LM48560

現行

具 I2C 控制和整合式 30-V H 類升壓的單聲道、類比輸入、陶瓷揚聲器驅動器

立即訂購

產品規格表

document-pdfAcrobat LM48560 Boomer™ Audio Power Amplifier Series High Voltage Class H Ceramic Speaker Driver With Automatic Level Control datasheet (Rev. F) (英文) PDF | HTML

LM48560

現行

產品規格表

立即訂購

產品詳細資料

Features

Very low power consumption

Haptic actuator type

Piezo

Input signal

Analog

Output voltage (max) (V)

30

Shutdown current (ISD) (µA)

0.1

Boost voltage (max) (V)

30

Vs (max) (V)

5.5

Vs (min) (V)

2.7

Operating temperature range (°C)

-40 to 85

Rating

Catalog

Features

Very low power consumption

Haptic actuator type

Piezo

Input signal

Analog

Output voltage (max) (V)

30

Shutdown current (ISD) (µA)

0.1

Boost voltage (max) (V)

30

Vs (max) (V)

5.5

Vs (min) (V)

2.7

Operating temperature range (°C)

-40 to 85

Rating

Catalog

DSBGA (YZR)

16

5.0625 mm² (— mm × — mm)

Class H Topology
Integrated Boost Converter
Bridge-Tied Load (BTL) Output
Selectable Differential Inputs
Selectable Control Interfaces
- (Hardware or Software mode)
I²C Programmable ALC
Low Supply Current
Minimum External Components
Micro-Power Shutdown
Available in Space-Saving DSBGA Package
Key Specifications:
- Output Voltage at V_DD = 3.6 V,
  R_L = 1.5 µF + 10 Ω, THD+N ≤ 1%
  - 30 V_P-P(Typical)
- Quiescent Power Supply Current
  at 3.6 V (ALC Enabled)
  - 4 mA (Typical)
- Power Dissipation at 25 V_P–P, 1 W (Typical)
- Shutdown Current, 0.1 µA (Typical)

Class H Topology
Integrated Boost Converter
Bridge-Tied Load (BTL) Output
Selectable Differential Inputs
Selectable Control Interfaces
- (Hardware or Software mode)
I²C Programmable ALC
Low Supply Current
Minimum External Components
Micro-Power Shutdown
Available in Space-Saving DSBGA Package
Key Specifications:
- Output Voltage at V_DD = 3.6 V,
  R_L = 1.5 µF + 10 Ω, THD+N ≤ 1%
  - 30 V_P-P(Typical)
- Quiescent Power Supply Current
  at 3.6 V (ALC Enabled)
  - 4 mA (Typical)
- Power Dissipation at 25 V_P–P, 1 W (Typical)
- Shutdown Current, 0.1 µA (Typical)

The LM48560 device is a high voltage, high efficiency, Class H driver for ceramic speakers and piezo actuators. The LM48560 device’s Class H architecture offers significant power savings compared to traditional Class AB amplifiers. The device provides 30 V_P–P output drive while consuming just 4 mA of quiescent current from a 3.6 V supply.

The LM48560 device features TI’s unique automatic level control (ALC) that provides output limiter functionality. The LM48560 device features two fully differential inputs with separate gain settings, and a selectable control interface. In software control mode, the gain control and device modes are configured through the I²C interface. In hardware control mode, the gain and input mux are configured through a pair of logic inputs.

The LM48560 device has a low power shutdown mode that reduces quiescent current consumption to 0.1 µA. The LM48560 device is available in an ultra-small 16-bump DSBGA package (1.97 mm × 1.97 mm).

The LM48560 device is a high voltage, high efficiency, Class H driver for ceramic speakers and piezo actuators. The LM48560 device’s Class H architecture offers significant power savings compared to traditional Class AB amplifiers. The device provides 30 V_P–P output drive while consuming just 4 mA of quiescent current from a 3.6 V supply.

The LM48560 device features TI’s unique automatic level control (ALC) that provides output limiter functionality. The LM48560 device features two fully differential inputs with separate gain settings, and a selectable control interface. In software control mode, the gain control and device modes are configured through the I²C interface. In hardware control mode, the gain and input mux are configured through a pair of logic inputs.

The LM48560 device has a low power shutdown mode that reduces quiescent current consumption to 0.1 µA. The LM48560 device is available in an ultra-small 16-bump DSBGA package (1.97 mm × 1.97 mm).

filter

尋找其它壓電式驅動器

下載觀看有字幕稿的影片影片

技術文件

找不到結果。請清除您的搜尋條件，然後再試一次。

檢視所有 1

重要文件	類型	標題	格式選項	下載最新的英文版本		日期
*	資料表	LM48560 Boomer™ Audio Power Amplifier Series High Voltage Class H Ceramic Speaker Driver With Automatic Level Control datasheet (Rev. F)	PDF \| HTML			2015/12/3

設計與開發

如需其他條款或必要資源，請按一下下方的任何標題以檢視詳細頁面 (如有)。

開發板

LM48560TLEVAL — 具有自動音量控制的高電壓 H 級陶瓷喇叭驅動器

The LM48560TLEVAL provides an evaluation platform for the LM48560. The LM48560 is a high voltage, high efficiency, Class H driverfor ceramic speakers and piezo actuators. The LM48560's Class H architecture offers significant power savings compared to traditional Class AB amplifiers. The device (...)

使用指南: PDF

支援產品和硬體

有庫存

限制：

登入以進行訂購

lock

登入以檢視庫存

??asset.out-of-stock-ti_zh_TW??

無法提供

開發模組 (EVM) 的 GUI