IWR6243
- FMCW transceiver
- Integrated PLL, transmitter, receiver, baseband, and ADC
- 57- to 64-GHz coverage with 7 GHz available bandwidth
- Four receive channels
- Three transmit channels
- Supports 6-bit phase shifter for TX Beam forming
- Ultra-accurate chirp engine based on Fractional-N PLL
- TX power: 12 dBm
- RX noise figure: 10 dB
- Phase noise at 1 MHz:
- –93dBc/Hz
- Built-in
calibration and self-test
- Self-calibrating system across process and temperature
- Host interface
- Control interface with external processor over SPI or I2C interface
- Data interface with external processor over MIPI D-PHY, CSI2 v1.1 and LVDS (only for debug)
- Interrupts for Fault Reporting
-
Functional Safety-Compliant
- Developed for functional safety applications
- Documentation available to aid IEC 61508 functional safety system design up to SIL 3
- Hardware integrity up to SIL-2
- Safety-related certification
- IEC 61508 certified SIL-2 by TUV SUD
- IWR6243 Advanced features
- Embedded self-monitoring with limited Host processor involvement
- Complex baseband architecture
- Option of cascading multiple devices to increase channel count
- Embedded interference detection capability
- Power management
- Built-in LDO Network for enhanced PSRR
- I/Os support dual voltage 3.3 V/1.8 V
- Clock source
- Supports externally driven clock (square/sine) at 40 MHz
- Supports 40 MHz crystal connection with load capacitors
- Easy hardware
design
- 0.65-mm pitch, 161-pin 10.4 mm × 10.4 mm flip chip BGA package for easy assembly and low-cost PCB design
- Small solution size
- Operating Condtions :
- Junction temp range: –40°C to 105°C
The IWR6243 is an integrated single-chip FMCW transceiver capable of operation in the 57- to 64-GHz band. This device enables unprecedented levels of integration in an extremely small form factor. IWR6243 is an ideal solution for low power, self-monitored, ultra-accurate radar systems in the industrial space.
IWR6243 is a self-contained FMCW transceiver single-chip solution that simplifies the implementation of Radar sensors. It is built on TI’s low-power 45-nm RFCMOS process, which enables a monolithic implementation of a 3TX, 4RX system with built-in PLL and ADC converters. Simple programming model changes can enable a wide variety of sensor implementation (Short, Mid, Long) with the possibility of dynamic reconfiguration for implementing a multimode sensor.
Additionally, the device is provided as a complete platform solution including reference hardware design, software drivers, sample configurations, API guide, and user documentation.
更多資訊
造訪 TI 開發人員區以開始進行評估及開發。
技術文件
| 重要文件 | 類型 | 標題 | 格式選項 | 下載最新的英文版本 | 日期 | |
|---|---|---|---|---|---|---|
| * | 資料表 | IWR6243 Single-Chip 57- to 64-GHz FMCW Transceiver datasheet (Rev. A) | PDF | HTML | 2022/11/9 | ||
| * | 勘誤表 | IWR6243 Device Errata Silicon Revision 1.0 | PDF | HTML | 2023/2/21 | ||
| Application brief | 在 NVIDIA Holoscan 平台上實現即時 AI 原始感測器與 IWR6243 mmWave 雷達和攝影機的融合 | PDF | HTML | PDF | HTML | 2026/4/2 | ||
| 功能安全資訊 | IWRxx43 TUV SUD Functional Safety Certificate (Rev. B) | 2024/1/23 | ||||
| 應用說明 | mmWave Radar Radome Design Guide | PDF | HTML | 2021/8/17 |
設計與開發
如需其他條款或必要資源，請按一下下方的任何標題以檢視詳細頁面 (如有)。
HS-3P-77-3D-WGA-LOP-4X4 — HUBER+SUHNER ADAS 雷達感測器的天線設計
77GHz 3D 波導天線 4Tx4R - RF 無需基板解決方案系列
HUBER+SUHNER 開發並製造了第二代 3D 金屬化塑膠波導天線，專為 RF 無需基板解決方案設計。這項以專屬介面實現的尖端技術，支援新一代高密度封裝發射 (LOP) 單體微波積體電路 (MMIC)，以 4TX、4RX 配置通道涵蓋完整的車用 77GHz 雷達頻帶（76GHz 至 81GHz），且具備 125mm2 的小巧連接埠面積。天線設計可大幅縮減 MMIC 封裝尺寸，同時強化傳輸功率、接收器靈敏度，並維持高隔離等級，即使組裝公差偏大也不例外。
CCSTUDIO — Code Composer Studio™ integrated development environment (IDE)
CCStudio™ IDE is part of TI's extensive CCStudio™ development ecosystem and is an integrated development environment for TI's microcontrollers, processors, wireless connectivity devices, and radar sensors. CCStudio IDE is available as desktop or cloud-based applications. The cloud version (...)
RADAR-ACADEMY — mmWave Radar Academy
TI-DEVELOPER-ZONE — Start embedded development on your desktop or in the cloud
MMWAVE-DFP-2G-60GHZ-FW — 適用於第二代 xWR6243 零件的 mmWave 裝置韌體套件 (DFP)。
UNIFLASH — UniFlash for most TI microcontrollers (MCUs) and mmWave sensors
UniFlash 是 TI 龐大 CCStudio™ 開發生態系統的一部分，是一款用於在 TI 微控制器與無線連線裝置上對晶片內快閃記憶體進行燒錄，以及在 TI 處理器上對板載快閃記憶體進行燒錄的軟體工具。UniFlash 提供圖形化介面與命令行介面，並可在桌面上或雲端中執行。
UniFlash 可從 CCStudio™ 開發人員區上的雲端執行，或在下載後於 Windows®、Linux® 和 macOS® 電腦中使用。
請注意，mmWave、AMx、K2G 和 J7 裝置不支援 macOS。AMx、K2G 和 J7 裝置僅於命令列上支援。
RADAR-TOOLBOX — Radar evaluation and development support package with example projects, documentation and tools
| 封裝 | 針腳 | CAD 符號、佔位空間與 3D 模型 |
|---|---|---|
| FCCSP (ABL) | 161 | Ultra Librarian |
訂購與品質
建議產品可能具有與此 TI 產品相關的參數、評估模組或參考設計。