首頁 放大器 電流感測放大器 數位電源監測器
首頁
放大器
電流感測放大器
數位電源監測器

INA220

現行

26V、12 位元 i2c 輸出電流/電壓/電源監控

立即訂購
產品規格表

INA220

現行
產品規格表 立即訂購

產品詳細資料

Common-mode voltage (max) (V) 26 Common-mode voltage (min) (V) 0 Digital interface I2C, SMBus Resolution (Bits) 12 Input offset (±) (max) (µV) 50, 100 Input offset drift (±) (max) (µV/°C) 0.5 Input offset drift (±) (typ) (µV/°C) 0.16 Voltage gain (V/V) 0.125, 0.25, 0.5, 1 CMRR (min) (dB) 120 Supply voltage (max) (V) 5.5 Supply voltage (min) (V) 3 Iq (max) (mA) 1 Gain error (%) 0.3, 0.5 Gain error drift (±) (max) (ppm/°C) 83, 167 Features Bidirectional, Intergrated Power Monitor, Low-side Capable, Programmable Gain Number of channels 1 Power measurement accuracy (%) 0.8, 1 Rating Catalog Operating temperature range (°C) -40 to 125
Common-mode voltage (max) (V) 26 Common-mode voltage (min) (V) 0 Digital interface I2C, SMBus Resolution (Bits) 12 Input offset (±) (max) (µV) 50, 100 Input offset drift (±) (max) (µV/°C) 0.5 Input offset drift (±) (typ) (µV/°C) 0.16 Voltage gain (V/V) 0.125, 0.25, 0.5, 1 CMRR (min) (dB) 120 Supply voltage (max) (V) 5.5 Supply voltage (min) (V) 3 Iq (max) (mA) 1 Gain error (%) 0.3, 0.5 Gain error drift (±) (max) (ppm/°C) 83, 167 Features Bidirectional, Intergrated Power Monitor, Low-side Capable, Programmable Gain Number of channels 1 Power measurement accuracy (%) 0.8, 1 Rating Catalog Operating temperature range (°C) -40 to 125
VSSOP (DGS) 10 14.7 mm² 3 x 4.9
  • High- or Low-Side Sensing
  • Senses Bus Voltages from 0 V to 26 V
  • Reports Current, Voltage, and Power
  • 16 Programmable Addresses
  • High Accuracy: 0.5% (Maximum) Over
    Temperature (INA220B)
  • User-Programmable Calibration
  • Fast (2.56-MHz) I2C- or SMBUS-Compatible
    Interface
  • VSSOP-10 Package
  • APPLICATIONS
    • Servers
    • Telecom Equipment
    • Notebook Computers
    • Power Management
    • Battery Chargers
    • Automotive
    • Power Supplies
    • Test Equipment

All other trademarks are the property of their respective owners
  • High- or Low-Side Sensing
  • Senses Bus Voltages from 0 V to 26 V
  • Reports Current, Voltage, and Power
  • 16 Programmable Addresses
  • High Accuracy: 0.5% (Maximum) Over
    Temperature (INA220B)
  • User-Programmable Calibration
  • Fast (2.56-MHz) I2C- or SMBUS-Compatible
    Interface
  • VSSOP-10 Package
  • APPLICATIONS
    • Servers
    • Telecom Equipment
    • Notebook Computers
    • Power Management
    • Battery Chargers
    • Automotive
    • Power Supplies
    • Test Equipment

All other trademarks are the property of their respective owners

The INA220 is a current shunt and power monitor with an I2C- or SMBUS-compatible interface. The INA220 monitors both shunt drop and supply voltage. A programmable calibration value, combined with an internal multiplier, enables direct readouts in amperes. An additional multiplying register calculates power in watts. The I2C- or SMBUS-compatible interface features 16 programmable addresses. The separate shunt input on the INA220 allows it to be used in systems with low-side sensing.

The INA220 is available in two grades: A and B. The B grade version has higher accuracy and higher precision specifications.

The INA220 senses across shunts on buses that can vary from 0 to 26 V, useful for low-side sensing or CPU power supplies. The device uses a single 3- to 5.5-V supply, drawing a maximum of 1 mA of supply current. The INA220 operates from –40°C to 125°C.

The INA220 is a current shunt and power monitor with an I2C- or SMBUS-compatible interface. The INA220 monitors both shunt drop and supply voltage. A programmable calibration value, combined with an internal multiplier, enables direct readouts in amperes. An additional multiplying register calculates power in watts. The I2C- or SMBUS-compatible interface features 16 programmable addresses. The separate shunt input on the INA220 allows it to be used in systems with low-side sensing.

The INA220 is available in two grades: A and B. The B grade version has higher accuracy and higher precision specifications.

The INA220 senses across shunts on buses that can vary from 0 to 26 V, useful for low-side sensing or CPU power supplies. The device uses a single 3- to 5.5-V supply, drawing a maximum of 1 mA of supply current. The INA220 operates from –40°C to 125°C.
filter 尋找其它 數位電源監測器
下載 觀看有字幕稿的影片 影片

技術文件

star =TI 所選的此產品重要文件
找不到結果。請清除您的搜尋條件，然後再試一次。
檢視所有 12
重要文件 類型 標題 格式選項 日期
* Data sheet INA220 High- or Low-Side, Bidirectional Current and Power Monitor With Two-Wire Interface datasheet (Rev. E) PDF | HTML 2016年 1月 12日
Application note Risks and Prevention of ESD, EOS, and Latch Up Events for Current Sense Amplifiers PDF | HTML 2024年 11月 18日
E-book An Engineer's Guide to Current Sensing (Rev. B) 2022年 4月 12日
Application note Using a PCB Copper Trace as a Current-Sense Shunt Resistor PDF | HTML 2022年 1月 25日
Application note Digital Interfaces for Current Sensing Devices (Rev. A) PDF | HTML 2021年 9月 30日
Application brief Integrating the Current Sensing Signal Path (Rev. B) PDF | HTML 2021年 9月 29日
Application brief Integrated, Current Sensing Analog-to-Digital Converter (Rev. A) PDF | HTML 2021年 9月 28日
Application note Getting Started with Digital Power Monitors (Rev. A) PDF | HTML 2021年 9月 2日
Design guide –48-V Telecom Current, Voltage, and Power Sense With Isolation Reference Design (Rev. A) 2017年 9月 28日
Application brief Energy and Power Monitoring with Digital Current Sensors 2017年 5月 25日
Application note Understanding the I2C Bus PDF | HTML 2015年 6月 30日
More literature INA220EVM (Quick-Start Guide Video) 2009年 8月 14日

設計與開發

如需其他條款或必要資源，請按一下下方的任何標題以檢視詳細頁面 (如有)。

開發板

INA220EVM — 適用 26-V、12 位元、I²C 輸出數位電源監控器的 INA220 評估模組

INA220 評估模組 (EVM) 是可評估 INA220 主要功能與性能的平台。EVM 支援高達 10-A 的電流量測，並隨附圖形使用者介面 (GUI) 支援，可讀取及寫入裝置暫存器。

使用指南: PDF | HTML
TI.com 無法提供
程式碼範例或展示

SBOC298 — INA220EVM Rev A Source Code

支援產品和硬體

支援產品和硬體
下載
開發模組 (EVM) 的 GUI

SBOC297 — INA220EVM Rev A Software

支援產品和硬體

支援產品和硬體
下載
模擬型號

INA220 IBIS Model (Rev. A)

SBOM419A.ZIP (38 KB) - IBIS Model
下載
計算工具

ANALOG-ENGINEER-CALC — PC software analog engineer's calculator

The analog engineer’s calculator is designed to speed up many of the repetitive calculations that analog circuit design engineers use on a regular basis. This PC-based tool provides a graphical interface with a list of various common calculations ranging from setting operational-amplifier (...)

支援產品和硬體

支援產品和硬體
啟動 下載
計算工具

CS-AMPLIFIER-ERROR-TOOL — Current Sense Amplifier Comparison and Error Tool

This Excel calculator provides a comparison between two and five of our standard current sense amplifiers, delivering a chart containing the basic parameters of each device. This calculator also takes system condition inputs from users such as common-mode voltage, supply voltage, shunt resistor (...)
支援產品和硬體

支援產品和硬體
下載
計算工具

SBOR021 — Power Monitor Tool

Power Monitor Tool
支援產品和硬體

支援產品和硬體
下載
配置圖

INA220EVM Schematic

SBOR007.ZIP (47 KB)
下載
模擬工具

PSPICE-FOR-TI — PSpice® for TI 設計與模擬工具

PSpice® for TI 是有助於評估類比電路功能的設計和模擬環境。這款全功能設計和模擬套件使用 Cadence® 的類比分析引擎。PSpice for TI 包括業界最大的模型庫之一，涵蓋我們的類比和電源產品組合，以及特定類比行為模型，且使用無需支付費用。

PSpice for TI 設計和模擬環境可讓您使用其內建函式庫來模擬複雜的混合訊號設計。在進行佈局和製造之前，建立完整的終端設備設計和解決方案原型，進而縮短上市時間並降低開發成本。 

在 PSpice for TI 設計與模擬工具中，您可以搜尋 TI (...)
要求
模擬工具

TINA-TI — 基於 SPICE 的類比模擬程式

TINA-TI provides all the conventional DC, transient and frequency domain analysis of SPICE and much more. TINA has extensive post-processing capability that allows you to format results the way you want them. Virtual instruments allow you to select input waveforms and probe circuit nodes voltages (...)
使用指南: PDF
View Options
封裝 針腳 CAD 符號、佔位空間與 3D 模型
VSSOP (DGS) 10 Ultra Librarian
適用 TI 的評估品項標準條款與條件。

訂購與品質

內含資訊：
  • RoHS
  • REACH
  • 產品標記
  • 鉛塗層/球物料
  • MSL 等級/回焊峰值
  • MTBF/FIT 估算值
  • 材料內容
  • 認證摘要
  • 進行中的可靠性監測
內含資訊：
  • 晶圓廠位置
  • 組裝地點

支援與培訓

內含 TI 工程師技術支援的 TI E2E™ 論壇

以英文檢視所有論壇主題

內容係由 TI 和社群貢獻者依「現狀」提供，且不構成 TI 規範。檢視使用條款。

若有關於品質、封裝或訂購 TI 產品的問題，請參閱 TI 支援。​​​​​​​​​​​​​​

影片