 2021/10/14
應用說明 Hardware Design Considerations for an Electric Bicycle using BLDC Motor (Rev. B) 2021/6/23
應用說明 System Design Considerations for High-Power Motor Driver Applications PDF | HTML 2021/6/22
Application brief MSP430 and DRV83xx Selection Guide for Power Tools (Rev. A) PDF | HTML 2021/6/14
應用說明 Understanding Smart Gate Drive (Rev. D) 2021/3/1
應用說明 Hardware Design Considerations for an Efficient Vacuum Cleaner Using a BLDC Moto (Rev. B) PDF | HTML 2019/3/6
Application brief Low Voltage Motor Drive Operation With Smart Gate Drive 2018/12/20
Application brief Field Oriented Control Made Easy for Brushless DC Motors Using Smart Gate Drive (Rev. B) 2018/8/22
應用說明 Architecture for Brushless-DC Gate Drive Systems (Rev. A) 2018/8/22
應用說明 Cut-Off Switch in High-Current Motor-Drive Applications (Rev. A) 2018/8/20
使用指南 BOOSTXL-DRV8323Rx EVM User’s Guide (Rev. C) 2018/3/27
應用說明 Layout Guide for the DRV832x Family of Three-Phase Smart Gate Drivers 2018/3/1
技術文章 Six weird ways to design with a brushless-DC driver PDF | HTML 2017/8/28
技術文章 Demand for higher power density drives innovative power tool solution PDF | HTML 2017/5/23
使用指南 BOOSTXL-DRV832X EVM GUI User’s Guide 2017/2/8
應用說明 AN-1149 Layout Guidelines for Switching Power Supplies (Rev. C) 2013/4/23
應用說明 Sensored 3-Phase BLDC Motor Control Using MSP430 2011/7/20

設計與開發

如需其他條款或必要資源,請按一下下方的任何標題以檢視詳細頁面 (如有)。

開發板

BOOSTXL-DRV8323RH — 具有降壓、分流放大器的 DRV8323RH 三相智慧型閘極驅動器 (硬體介面) 評估模組

BOOSTXL-DRV8323RH 是一款 15A、三相無刷 DC 驅動級,採用 DRV8323RH 閘極驅動器與 CSD88599Q5DC NexFETTM 電源塊。  此模組具備獨立 DC 匯流排和相位電壓感測,以及獨立低壓側電流分流放大器,因此此 EVM 最適合用於無感測器 BLDC 演算法。  模組透過整合式 0.6A 降壓穩壓器供應 MCU 3.3V 電源。  驅動級具有短路、過熱、擊穿和低電壓保護,並可透過不同的硬體配置接腳輕鬆配置。
使用指南: PDF
支援產品和硬體
有庫存
限制:
??asset.out-of-stock-ti_zh_TW??
無法提供
開發板

BOOSTXL-DRV8323RS — 具有降壓、分流放大器的 DRV8323RS 三相智慧型閘極驅動器(SPI 介面)評估模組

BOOSTXL-DRV8323RS 是一款 15A、三相無刷 DC 驅動級,採用 DRV8323RH 閘極驅動器與 CSD88599Q5DC NexFETTM 電源塊。此模組具備獨立 DC 匯流排和相位電壓感測,以及獨立低壓側電流分流放大器,因此此評估模組最適合用於無感測器 BLDC 演算法。模組透過整合式 0.6A 降壓穩壓器供應 MCU 3.3V 電源。驅動級具備短路、過熱、擊穿和欠電壓保護,可透過裝置 SPI 暫存器輕鬆配置。

MathWorks MATLAB & Simulink 範例型號包括以下內容:

 

使用指南: PDF
支援產品和硬體
有庫存
限制:
??asset.out-of-stock-ti_zh_TW??
無法提供
快速入門

MSP-MOTOR-CONTROL — MSPM0 Firmware solutions for motor control applications

MSP 馬達控制為一系列軟體、工具和範例,可在 30 分鐘或更短時間內運用 MSPM0 Arm® Cortex® M0+ MCU 和熱門馬達驅動器解決方案來運轉馬達。

MSP 馬達控制提供可轉動有刷、步進與三相馬達的受支援硬體套件範例,具備最佳性能、整合性與易用性的感測和無感測器控制演算法。透過訂購硬體、連接馬達及使用我們的圖形使用者介面或線上程式碼範例,可隨時運轉您的馬達。

支援產品和硬體
計算工具

BLDC-MAX-QG-MOSFET-CALCULATOR — Calculate the maximum QG MOSFET for your motor driver

Calculate the maximum QG MOSFET that can be driven based on the PWM switching frequency, algorithm type, and additional external capacitance.
支援產品和硬體
參考設計

TIDA-010072 — 適合呼吸應用的鼓風機與閥門控制參考設計

此參考設計提供可支援高達 ±200 kRPM/s 馬達加速與減速的精巧系統設計,這是許多呼吸器應用的主要需求。此設計支援包括 TMS320F28027F 在內的許多板外 C2000 控制器,實現低成本、無感測器磁場定向控制 (FOC)。此外,此設計支援廣泛輸入電壓範圍 (6-28 V),可同時支援穩壓線路和電池電源。為驅動鼓風機和閥門,此設計分別使用 DRV8323RS 智慧型閘極驅動器和 DRV8847 馬達驅動器。
支援產品和硬體
參考設計

TIDA-01485 — 效率為 99% 且適用於三相 BLDC 馬達的 36V、1kW、18cm2 功率級參考設計

此 1kW 功率級參考設計針對以 10 節串聯的鋰離子電池驅動的三相 36V 無刷 DC (BLDC) 馬達之工業應用(例如電動工具),可達到 99% 效率。此設計展示該功率位準下最小的逆變器功率級,採用基於感測器的梯形控制,並支援 25ARMS 連續(60A 峰值持續 2 秒,100A 峰值持續 400 毫秒)繞組電流。此設計的 MOSFET 電源塊與電流控制閘極驅動器透過電壓轉換速率控制與低寄生電感,有助於實現非接觸式 MOSFET 切換並降低 EMI。
支援產品和硬體
封裝 針腳 CAD 符號、佔位空間與 3D 模型
VQFN (RGZ) 48 Ultra Librarian

訂購與品質

支援與培訓

內含 TI 工程師技術支援的 TI E2E™ 論壇

內容係由 TI 和社群貢獻者依「現狀」提供,且不構成 TI 規範。檢視使用條款

若有關於品質、封裝或訂購 TI 產品的問題,請參閱 TI 支援。​​​​​​​​​​​​​​

影片