首頁 電源管理 電源保護開關與控制器 eFuse(整合式熱插拔)

LM7311

預覽

產品詳細資料

Vabsmax_cont (V) 28 Vin (max) (V) 23 Vin (min) (V) 3.5 Current limit (max) (A) 5 Features Adjustable soft start, Current monitoring, Fault output, Overvoltage protection, Reverse current blocking, Short-circuit protection, Surge protection, Thermal shutdown, adjustable UVLO Overcurrent response Short-circuit protection Fault response Auto Retry, Latch-off Ron (typ) (mΩ) 33 Overvoltage response Cut-off Rating Catalog Device type eFuses and hot swap controllers Operating temperature range (°C) -40 to 125
Vabsmax_cont (V) 28 Vin (max) (V) 23 Vin (min) (V) 3.5 Current limit (max) (A) 5 Features Adjustable soft start, Current monitoring, Fault output, Overvoltage protection, Reverse current blocking, Short-circuit protection, Surge protection, Thermal shutdown, adjustable UVLO Overcurrent response Short-circuit protection Fault response Auto Retry, Latch-off Ron (typ) (mΩ) 33 Overvoltage response Cut-off Rating Catalog Device type eFuses and hot swap controllers Operating temperature range (°C) -40 to 125
WSON (DRR) 12 9 mm² (3 mm × 3 mm)
  • Wide operating input voltage range: 3.5V to 23V
    • 28V absolute maximum
    • Output negative voltage support up to -1V
  • Integrated back-to-back FETs with low ON-resistance: RON = 33mΩ (typical)
  • 5A continuous current
  • 15A peak current for 10ms with 2% duty cycle
  • Active high enable input with adjustable undervoltage lockout (UVLO)
  • Ideal diode operation with true reverse-current blocking (RCB)
  • Fixed overvoltage (OVLO) protection with debounce time
  • Analog load current monitor output (IMON)
    • Current range: 1A to 5.5A
    • Accuracy: ±3% (IOUT≥3A)
  • Short circuit protection at startup and steady state
  • Adjustable output slew rate control (dVdT)
  • Overtemperature protection
  • IEC61000-4-2: ±8kV direct contact and ±15kV air discharge on VIN and VOUT
  • IEC61000-4-5: 35V on VIN, no cap
  • Digital output: fault indication (FLT)
  • Small footprint: DFN 3mm × 3mm
  • Wide operating input voltage range: 3.5V to 23V
    • 28V absolute maximum
    • Output negative voltage support up to -1V
  • Integrated back-to-back FETs with low ON-resistance: RON = 33mΩ (typical)
  • 5A continuous current
  • 15A peak current for 10ms with 2% duty cycle
  • Active high enable input with adjustable undervoltage lockout (UVLO)
  • Ideal diode operation with true reverse-current blocking (RCB)
  • Fixed overvoltage (OVLO) protection with debounce time
  • Analog load current monitor output (IMON)
    • Current range: 1A to 5.5A
    • Accuracy: ±3% (IOUT≥3A)
  • Short circuit protection at startup and steady state
  • Adjustable output slew rate control (dVdT)
  • Overtemperature protection
  • IEC61000-4-2: ±8kV direct contact and ±15kV air discharge on VIN and VOUT
  • IEC61000-4-5: 35V on VIN, no cap
  • Digital output: fault indication (FLT)
  • Small footprint: DFN 3mm × 3mm

The LM7311x family is a highly integrated, circuit-protection and power-management device in a small package. The devices provide multiple protection modes that use few external components and are a robust defense against overloads, short-circuits, voltage surges and excessive inrush current. With integrated back-to-back FETs, reverse-current flow from output to input is blocked at all times, making the devices an excellent choice for ORing applications, as well as systems that need load side energy holdup storage if input power supply fails. The devices use a linear ORing based scheme to maintain almost zero DC reverse current and emulate ideal diode behavior with minimum forward voltage drop and power dissipation.

Output slew rate and inrush current can be adjusted using one external capacitor. Loads are protected from input overvoltage conditions by cutting off the output if input exceeds the fixed overvoltage threshold.

The device provides an accurate sense of the output load current on the analog current monitor pin.

The device provides robust protection from overvoltages and short-circuit protection in start-up (ISFT) and Steady state (IFFT). The negative 1V DC support on VOUT provides additional robustness during inductive negative transients at VOUT.

The devices are available in a 3mm × 3mm, for improved thermal performance and reduced system footprint.

The devices are characterized for operation over a junction temperature range from –40°C to +125°C.

The LM7311x family is a highly integrated, circuit-protection and power-management device in a small package. The devices provide multiple protection modes that use few external components and are a robust defense against overloads, short-circuits, voltage surges and excessive inrush current. With integrated back-to-back FETs, reverse-current flow from output to input is blocked at all times, making the devices an excellent choice for ORing applications, as well as systems that need load side energy holdup storage if input power supply fails. The devices use a linear ORing based scheme to maintain almost zero DC reverse current and emulate ideal diode behavior with minimum forward voltage drop and power dissipation.

Output slew rate and inrush current can be adjusted using one external capacitor. Loads are protected from input overvoltage conditions by cutting off the output if input exceeds the fixed overvoltage threshold.

The device provides an accurate sense of the output load current on the analog current monitor pin.

The device provides robust protection from overvoltages and short-circuit protection in start-up (ISFT) and Steady state (IFFT). The negative 1V DC support on VOUT provides additional robustness during inductive negative transients at VOUT.

The devices are available in a 3mm × 3mm, for improved thermal performance and reduced system footprint.

The devices are characterized for operation over a junction temperature range from –40°C to +125°C.

下載 觀看有字幕稿的影片 影片

技術文件

找不到結果。請清除您的搜尋條件,然後再試一次。
檢視所有 1
重要文件 類型 標題 格式選項 下載最新的英文版本 日期
* 資料表 LM7311 3.5V–23V, 33mΩ, 5A eFuse With True Reverse Current Blocking datasheet (Rev. A) PDF | HTML 2026/11/10

設計與開發

如需其他條款或必要資源,請按一下下方的任何標題以檢視詳細頁面 (如有)。

開發板

LM7320-30EVM — LM7311、LM7320 與 LM7330 評估模組

The LM7320-30EVM evaluates the performance of the LM7311, LM7320, and LM7330 eFuse devices. The LM7320-30EVM comes with LM7311 and LM7330 eFuse for evaluation of 12V (typical) and 5A (steady state) designs.

Evaluate the LM7320 by replacing LM7311 on the U1 slot.

使用指南: PDF | HTML
支援產品和硬體
有庫存
限制:
??asset.out-of-stock-ti_zh_TW??
無法提供
模擬型號

LM7311 PSpice Transient Model

SLVMFF1.ZIP (161940 KB) - PSpice 模型
支援產品和硬體
計算工具

LM7311-CALC — LM7311 Design Calculator

The design calculator allows customer to size the external peripheral components while designing with LM7311 eFuse
支援產品和硬體
封裝 針腳 CAD 符號、佔位空間與 3D 模型
WSON (DRR) 12 Ultra Librarian

訂購與品質

建議產品可能具有與此 TI 產品相關的參數、評估模組或參考設計。

支援與培訓

內含 TI 工程師技術支援的 TI E2E™ 論壇

內容係由 TI 和社群貢獻者依「現狀」提供,且不構成 TI 規範。檢視使用條款。

若有關於品質、封裝或訂購 TI 產品的問題,請參閱 TI 支援。​​​​​​​​​​​​​​

影片