首頁 電源管理 DC/DC 開關穩壓器 DC/DC 轉換器
首頁
電源管理
DC/DC 開關穩壓器
DC/DC 轉換器

LM25575

現行

6V 至 42V、1.5A 降壓 DC/DC 切換穩壓器

立即訂購
產品規格表

LM25575

現行
產品規格表 立即訂購

產品詳細資料

Rating Catalog Topology Buck Iout (max) (A) 1.5 Vin (max) (V) 42 Vin (min) (V) 6 Vout (max) (V) 40 Vout (min) (V) 1.23 Features Frequency synchronization, Overcurrent protection Control mode current mode Operating temperature range (°C) -40 to 125 Iq (typ) (A) 0.001 Duty cycle (max) (%) 95
Rating Catalog Topology Buck Iout (max) (A) 1.5 Vin (max) (V) 42 Vin (min) (V) 6 Vout (max) (V) 40 Vout (min) (V) 1.23 Features Frequency synchronization, Overcurrent protection Control mode current mode Operating temperature range (°C) -40 to 125 Iq (typ) (A) 0.001 Duty cycle (max) (%) 95
HTSSOP (PWP) 16 32 mm² 5 x 6.4
  • Integrated 42V, 330mΩ N-Channel MOSFET
  • Ultra-wide input voltage range From 6V to 42V
  • Adjustable output voltage as low as 1.225V
  • 1.5% feedback reference accuracy
  • Operating frequency adjustable between 50kHz and 1MHz with single resistor
  • Controller or peripheral frequency synchronization
  • Adjustable soft start
  • Emulated current mode control architecture
  • Wide bandwidth error amplifier
  • Built-in protection
  • HTSSOP-16EP (exposed pad)
  • Create a custom design using the LM25575 with the WEBENCH Power Designer
  • Integrated 42V, 330mΩ N-Channel MOSFET
  • Ultra-wide input voltage range From 6V to 42V
  • Adjustable output voltage as low as 1.225V
  • 1.5% feedback reference accuracy
  • Operating frequency adjustable between 50kHz and 1MHz with single resistor
  • Controller or peripheral frequency synchronization
  • Adjustable soft start
  • Emulated current mode control architecture
  • Wide bandwidth error amplifier
  • Built-in protection
  • HTSSOP-16EP (exposed pad)
  • Create a custom design using the LM25575 with the WEBENCH Power Designer

The LM25575 is an easy to use buck regulator which allows design engineers to design and optimize a robust power supply using a minimum set of components. Operating with an input voltage range of 6V to 42V, the LM25575 delivers 1.5A of continuous output current with an integrated 330mΩ N-Channel MOSFET. The regulator uses an emulated current mode architecture which provides inherent line regulation, tight load transient response, and ease of loop compensation without the usual limitation of low-duty cycles associated with current mode regulators. The operating frequency is adjustable from 50kHz to 1MHz to allow optimization of size and efficiency. To reduce EMI, a frequency synchronization pin allows multiple ICs from the LM(2)557x family to self-synchronize or to synchronize to an external clock. The LM25575 makes sure of robustness with cycle-by-cycle current limit, short-circuit protection, thermal shutdown, and remote shutdown. The device is available in a power enhanced HTSSOP-16 package featuring an exposed die attach pad for thermal dissipation. The LM25575 is supported by the full suite of WEBENCH circuit design and selection simulation services online design tools.

The LM25575 is an easy to use buck regulator which allows design engineers to design and optimize a robust power supply using a minimum set of components. Operating with an input voltage range of 6V to 42V, the LM25575 delivers 1.5A of continuous output current with an integrated 330mΩ N-Channel MOSFET. The regulator uses an emulated current mode architecture which provides inherent line regulation, tight load transient response, and ease of loop compensation without the usual limitation of low-duty cycles associated with current mode regulators. The operating frequency is adjustable from 50kHz to 1MHz to allow optimization of size and efficiency. To reduce EMI, a frequency synchronization pin allows multiple ICs from the LM(2)557x family to self-synchronize or to synchronize to an external clock. The LM25575 makes sure of robustness with cycle-by-cycle current limit, short-circuit protection, thermal shutdown, and remote shutdown. The device is available in a power enhanced HTSSOP-16 package featuring an exposed die attach pad for thermal dissipation. The LM25575 is supported by the full suite of WEBENCH circuit design and selection simulation services online design tools.
filter 尋找其它 DC/DC 轉換器
下載 觀看有字幕稿的影片 影片

技術文件

star =TI 所選的此產品重要文件
找不到結果。請清除您的搜尋條件，然後再試一次。
檢視所有 24
重要文件 類型 標題 格式選項 日期
* Data sheet LM25575 42V, 1.5A Step-Down Switching Regulator datasheet (Rev. I) PDF | HTML 2026年 4月 22日
Application note Semiconductor and IC Package Thermal Metrics (Rev. D) PDF | HTML 2024年 3月 25日
White paper Overcoming Challenges in Designing Step-Dwn Reg Apps w/40V Input Voltage (Rev. A) 2018年 7月 3日
Selection guide Power Management Guide 2018 (Rev. R) 2018年 6月 25日
Technical article Quantifying the value of wide VIN PDF | HTML 2016年 6月 15日
Technical article DC/DC converter datasheets – System losses demystified PDF | HTML 2016年 4月 25日
Technical article DC/DC converter datasheets – System efficiency demystified PDF | HTML 2016年 4月 18日
Application note Low EMI Layout Made SIMPLE With LM43600/1/2/3 and LM46000/1/2 (Rev. A) 2014年 9月 12日
Application note AN-1997 Error Amplifier Limitations in High-Performance Regulator Applications (Rev. A) 2013年 5月 6日
Application note AN-2162 Simple Success With Conducted EMI From DC-DC Converters (Rev. C) 2013年 4月 24日
Application note AN-1149 Layout Guidelines for Switching Power Supplies (Rev. C) 2013年 4月 23日
Application note AN-1197 Selecting Inductors for Buck Converters (Rev. B) 2013年 4月 23日
Application note AN-1229 SIMPLE SWITCHER PCB Layout Guidelines (Rev. C) 2013年 4月 23日
Application note AN-1246 Stresses in Wide Input DC-DC Converters (Rev. C) 2013年 4月 23日
Application note AN-1520 A Guide to Board Layout for Best Thermal Resistance for Exposed Packages (Rev. B) 2013年 4月 23日
Application note AN-1566 Techniques for Thermal Analysis of Switching Power Supply Designs (Rev. A) 2013年 4月 23日
Application note AN-1889 How to Measure the Loop Transfer Function of Power Supplies (Rev. A) 2013年 4月 23日
Application note AN-2155 Layout Tips for EMI Reduction in DC/ DC Converters (Rev. A) 2013年 4月 23日
Application note Quick Start Guide for a 1.5 Amp Buck Regulator Using the LM5575 and LM25575 (Rev. B) 2013年 4月 23日
Application note Quick Start Guide for a 3 Amp Buck Regulator Using the LM5576 and LM25576 (Rev. B) 2013年 4月 23日
Application note Understanding and Applying Current-Mode Control Theory 2007年 8月 19日
Application note Input and Output Capacitor Selection 2005年 9月 19日
More literature SEM1600 Topic 4: Constructing Your Power Supply – Layout Considerations 2005年 7月 12日
Application note AN-643 EMI/RFI Board Design (Rev. B) 2004年 5月 3日

設計與開發

如需其他條款或必要資源，請按一下下方的任何標題以檢視詳細頁面 (如有)。

開發板

LM25575EVAL — LM25575 42V 1.5A 降壓穩壓器評估板

The LM25575 evaluation board is designed to provide the design engineer with a fully functional power converter based on Emulated Current Mode Control to evaluate the LM25575 regulator IC. The evaluation board provides a 5V output with a 1.5A current capability. The ultra-wide input voltage ranges (...)

使用指南: PDF
TI.com 無法提供
模擬型號

LM25575 Non-Inverting and Inverting PSpice Transient Model (Rev. A)

SNVM154A.ZIP (124 KB) - PSpice Model
下載
模擬型號

LM25575 Non-Inverting and Inverting Unencrypted PSpice Transient Model (Rev. A)

SNVM870A.ZIP (4 KB) - PSpice Model
下載
模擬型號

LM25575 PSpice Average Model

SNVM153.ZIP (57 KB) - PSpice Model
下載
模擬型號

LM25575 Unencrypted PSpice Average Model

SNVM867.ZIP (2 KB) - PSpice Model
下載
計算工具

LM2557X-557XQUICK-CALC — LM(2)557x 快速入門 SIMPLE SWITCHER 元件計算機

下載
計算工具

SIMPLESWITCHER-COMPONENT-CALC — 可下載的 LM(2)557x 快速入門 SIMPLE SWITCHER 元件計算機

下載
封裝 針腳 CAD 符號、佔位空間與 3D 模型
HTSSOP (PWP) 16 Ultra Librarian
適用 TI 的評估品項標準條款與條件。

訂購與品質

內含資訊：
  • RoHS
  • REACH
  • 產品標記
  • 鉛塗層/球物料
  • MSL 等級/回焊峰值
  • MTBF/FIT 估算值
  • 材料內容
  • 認證摘要
  • 進行中的可靠性監測
內含資訊：
  • 晶圓廠位置
  • 組裝地點

建議產品可能具有與此 TI 產品相關的參數、評估模組或參考設計。

支援與培訓

內含 TI 工程師技術支援的 TI E2E™ 論壇

以英文檢視所有論壇主題

內容係由 TI 和社群貢獻者依「現狀」提供，且不構成 TI 規範。檢視使用條款。

若有關於品質、封裝或訂購 TI 產品的問題，請參閱 TI 支援。​​​​​​​​​​​​​​

影片