首頁 放大器 運算放大器 (op amps) 高速運算放大器 (GBW ≥ 50 MHz)
首頁
放大器
運算放大器 (op amps)
高速運算放大器 (GBW ≥ 50 MHz)

OPA2834

現行

超低功耗、50 MHz 軌至軌輸出、負電軌輸入、電壓回饋運算放大器

立即訂購
產品規格表

OPA2834

現行
產品規格表 立即訂購

產品詳細資料

Architecture Voltage FB Number of channels 2 Total supply voltage (+5 V = 5, ±5 V = 10) (min) (V) 2.7 Total supply voltage (+5 V = 5, ±5 V = 10) (max) (V) 5.4 GBW (typ) (MHz) 20 BW at Acl (MHz) 50 Acl, min spec gain (V/V) 1 Slew rate (typ) (V/µs) 26 Vn at flatband (typ) (nV√Hz) 12 Vn at 1 kHz (typ) (nV√Hz) 12 Iq per channel (typ) (mA) 0.17 Vos (offset voltage at 25°C) (max) (mV) 1.9 Rail-to-rail In to V-, Out Rating Catalog Operating temperature range (°C) -40 to 125 CMRR (typ) (dB) 104 Input bias current (max) (pA) 90000 Offset drift (typ) (µV/°C) 1.2 Iout (typ) (mA) 20 2nd harmonic (dBc) 131 3rd harmonic (dBc) 146 Frequency of harmonic distortion measurement (MHz) 0.01
Architecture Voltage FB Number of channels 2 Total supply voltage (+5 V = 5, ±5 V = 10) (min) (V) 2.7 Total supply voltage (+5 V = 5, ±5 V = 10) (max) (V) 5.4 GBW (typ) (MHz) 20 BW at Acl (MHz) 50 Acl, min spec gain (V/V) 1 Slew rate (typ) (V/µs) 26 Vn at flatband (typ) (nV√Hz) 12 Vn at 1 kHz (typ) (nV√Hz) 12 Iq per channel (typ) (mA) 0.17 Vos (offset voltage at 25°C) (max) (mV) 1.9 Rail-to-rail In to V-, Out Rating Catalog Operating temperature range (°C) -40 to 125 CMRR (typ) (dB) 104 Input bias current (max) (pA) 90000 Offset drift (typ) (µV/°C) 1.2 Iout (typ) (mA) 20 2nd harmonic (dBc) 131 3rd harmonic (dBc) 146 Frequency of harmonic distortion measurement (MHz) 0.01
VSSOP (DGK) 8 14.7 mm² (3 mm × 4.9 mm)
  • Ultra-low power:
    • Supply voltage: 2.7 V to 5.4 V
    • Quiescent current (IQ): 170 µA/ch (typical)
  • Bandwidth: 50 MHz (G = 1 V/V)
  • Slew rate: 26 V/µs
  • Settling time (0.1%): 88 ns (2-VSTEP)
  • HD2, HD3: –131 dBc, –146 dBc at 10 kHz (2 VPP)
  • Input voltage noise: 12 nV/√Hz (f = 10 kHz)
  • Input offset voltage: 350 µV (±1.9 mV max)
  • Negative rail input, rail-to-rail output (RRO)
    • Input voltage range: –0.2 V to 3.9 V
      (5-V supply)
  • Operating temperature range:
    –40°C to +125°C
  • Ultra-low power:
    • Supply voltage: 2.7 V to 5.4 V
    • Quiescent current (IQ): 170 µA/ch (typical)
  • Bandwidth: 50 MHz (G = 1 V/V)
  • Slew rate: 26 V/µs
  • Settling time (0.1%): 88 ns (2-VSTEP)
  • HD2, HD3: –131 dBc, –146 dBc at 10 kHz (2 VPP)
  • Input voltage noise: 12 nV/√Hz (f = 10 kHz)
  • Input offset voltage: 350 µV (±1.9 mV max)
  • Negative rail input, rail-to-rail output (RRO)
    • Input voltage range: –0.2 V to 3.9 V
      (5-V supply)
  • Operating temperature range:
    –40°C to +125°C

The OPA2834 is a dual-channel, ultra-low-power, rail-to-rail output, negative-rail input, voltage-feedback (VFB) operational amplifier designed to operate over a power-supply range of 2.7 V to 5.4 V with a single supply, or ±1.35 V to ±2.7 V with a dual supply. Consuming only 170 µA per channel and with a unity-gain bandwidth of 50 MHz, this amplifier sets an industry-leading performance-to-power ratio for rail-to-rail amplifiers.

For battery-powered and portable applications where low power consumption is of key importance, the OPA2834 offers an excellent bandwidth to IQ ratio. OPA2834 offers very low distortion making it very suitable for data acquisition systems and microphone pre-amplifier.

See the Device Comparison Table for a selection of low-power, low-noise, 5-V amplifiers from Texas Instruments with a gain-bandwidth product from 20 MHz to 300 MHz.

The OPA2834 is a dual-channel, ultra-low-power, rail-to-rail output, negative-rail input, voltage-feedback (VFB) operational amplifier designed to operate over a power-supply range of 2.7 V to 5.4 V with a single supply, or ±1.35 V to ±2.7 V with a dual supply. Consuming only 170 µA per channel and with a unity-gain bandwidth of 50 MHz, this amplifier sets an industry-leading performance-to-power ratio for rail-to-rail amplifiers.

For battery-powered and portable applications where low power consumption is of key importance, the OPA2834 offers an excellent bandwidth to IQ ratio. OPA2834 offers very low distortion making it very suitable for data acquisition systems and microphone pre-amplifier.

See the Device Comparison Table for a selection of low-power, low-noise, 5-V amplifiers from Texas Instruments with a gain-bandwidth product from 20 MHz to 300 MHz.
filter 尋找其它 高速運算放大器 (GBW ≥ 50 MHz)
下載 觀看有字幕稿的影片 影片

技術文件

找不到結果。請清除您的搜尋條件，然後再試一次。
檢視所有 1
重要文件 類型 標題 格式選項 下載最新的英文版本 日期
* 資料表 OPA2834 50-MHz, 170-µA, Negative-Rail In, Rail-to-Rail Out, Voltage-Feedback Amplifier datasheet (Rev. A) PDF | HTML 2019/7/12

設計與開發

如需其他條款或必要資源，請按一下下方的任何標題以檢視詳細頁面 (如有)。

開發板

AMP-PDK-EVM — 放大器性能開發套件評估模組

放大器性能開發套件 (PDK) 是一款評估模組 (EVM) 套件，可測試通用運算放大器 (op amp) 參數，並與大多數運算放大器和比較器相容。EVM 套件提供主板和多個插槽式子卡選項，可滿足封裝需求，使工程師能夠快速評估和驗證裝置性能。

AMP-PDK-EVM 套件支援五種最熱門的業界標準封裝，包括：

  • D (SOIC-8 和 SOIC-14)
  • PW (TSSOP-14)
  • DGK (VSSOP-8)
  • DBV (SOT23-5 和 SOT23-6)
  • DCK (SC70-5 和 SC70-6)
使用指南: PDF | HTML
支援產品和硬體
開發板

DEM-OPA-MSOP-2A — 適用於 MSOP-8 封裝的二路運算放大器評估模組

The DEM-OPA-MSOP-2A demonstration fixture helps designers evaluate the operation and performance of TI's dual, high speed, wideband operational amplifiers. This unpopulated PC board is compatible with products offered in the 8-lead MSOP (DGK) package.
 
For more information on these types of op amps, (...)
支援產品和硬體
有庫存
限制：
??asset.out-of-stock-ti_zh_TW??
無法提供
模擬型號

OPA2834 PSpice Model (Rev. A)

SBOMB91A.ZIP (34 KB) - PSpice 模型
支援產品和硬體
模擬型號

OPA2834 TINA-TI SPICE MODEL

SBOMAZ4.TSC (21 KB) - TINA-TI 參考設計
支援產品和硬體
計算工具

ANALOG-ENGINEER-CALC — PC software analog engineer's calculator

類比工程師的計算機旨在加速類比電路設計工程師定期使用的許多重複計算。此基於 PC 的工具提供圖形介面，列出各種常見計算，從使用回饋電阻器設定運算放大器增益到選擇適當的電路設計元件以穩定類比數位轉換器 (ADC) 驅動緩衝電路。

除了作為獨立工具使用外，此計算機還與類比工程師口袋參考中描述的概念相得益彰。

支援產品和硬體
封裝 針腳 CAD 符號、佔位空間與 3D 模型
VSSOP (DGK) 8 Ultra Librarian
適用 TI 的評估品項標準條款與條件。

訂購與品質

支援與培訓

內含 TI 工程師技術支援的 TI E2E™ 論壇

以英文檢視所有論壇主題

內容係由 TI 和社群貢獻者依「現狀」提供，且不構成 TI 規範。檢視使用條款。

若有關於品質、封裝或訂購 TI 產品的問題，請參閱 TI 支援。​​​​​​​​​​​​​​

影片