LM317

現行

1.5-A、40-V、可調式線性電壓穩壓器

產品詳細資料

Output options Adjustable Output Iout (max) (A) 1.5 Vin (max) (V) 40 Vin (min) (V) 3 Vout (max) (V) 37 Vout (min) (V) 1.25 Noise (µVrms) 38 Iq (typ) (mA) 5 Thermal resistance θJA (°C/W) 24 Rating Catalog Load capacitance (min) (µF) 0 Regulated outputs (#) 1 Accuracy (%) 5 PSRR at 100 KHz (dB) 38 Dropout voltage (Vdo) (typ) (mV) 2000 Operating temperature range (°C) 0 to 125
Output options Adjustable Output Iout (max) (A) 1.5 Vin (max) (V) 40 Vin (min) (V) 3 Vout (max) (V) 37 Vout (min) (V) 1.25 Noise (µVrms) 38 Iq (typ) (mA) 5 Thermal resistance θJA (°C/W) 24 Rating Catalog Load capacitance (min) (µF) 0 Regulated outputs (#) 1 Accuracy (%) 5 PSRR at 100 KHz (dB) 38 Dropout voltage (Vdo) (typ) (mV) 2000 Operating temperature range (°C) 0 to 125
SOT-223 (DCY) 4 45.5 mm² 6.5 x 7 TO-220 (KCS) 3 46.228 mm² 10.16 x 4.55 TO-263 (KTT) 3 154.8384 mm² 10.16 x 15.24
  • Output voltage range adjustable
    from 1.25 V to 37 V
  • Output current greater than 1.5 A
  • Internal short-circuit current limiting
  • Thermal overload protection
  • Output safe-area compensation
  • Output voltage range adjustable
    from 1.25 V to 37 V
  • Output current greater than 1.5 A
  • Internal short-circuit current limiting
  • Thermal overload protection
  • Output safe-area compensation

The LM317 device is an adjustable three-terminal positive-voltage regulator capable of supplying more than 1.5 A over an output-voltage range of 1.25 V to 37 V. It requires only two external resistors to set the output voltage. The device features a typical line regulation of 0.01% and typical load regulation of 0.1%. It includes current limiting, thermal overload protection, and safe operating area protection. Overload protection remains functional even if the ADJUST terminal is disconnected.

The LM317 device is an adjustable three-terminal positive-voltage regulator capable of supplying more than 1.5 A over an output-voltage range of 1.25 V to 37 V. It requires only two external resistors to set the output voltage. The device features a typical line regulation of 0.01% and typical load regulation of 0.1%. It includes current limiting, thermal overload protection, and safe operating area protection. Overload protection remains functional even if the ADJUST terminal is disconnected.

下載 觀看有字幕稿的影片 影片

您可能會感興趣的類似產品

open-in-new 比較替代產品
引腳對引腳的功能與所比較的產品相同
LM317A 現行 具高精確度的 1.5-A、40-V、可調式線性電壓穩壓器 Pin-to-pin equivalent with improved performance
LM317HV 現行 1.5-A、60-V、可調式線性電壓穩壓器 This product is a higher voltage (60-V), 1.5-A linear regulator

技術文件

star =TI 所選的此產品重要文件
找不到結果。請清除您的搜尋條件,然後再試一次。
檢視所有 28
類型 標題 日期
* Data sheet LM317 3-Terminal Adjustable Regulator datasheet (Rev. Y) PDF | HTML 2020年 4月 29日
Application note LDO Noise Demystified (Rev. B) PDF | HTML 2020年 8月 18日
Application note A Topical Index of TI LDO Application Notes (Rev. F) 2019年 6月 27日
Application note Accurate Thermal Calculations on the Back of a Napkin 2019年 6月 3日
Application note Fundamental Theory of PMOS LDO Voltage Regulators (Rev. A) 2018年 8月 17日
Selection guide Low Dropout Regulators Quick Reference Guide (Rev. P) 2018年 3月 21日
Application note LDO PSRR Measurement Simplified (Rev. A) PDF | HTML 2017年 8月 9日
Technical article Designing an IoT modular light PDF | HTML 2016年 6月 17日
Technical article How to create power solutions: solar power PDF | HTML 2016年 1月 19日
Application note A Topical Index of TI Supply Voltage Supervisor (SVS) Application Notes 2015年 6月 15日
Application note Linear power for automated industrial systems 2015年 1月 9日
Analog Design Journal Techniques for accurate PSRR measurements 2013年 10月 28日
Application note AB-12 Wide Adjustable Range PNP Voltage Regulator (Rev. B) 2013年 5月 6日
Application note AN-1028 Maximum Power Enhancement Techniques for Power Packages (Rev. B) 2013年 5月 6日
Application note AN-1148 Linear Regulators: Theory of Operation and Compensation (Rev. B) 2013年 5月 6日
Application note AN-42 IC Provides On-Card Regulation for Logic Circuits (Rev. B) 2013年 5月 6日
Application note AN-178 Applications for an Adjustable IC Power Regulator (Rev. B) 2013年 5月 5日
Application note AN-182 Improving Power Supply Reliability with IC Power Regulators (Rev. B) 2013年 5月 5日
Application note Method For Cal Output Voltage Tolerances in Adj Regs (Rev. A) 2013年 5月 5日
Application note AN-1482 LDO Regulator Stability Using Ceramic Output Capacitors (Rev. A) 2013年 4月 25日
Application note AN-1061 Power Conversion in Line-Powered Equipment (Rev. B) 2013年 4月 23日
Application note High-Efficiency Reg has Low Drop-Out Voltage (Rev. B) 2013年 4月 23日
Application note AN-1950 Silently Powering Low Noise Applications (Rev. A) 2013年 4月 22日
Application note LDO Performance Near Dropout 2010年 10月 8日
Application note Linear and Switching Voltage Regulator Fundamental Part 1 2007年 3月 21日
Application note A New Production Technique for Trimming Voltage Regulators 2002年 10月 3日
Application note Adjustable 3-Terminal Regulator for Low-Cost Battery Charging Systems 2002年 10月 3日
Application note High Stability Regulators 2002年 10月 3日

設計與開發

如需其他條款或必要資源,請按一下下方的任何標題以檢視詳細頁面 (如有)。

開發板

LM317A-337N-EVM — 3 針腳可調整穩壓器評估模組

The LM317A-337N-EVM demonstrates canonical application of the LM317A adjustable regulator and its negative complement, the LM337-N. The evaluation module (EVM) is assesmbled with the SOT-223 package option for each device, supplying up to 1 A of load current. The EVM is designed for easy (...)

使用指南: PDF
TI.com 無法提供
模擬型號

LM317 PSpice Transient Model

SBVM440.ZIP (34 KB) - PSpice Model
模擬型號

LM317 TINA-TI Transient Model

SBVM441.ZIP (8 KB) - TINA-TI Spice Model
模擬型號

LM317 TINA-TI Transient Reference Design

SBVM442.TSC (606 KB) - TINA-TI Reference Design
模擬型號

LM317 Unencrypted PSpice Transient Model

SLVMC40.ZIP (1 KB) - PSpice Model
參考設計

TIDM-SOLARUINV — 具有 MPPT 的併網型太陽能微逆變器

This design is a digitally-controlled, grid-tied, solar micro inverter with maximum power point tracking (MPPT). Solar micro inverters are an emerging segment of the solar power industry. Rather than linking every solar panel in an installation to a central inverter, solar micro inverter-based (...)
使用指南: PDF
電路圖: PDF
參考設計

PMP20396 — 400V 輸入、50W 輸出多輸出偏壓供電參考設計

PMP20396 is a multiple-output isolated bias supply reference design. With 100V or above input voltage, this design can provide maximum 2W output power. With 300V or above input voltage, this design can provide maximum 50W output power. Four different outputs are provided in this design - 5V/500mA (...)
Test report: PDF
電路圖: PDF
參考設計

PMP8930 — 具有 85 至 265V AC 輸入高輸出能量儲存的初級側穩壓返馳參考設計

The PMP8930 reference design uses the UCC28710 primary-side regulated flyback controller to generate a 20V output from a univeral AC input. a bulk capacitor with slow-charge-fast-discharge circuit is placed at flyback output to provide long hold up time for the following step-down DC-DC stages. (...)
Test report: PDF
封裝 引腳 下載
SOT-223 (DCY) 4 檢視選項
TO-220 (KCS) 3 檢視選項
TO-263 (KTT) 3 檢視選項

訂購與品質

內含資訊:
  • RoHS
  • REACH
  • 產品標記
  • 鉛塗層/球物料
  • MSL 等級/回焊峰值
  • MTBF/FIT 估算值
  • 材料內容
  • 資格摘要
  • 進行中可靠性監測
內含資訊:
  • 晶圓廠位置
  • 組裝地點

建議產品可能具有與此 TI 產品相關的參數、評估模組或參考設計。

支援與培訓

內含 TI 工程師技術支援的 TI E2E™ 論壇

內容係由 TI 和社群貢獻者依「現狀」提供,且不構成 TI 規範。檢視使用條款

若有關於品質、封裝或訂購 TI 產品的問題,請參閱 TI 支援。​​​​​​​​​​​​​​

影片