首頁 電源管理 電源開關 eFuses 和熱插拔制器

LM5060

現行

5.5-V 至 65-V 高側保護控制器

現在提供此產品的更新版本

open-in-new 比較替代產品
功能相似於所比較的產品
最新 TPS4800-Q1 預覽 具有保護與診斷功能的車用 100-V 低 IQ 高壓側驅動器 Wider operating input voltage range, current monitoring, short circuit protection and lower disable mode shutdown current

產品詳細資料

FET External Vin (min) (V) 5.5 Vin (max) (V) 65 Vabsmax_cont (V) 75 Current limit (min) (A) 0.01 Current limit (max) (A) 500 Overcurrent response current limiting Fault response Latch-off Soft start Adjustable Overvoltage response Cut-off Features Fault output, Power good signal Rating Catalog Device type eFuses and hot swap controllers Operating temperature range (°C) -40 to 125 Function Adjustable current limit, Inrush current control, Overvoltage protection, Power good signal, Short circuit protection
FET External Vin (min) (V) 5.5 Vin (max) (V) 65 Vabsmax_cont (V) 75 Current limit (min) (A) 0.01 Current limit (max) (A) 500 Overcurrent response current limiting Fault response Latch-off Soft start Adjustable Overvoltage response Cut-off Features Fault output, Power good signal Rating Catalog Device type eFuses and hot swap controllers Operating temperature range (°C) -40 to 125 Function Adjustable current limit, Inrush current control, Overvoltage protection, Power good signal, Short circuit protection
VSSOP (DGS) 10 14.7 mm² 3 x 4.9
  • Available in Automotive Grade / AEC Q-100
  • Wide operating input voltage range:
    5.5 V to 65 V
  • Functional safety capable
    • Documentation available to aid functional safety system design
  • Less than 15-µA quiescent current in disabled mode
  • Controlled output rise time for safe connection of capacitive loads
  • Charge pump gate driver for external N-Channel MOSFET
  • Adjustable Undervoltage Lockout (UVLO) with hysteresis
  • UVLO Serves as second enable input for systems requiring safety redundancy
  • Programmable fault detection delay time
  • MOSFET latched off after load fault is detected
  • Active low open drain POWER GOOD (nPGD) output
  • Adjustable input Overvoltage Protection (OVP)
  • Immediate restart after overvoltage shutdown
  • 10-Lead VSSOP
  • Available in Automotive Grade / AEC Q-100
  • Wide operating input voltage range:
    5.5 V to 65 V
  • Functional safety capable
    • Documentation available to aid functional safety system design
  • Less than 15-µA quiescent current in disabled mode
  • Controlled output rise time for safe connection of capacitive loads
  • Charge pump gate driver for external N-Channel MOSFET
  • Adjustable Undervoltage Lockout (UVLO) with hysteresis
  • UVLO Serves as second enable input for systems requiring safety redundancy
  • Programmable fault detection delay time
  • MOSFET latched off after load fault is detected
  • Active low open drain POWER GOOD (nPGD) output
  • Adjustable input Overvoltage Protection (OVP)
  • Immediate restart after overvoltage shutdown
  • 10-Lead VSSOP

The LM5060 high-side protection controller provides intelligent control of a high-side N-channel MOSFET during normal on/off transitions and fault conditions. In-rush current is controlled by the nearly constant rise time of the output voltage. A POWER GOOD output indicates when the output voltage reaches the input voltage and the MOSFET is fully on. Input UVLO (with hysteresis) is provided as well as programmable input OVP. An enable input provides remote on or off control. The programmable UVLO input can be used as second enable input for safety redundancy. A single capacitor programs the initial start-up VGS fault detection delay time, the transition VDS fault detection delay time, and the continuous over-current VDS fault detection delay time. When a detected fault condition persists longer than the allowed fault delay time, the MOSFET is latched off until either the enable input or the UVLO input is toggled low and then high.

The LM5060 high-side protection controller provides intelligent control of a high-side N-channel MOSFET during normal on/off transitions and fault conditions. In-rush current is controlled by the nearly constant rise time of the output voltage. A POWER GOOD output indicates when the output voltage reaches the input voltage and the MOSFET is fully on. Input UVLO (with hysteresis) is provided as well as programmable input OVP. An enable input provides remote on or off control. The programmable UVLO input can be used as second enable input for safety redundancy. A single capacitor programs the initial start-up VGS fault detection delay time, the transition VDS fault detection delay time, and the continuous over-current VDS fault detection delay time. When a detected fault condition persists longer than the allowed fault delay time, the MOSFET is latched off until either the enable input or the UVLO input is toggled low and then high.

下載 觀看有字幕稿的影片 影片

您可能會感興趣的類似產品

open-in-new 比較替代產品
引腳對引腳的功能與所比較的產品相同
LM5060-Q1 現行 車用 5.5-V 至 65-V 高側保護控制器 This product is the automotive qualified version.
功能相似於所比較的產品
LM7480-Q1 現行 用於驅動背對背 NFET 的 3V 至 65V、車用理想二極體控制器 This product offers lower Iq, lower voltage support and a higher gate drive to support higher power applications.
TPS1663 現行 具有輸出功率限制的 4.5V 至 60V、31mΩ、0.6-6A eFuse Need a smaller solution? This device offers an integrated FET to reduce the solution size for 24V/6A applications.
TPS2660 現行 具有整合式輸入反向極性防護功能的 4.2-V 至 60-V、150mΩ、0.1-2.23A eFuse Need a smaller solution? This device offers integrated back-to-back FETs to reduce the solution size for 24V/2A applications.

技術文件

star =TI 所選的此產品重要文件
找不到結果。請清除您的搜尋條件,然後再試一次。
檢視所有 5
類型 標題 日期
* Data sheet LM5060 High-Side Protection Controller With Low Quiescent Current datasheet (Rev. H) PDF | HTML 2019年 12月 23日
E-book 11 Ways to Protect Your Power Path 2019年 7月 3日
Selection guide Power Management Guide 2018 (Rev. R) 2018年 6月 25日
EVM User's guide AN-2000 LM5060EVAL Evaluation Board (Rev. C) 2013年 5月 6日
Application note Surge Stopping and Reverse Voltage Protection with the LM5069 2013年 4月 11日

設計與開發

如需其他條款或必要資源,請按一下下方的任何標題以檢視詳細頁面 (如有)。

開發板

LM5060EVAL — 適用於 LM5060 的評估板

The LM5060 evaluation board is designed to demonstrate the capabilities of the LM5060 high side protection controller with low quiescent current. It is intended for evaluation of the functions of the LM5060. One high side N-channel power MOSFET is used. The evaluation board is designed to highlight (...)

使用指南: PDF
TI.com 無法提供
開發套件

EVMK2GX — 66AK2Gx 1GHz 評估模組

The EVMK2GX (also known as "K2G") 1GHz evaluation module (EVM) enables developers to immediately start evaluating the 66AK2Gx processor family, and to accelerate the development of audio, industrial motor control, smart grid protection and other high reliability, real-time compute intensive (...)

使用指南: PDF
TI.com 無法提供
開發套件

EVMK2GXS — 66AK2Gx (K2G) 1 GHz 高安全性評估模組

The K2G 1GHz High Secure Evaluation Module (EVM) enables developers to start  evaluating and testing the programming of the  high secure developmental version of the  66AK2Gx processor, and to accelerate the next stage of secure boot product development of audio and industrial real (...)

使用指南: PDF
模擬型號

LM5060 TINA-TI Reference Design (Rev. A)

SNVMA08A.TSC (153 KB) - TINA-TI Reference Design
模擬型號

LM5060 TINA-TI Transient Spice Model (Rev. A)

SNVMA09A.ZIP (26 KB) - TINA-TI Spice Model
模擬型號

LM5060 Unencrypted PSpice Transient Model Package (Rev. B)

SLIM321B.ZIP (77 KB) - PSpice Model
計算工具

SLVC667 LM5060 Design Calculator

支援產品和硬體

支援產品和硬體

產品
eFuses 和熱插拔制器
LM5060 5.5-V 至 65-V 高側保護控制器 LM5060-Q1 車用 5.5-V 至 65-V 高側保護控制器
計算工具

TVS-RECOMMENDATION-CALC TVS diode recommendation tool

This tool suggests suitable TVS for given system parameters and abs max voltage rating of the device.
支援產品和硬體

支援產品和硬體

此設計資源支援此類別中多數產品。

檢查產品詳細資料頁面以確認支援。

模擬工具

PSPICE-FOR-TI — PSpice® for TI 設計與模擬工具

PSpice® for TI is a design and simulation environment that helps evaluate functionality of analog circuits. This full-featured, design and simulation suite uses an analog analysis engine from Cadence®. Available at no cost, PSpice for TI includes one of the largest model libraries in the (...)
參考設計

PMP22125 — 電池備援開關、充電器和監測器參考設計

A complete battery back-up, charger and monitoring is implemented with this reference design.  It includes switching between a 12/24-Vdc source and 12/24-V lead acid battery, constant current battery charging at 1A typical, battery maintenance float charge and monitoring circuits for the (...)
Test report: PDF
電路圖: PDF
參考設計

PMP40182 — 雙向電池初始化系統電源板參考設計

This reference design is a battery initialization reference design solution for automotive and battery applications. The module enables a high efficiency single stage conversion for charging and discharging the battery. This design features a 0.1% accurate current control loop using the high (...)
Test report: PDF
電路圖: PDF
參考設計

PMP10260 — 24Vdc 輸入 (雙汽車電池) 汽車多相同步降壓參考設計

This high-efficiency, high-power reference design uses the LM5119 two-phase synchronous-buck controller to regulate 14.4V at 60A. This design can be used to supply single car battery power from a double battery system, often found in trucks. Features include input EMI filtering, output hot swap (...)
Test report: PDF
電路圖: PDF
封裝 針腳 CAD 符號、佔位空間與 3D 模型
VSSOP (DGS) 10 Ultra Librarian

訂購與品質

內含資訊:
  • RoHS
  • REACH
  • 產品標記
  • 鉛塗層/球物料
  • MSL 等級/回焊峰值
  • MTBF/FIT 估算值
  • 材料內容
  • 認證摘要
  • 進行中持續性的可靠性監測
內含資訊:
  • 晶圓廠位置
  • 組裝地點

建議產品可能具有與此 TI 產品相關的參數、評估模組或參考設計。

支援與培訓

內含 TI 工程師技術支援的 TI E2E™ 論壇

內容係由 TI 和社群貢獻者依「現狀」提供,且不構成 TI 規範。檢視使用條款

若有關於品質、封裝或訂購 TI 產品的問題,請參閱 TI 支援。​​​​​​​​​​​​​​

影片