產品詳細資料

Number of full bridges 2 Vs (min) (V) 6.5 Vs ABS (max) (V) 50 Full-scale current (A) 2 Peak output current (A) 2.5 RDS(ON) (HS + LS) (mΩ) 630 Sleep current (µA) 28 Control mode STEP/DIR Control interface Hardware (GPIO) Microstepping levels 16 Features Current Regulation, Smart Tune Rating Catalog Operating temperature range (°C) -40 to 125
Number of full bridges 2 Vs (min) (V) 6.5 Vs ABS (max) (V) 50 Full-scale current (A) 2 Peak output current (A) 2.5 RDS(ON) (HS + LS) (mΩ) 630 Sleep current (µA) 28 Control mode STEP/DIR Control interface Hardware (GPIO) Microstepping levels 16 Features Current Regulation, Smart Tune Rating Catalog Operating temperature range (°C) -40 to 125
HTSSOP (PWP) 28 62.08 mm² 9.7 x 6.4 WQFN (RHR) 28 19.25 mm² 5.5 x 3.5
  • Microstepping Stepper Motor Driver
    • STEP/DIR Interface
    • Up to 1/16 Microstepping Indexer
    • Non-Circular and Standard ½ Step Modes
  • 6.5- to 45-V Operating Supply Voltage Range
  • Multiple Decay Modes to Support Any Motor
    • Smart tune
    • Mixed Decay
    • Slow Decay
    • Fast Decay
  • Adaptive Blanking Time for Smooth Stepping
  • Configurable Off-Time PWM Chopping
    • 10-, 20-, or 30-µs Off-Time
  • 3.3-V, 10-mA LDO Regulator
  • Low-Current Sleep Mode (28 µA)
  • Small Package and Footprint
    • 28 HTSSOP (PowerPAD™)
    • 28 WQFN

  • Protection Features
    • VM Undervoltage Lockout (UVLO2)
    • Logic Undervoltage (UVLO1)
    • Charge Pump Undervoltage (CPUV)
    • Overcurrent Protection (OCP)
      • Latched OCP Mode
      • Retry OCP Mode
    • Thermal Shutdown (TSD)
    • Fault Condition Indication Pin (nFAULT)
  • Microstepping Stepper Motor Driver
    • STEP/DIR Interface
    • Up to 1/16 Microstepping Indexer
    • Non-Circular and Standard ½ Step Modes
  • 6.5- to 45-V Operating Supply Voltage Range
  • Multiple Decay Modes to Support Any Motor
    • Smart tune
    • Mixed Decay
    • Slow Decay
    • Fast Decay
  • Adaptive Blanking Time for Smooth Stepping
  • Configurable Off-Time PWM Chopping
    • 10-, 20-, or 30-µs Off-Time
  • 3.3-V, 10-mA LDO Regulator
  • Low-Current Sleep Mode (28 µA)
  • Small Package and Footprint
    • 28 HTSSOP (PowerPAD™)
    • 28 WQFN

  • Protection Features
    • VM Undervoltage Lockout (UVLO2)
    • Logic Undervoltage (UVLO1)
    • Charge Pump Undervoltage (CPUV)
    • Overcurrent Protection (OCP)
      • Latched OCP Mode
      • Retry OCP Mode
    • Thermal Shutdown (TSD)
    • Fault Condition Indication Pin (nFAULT)

The DRV8880 is a bipolar stepper motor driver for industrial applications. The device has two N-channel power MOSFET H-bridge drivers and a microstepping indexer. The DRV8880 is capable of driving 2.0 A full-scale current or 1.4-A rms current (with proper PCB ground plane for thermal dissipation and at 24 V and TA = 25°C).

Smart tune automatically tunes stepper motors for optimal current regulation performance and compensates for motor variation and aging effects. Additionally slow, fast, and mixed decay modes are available.

The STEP/DIR pins provide a simple control interface. The device can be configured in full-step up to 1/16- step modes. A low-power sleep mode is provided for very low quiescent current standby using a dedicated nSLEEP pin.

Internal protection functions are provided for undervoltage, charge pump faults, overcurrent, short-circuits, and overtemperature. Fault conditions are indicated by a nFAULT pin.

The DRV8880 is a bipolar stepper motor driver for industrial applications. The device has two N-channel power MOSFET H-bridge drivers and a microstepping indexer. The DRV8880 is capable of driving 2.0 A full-scale current or 1.4-A rms current (with proper PCB ground plane for thermal dissipation and at 24 V and TA = 25°C).

Smart tune automatically tunes stepper motors for optimal current regulation performance and compensates for motor variation and aging effects. Additionally slow, fast, and mixed decay modes are available.

The STEP/DIR pins provide a simple control interface. The device can be configured in full-step up to 1/16- step modes. A low-power sleep mode is provided for very low quiescent current standby using a dedicated nSLEEP pin.

Internal protection functions are provided for undervoltage, charge pump faults, overcurrent, short-circuits, and overtemperature. Fault conditions are indicated by a nFAULT pin.

下載 觀看有字幕稿的影片 影片

您可能會感興趣的類似產品

open-in-new 比較替代產品
功能相同,但引腳輸出與所比較的產品不同
DRV8434E 現行 具有整合式電流感測的 48-V、2.5-A 雙極步進或雙刷馬達驅動器 Higher current capabilities
DRV8436 現行 具有整合式電流感測與 1/256 微型步進的 48V、1.5A 雙極步進馬達驅動器 Wider voltage support
功能相似於所比較的產品
DRV8425E 現行 具有整合式電流感測功能的 35V、2A 雙極步進或雙刷馬達驅動器 35V, 2A bipolar stepper or dual brushed motor driver with integrated current sensing
DRV8886AT 現行 具有整合式電流感測和智慧調整技術的 37-V、2-A 雙極步進馬達驅動器 The DRV8886AT includes Integrated Current Sensing and adaptive decay mode

技術文件

star =TI 所選的此產品重要文件
找不到結果。請清除您的搜尋條件,然後再試一次。
檢視所有 9
類型 標題 日期
* Data sheet DRV8880 2-A Stepper Motor Driver With Smart Tune datasheet (Rev. C) PDF | HTML 2017年 8月 24日
Application note Best Practices for Board Layout of Motor Drivers (Rev. B) PDF | HTML 2021年 10月 14日
Application note Methods to Configure Current Regulation for Brushed and Stepper Motors (Rev. B) PDF | HTML 2021年 1月 19日
White paper How smart tune regulates current in stepper motors (Rev. A) 2019年 3月 19日
Application brief Smart Tuning for Efficient Stepper Driving 2018年 11月 20日
Technical article Getting smart about tuning your stepper motor PDF | HTML 2018年 8月 23日
Application note PowerPAD™ Thermally Enhanced Package (Rev. H) 2018年 7月 6日
Technical article Spin your stepper automatically PDF | HTML 2016年 3月 3日
Application brief PowerPAD™ Made Easy (Rev. B) 2004年 5月 12日

設計與開發

如需其他條款或必要資源,請按一下下方的任何標題以檢視詳細頁面 (如有)。

開發板

DRV8880EVM — DRV8880 雙 H 橋步進馬達驅動器評估模組

This dual H-bridge driver with integrated FETs, DRV8880 can drive stepper motor drivers up to 1/16 microstepping with an on-chip indexer. Aimed at 24V motors, this device features AutoTune(TM) adaptive decay mode, which automatically adjusts the decay settings during operation to achieve the (...)

使用指南: PDF
TI.com 無法提供
參考設計

TIDA-00830 — 具有自動調整功能的 24V 步進馬達設計參考設計

TIDA-00830 is an application overview of TI’s automatic stepper motor tuning feature known as AutoTune™.  This design showcases how quickly AutoTune can adapt to changes in system inputs or motor characteristics without the user having to apply any type of parameter tuning.  (...)
Test report: PDF
電路圖: PDF
參考設計

TIDA-01370 — 帶有用於失速偵測的編碼器的閉合迴路步進馬達參考設計

This reference design is used for the stall-detection in a stepper motor driven by DRV8880 in the presence of a closed-loop feedback obtained with an optical rotary incremental encoder.  The reference design shows how to detect a stall using a closed-loop algorithm.
Design guide: PDF
電路圖: PDF
封裝 針腳 CAD 符號、佔位空間與 3D 模型
HTSSOP (PWP) 28 Ultra Librarian
WQFN (RHR) 28 Ultra Librarian

訂購與品質

內含資訊:
  • RoHS
  • REACH
  • 產品標記
  • 鉛塗層/球物料
  • MSL 等級/回焊峰值
  • MTBF/FIT 估算值
  • 材料內容
  • 認證摘要
  • 進行中持續性的可靠性監測
內含資訊:
  • 晶圓廠位置
  • 組裝地點

建議產品可能具有與此 TI 產品相關的參數、評估模組或參考設計。

支援與培訓

內含 TI 工程師技術支援的 TI E2E™ 論壇

內容係由 TI 和社群貢獻者依「現狀」提供,且不構成 TI 規範。檢視使用條款

若有關於品質、封裝或訂購 TI 產品的問題,請參閱 TI 支援。​​​​​​​​​​​​​​

影片