首頁 放大器 儀器放大器
首頁
放大器
儀器放大器

INA819

現行

具有 ±60V 過電壓保護 (增益針腳 2、3) 的低功耗 (350µA)，精密儀器放大器

立即訂購
產品規格表

INA819

現行
產品規格表 立即訂購

產品詳細資料

Number of channels 1 Vs (max) (V) 36 Vs (min) (V) 4.5 Input offset (±) (max) (µV) 35 Voltage gain (min) (V/V) 1 Voltage gain (max) (V/V) 10000 Noise at 1 kHz (typ) (nV√Hz) 8 Features Overvoltage protection, Small Size, Super-beta CMRR (min) (dB) 110 Input offset drift (±) (max) (µV/°C) 0.4 Input bias current (±) (max) (nA) 0.5 Iq (typ) (mA) 0.35 Bandwidth at min gain (typ) (MHz) 2 Gain error (±) (max) (%) 0.15 Operating temperature range (°C) -40 to 125 Rating Catalog Type Resistor Gain nonlinearity (±) (max) (%) 0.0015 Output swing headroom (to negative supply) (typ) (V) 0.15 Output swing headroom (to positive supply) (typ) (V) -0.15 Input common mode headroom (to negative supply) (typ) (V) 2 Input common mode headroom (to positive supply) (typ) (V) -2 Noise at 0.1 Hz to 10 Hz (typ) (µVPP) 0.19
Number of channels 1 Vs (max) (V) 36 Vs (min) (V) 4.5 Input offset (±) (max) (µV) 35 Voltage gain (min) (V/V) 1 Voltage gain (max) (V/V) 10000 Noise at 1 kHz (typ) (nV√Hz) 8 Features Overvoltage protection, Small Size, Super-beta CMRR (min) (dB) 110 Input offset drift (±) (max) (µV/°C) 0.4 Input bias current (±) (max) (nA) 0.5 Iq (typ) (mA) 0.35 Bandwidth at min gain (typ) (MHz) 2 Gain error (±) (max) (%) 0.15 Operating temperature range (°C) -40 to 125 Rating Catalog Type Resistor Gain nonlinearity (±) (max) (%) 0.0015 Output swing headroom (to negative supply) (typ) (V) 0.15 Output swing headroom (to positive supply) (typ) (V) -0.15 Input common mode headroom (to negative supply) (typ) (V) 2 Input common mode headroom (to positive supply) (typ) (V) -2 Noise at 0.1 Hz to 10 Hz (typ) (µVPP) 0.19
SOIC (D) 8 29.4 mm² 4.9 x 6 VSSOP (DGK) 8 14.7 mm² 3 x 4.9 WSON (DRG) 8 9 mm² 3 x 3
  • Low offset voltage: 10 µV (typ), 35 µV (max)
  • Gain drift: 5 ppm/°C (G = 1), 35 ppm/°C (G > 1) (max)
  • Noise: 8 nV/√ Hz
  • Bandwidth: 2 MHz (G = 1), 270 kHz (G = 100)
  • Stable with 1-nF capacitive loads
  • Inputs protected up to ±60 V
  • Common-mode rejection: 110 dB, G = 10 (min)
  • Power supply rejection: 110 dB, G = 1 (min)
  • Supply current: 385 µA (max)
  • Supply range:
    • Single supply: 4.5 V to 36 V
    • Dual supply: ±2.25 V to ±18 V
  • Specified temperature range: –40°C to +125°C
  • Packages: 8-pin SOIC, VSSOP, WSON
  • Low offset voltage: 10 µV (typ), 35 µV (max)
  • Gain drift: 5 ppm/°C (G = 1), 35 ppm/°C (G > 1) (max)
  • Noise: 8 nV/√ Hz
  • Bandwidth: 2 MHz (G = 1), 270 kHz (G = 100)
  • Stable with 1-nF capacitive loads
  • Inputs protected up to ±60 V
  • Common-mode rejection: 110 dB, G = 10 (min)
  • Power supply rejection: 110 dB, G = 1 (min)
  • Supply current: 385 µA (max)
  • Supply range:
    • Single supply: 4.5 V to 36 V
    • Dual supply: ±2.25 V to ±18 V
  • Specified temperature range: –40°C to +125°C
  • Packages: 8-pin SOIC, VSSOP, WSON

The INA819 is a high-precision instrumentation amplifier that offers low power consumption and operates over a very wide single-supply or dual-supply range. A single external resistor sets any gain from 1 to 10,000. The device offers high precision as a result of super-beta input transistors, which provide exceptionally low input offset voltage, offset voltage drift, input bias current, input voltage, and current noise. Additional circuitry protects the inputs against overvoltage up to ±60 V.

The INA819 is optimized to provide a high common-mode rejection ratio. At G = 1, the common-mode rejection ratio exceeds 90 dB across the full input common-mode range. The device is designed for low-voltage operation from a 4.5-V single supply, as well as dual supplies up to ±18 V.

The INA819 is available in 8-pin SOIC, VSSOP, and WSON packages, and is specified over the –40°C to +125°C temperature range.

The INA819 is a high-precision instrumentation amplifier that offers low power consumption and operates over a very wide single-supply or dual-supply range. A single external resistor sets any gain from 1 to 10,000. The device offers high precision as a result of super-beta input transistors, which provide exceptionally low input offset voltage, offset voltage drift, input bias current, input voltage, and current noise. Additional circuitry protects the inputs against overvoltage up to ±60 V.

The INA819 is optimized to provide a high common-mode rejection ratio. At G = 1, the common-mode rejection ratio exceeds 90 dB across the full input common-mode range. The device is designed for low-voltage operation from a 4.5-V single supply, as well as dual supplies up to ±18 V.

The INA819 is available in 8-pin SOIC, VSSOP, and WSON packages, and is specified over the –40°C to +125°C temperature range.
filter 尋找其它 儀器放大器
下載 觀看有字幕稿的影片 影片

技術文件

star =TI 所選的此產品重要文件
找不到結果。請清除您的搜尋條件，然後再試一次。
檢視所有 12
重要文件 類型 標題 格式選項 日期
* Data sheet INA819 35-μV Offset, 8-nV/√Hz Noise, Low-Power, Precision Instrumentation Amplifier datasheet (Rev. D) PDF | HTML 2022年 4月 7日
Application brief How to Select Amplifiers for Pressure Transmitter Applications (Rev. B) PDF | HTML 2023年 2月 14日
Application brief Simplify Voltage and Current Measurement in Battery Test Equipment (Rev. A) PDF | HTML 2022年 3月 10日
Application note Amplifier Input Common-Mode and Output-Swing Limitations PDF | HTML 2022年 1月 14日
Application note Importance of Input Bias Current Return Paths in Instrumentation Amplifier Apps PDF | HTML 2021年 7月 27日
Application brief Difference Between an Instrumentation Amplifier and a Current Sense Amplifier 2020年 4月 3日
User guide Universal Instrumentation Amplifier EVM: Alternate Pinout User's Guide 2020年 2月 7日
Analog Design Journal Precision signal conditioning for safety-enabled AIMs in factory automation 2019年 9月 30日
Technical article What is an instrumentation amplifier? PDF | HTML 2019年 8月 9日
Analog Design Journal Precision signal-conditioning solutions for motor control with position feedback 2019年 6月 14日
Application brief Comprehensive Error Calculation for Instrumentation Amplifiers 2019年 3月 26日
Analog Design Journal Getting the most out of your instrumentation amplifier design 2005年 10月 10日

設計與開發

如需其他條款或必要資源，請按一下下方的任何標題以檢視詳細頁面 (如有)。

開發板

INA826EVM — INA826 評估模組

The INA826EVM is intended to provide basic functional evaluation of the INA826.

使用指南: PDF
TI.com 無法提供
開發板

INAEVM-ALT-SO8 — 採用 SO-8 (D) 封裝之具有替代針腳的儀器放大器的評估模組

INAEVM-ALT-SO8 是具有替代針腳配置的儀器放大器評估模組 (EVM)，可用於簡化 SO-8 (D) 封裝的精密儀器放大器原型設計，針腳配置如使用指南所示。EVM 為未組裝的空板，因此儀器放大器裝置樣品需單獨訂購。

使用指南: PDF
TI.com 無法提供
模擬型號

INA819 PSpice Model (Rev. B)

SBOMAW2B.ZIP (28 KB) - PSpice Model
下載
模擬型號

INA819 TINA-TI Reference Design (Rev. A)

SBOMAW0A.TSC (411 KB) - TINA-TI Reference Design
下載
模擬型號

INA819 TINA-TI Spice Model (Rev. A)

SBOMAW1A.ZIP (14 KB) - TINA-TI Spice Model
下載
計算工具

ANALOG-ENGINEER-CALC — PC software analog engineer's calculator

The analog engineer’s calculator is designed to speed up many of the repetitive calculations that analog circuit design engineers use on a regular basis. This PC-based tool provides a graphical interface with a list of various common calculations ranging from setting operational-amplifier (...)

支援產品和硬體

支援產品和硬體
啟動 下載
模擬工具

PSPICE-FOR-TI — PSpice® for TI 設計與模擬工具

PSpice® for TI 是有助於評估類比電路功能的設計和模擬環境。這款全功能設計和模擬套件使用 Cadence® 的類比分析引擎。PSpice for TI 包括業界最大的模型庫之一，涵蓋我們的類比和電源產品組合，以及特定類比行為模型，且使用無需支付費用。

PSpice for TI 設計和模擬環境可讓您使用其內建函式庫來模擬複雜的混合訊號設計。在進行佈局和製造之前，建立完整的終端設備設計和解決方案原型，進而縮短上市時間並降低開發成本。 

在 PSpice for TI 設計與模擬工具中，您可以搜尋 TI (...)
要求
模擬工具

TINA-TI — 基於 SPICE 的類比模擬程式

TINA-TI provides all the conventional DC, transient and frequency domain analysis of SPICE and much more. TINA has extensive post-processing capability that allows you to format results the way you want them. Virtual instruments allow you to select input waveforms and probe circuit nodes voltages (...)
使用指南: PDF
View Options
封裝 針腳 CAD 符號、佔位空間與 3D 模型
SOIC (D) 8 Ultra Librarian
VSSOP (DGK) 8 Ultra Librarian
WSON (DRG) 8 Ultra Librarian
適用 TI 的評估品項標準條款與條件。

訂購與品質

內含資訊：
  • RoHS
  • REACH
  • 產品標記
  • 鉛塗層/球物料
  • MSL 等級/回焊峰值
  • MTBF/FIT 估算值
  • 材料內容
  • 認證摘要
  • 進行中的可靠性監測
內含資訊：
  • 晶圓廠位置
  • 組裝地點

支援與培訓

內含 TI 工程師技術支援的 TI E2E™ 論壇

以英文檢視所有論壇主題

內容係由 TI 和社群貢獻者依「現狀」提供，且不構成 TI 規範。檢視使用條款。

若有關於品質、封裝或訂購 TI 產品的問題，請參閱 TI 支援。​​​​​​​​​​​​​​

影片