首頁 放大器 運算放大器 (op amps) 高速運算放大器 (GBW ≥ 50 MHz)
首頁
放大器
運算放大器 (op amps)
高速運算放大器 (GBW ≥ 50 MHz)

OPA690

現行

具有停用功能的寬頻電壓回饋運算放大器

立即訂購
產品規格表

OPA690

現行
產品規格表 立即訂購

產品詳細資料

Architecture Voltage FB Number of channels 1 Total supply voltage (+5 V = 5, ±5 V = 10) (min) (V) 5 Total supply voltage (+5 V = 5, ±5 V = 10) (max) (V) 12 GBW (typ) (MHz) 500 BW at Acl (MHz) 500 Acl, min spec gain (V/V) 1 Slew rate (typ) (V/µs) 1800 Vn at flatband (typ) (nV√Hz) 5.5 Vn at 1 kHz (typ) (nV√Hz) 5.5 Iq per channel (typ) (mA) 5.5 Vos (offset voltage at 25°C) (max) (mV) 4 Rail-to-rail No Features Shutdown Rating Catalog Operating temperature range (°C) -40 to 85 CMRR (typ) (dB) 65 Input bias current (max) (pA) 10000000 Offset drift (typ) (µV/°C) 10 Iout (typ) (mA) 190 2nd harmonic (dBc) 68 3rd harmonic (dBc) 70 Frequency of harmonic distortion measurement (MHz) 5
Architecture Voltage FB Number of channels 1 Total supply voltage (+5 V = 5, ±5 V = 10) (min) (V) 5 Total supply voltage (+5 V = 5, ±5 V = 10) (max) (V) 12 GBW (typ) (MHz) 500 BW at Acl (MHz) 500 Acl, min spec gain (V/V) 1 Slew rate (typ) (V/µs) 1800 Vn at flatband (typ) (nV√Hz) 5.5 Vn at 1 kHz (typ) (nV√Hz) 5.5 Iq per channel (typ) (mA) 5.5 Vos (offset voltage at 25°C) (max) (mV) 4 Rail-to-rail No Features Shutdown Rating Catalog Operating temperature range (°C) -40 to 85 CMRR (typ) (dB) 65 Input bias current (max) (pA) 10000000 Offset drift (typ) (µV/°C) 10 Iout (typ) (mA) 190 2nd harmonic (dBc) 68 3rd harmonic (dBc) 70 Frequency of harmonic distortion measurement (MHz) 5
SOIC (D) 8 29.4 mm² 4.9 x 6 SOT-23 (DBV) 6 8.12 mm² 2.9 x 2.8
  • Unity-gain stable: 535MHz (G = 1V/V)
  • High output current: 215mA
  • High slew rate: 1900V/µs
  • Low input voltage noise: 4.6nV/√Hz
  • Low distortion (RL = 100Ω, VO = 2VPP):
    • HD2, HD3 at 5MHz: –85dBc, –75dBc
  • Output voltage swing: ±3.9V
  • Low supply current: 6.1mA
  • Low disable current: 100µA
  • Supply range: 5V to 12V
  • Unity-gain stable: 535MHz (G = 1V/V)
  • High output current: 215mA
  • High slew rate: 1900V/µs
  • Low input voltage noise: 4.6nV/√Hz
  • Low distortion (RL = 100Ω, VO = 2VPP):
    • HD2, HD3 at 5MHz: –85dBc, –75dBc
  • Output voltage swing: ±3.9V
  • Low supply current: 6.1mA
  • Low disable current: 100µA
  • Supply range: 5V to 12V

The OPA690 device represents a major step forward in unity-gain stable, voltage-feedback op amps. A new input architecture provides slew rate and full-power bandwidth previously found only in wide-band, current-feedback op amps. A new output stage architecture delivers 215mA of current with a minimal headroom requirement. These capabilities combine to give exceptional slew rate of 1900V/µs into a 100Ω load. The ultra-fast settling time of 13ns makes the OPA690 an excellent choice for fast sampling systems such as high-speed ADC drivers, high-speed imaging systems, and current DAC transimpedance amplifier.

The low quiescent current of 6.1mA makes the OPA690 an excellent choice in portable or battery-powered application. System power can be reduced further using the optional disable control pin (DIS). Leaving DIS open, or holding DIS high, operates the OPA690 normally. If DIS is pulled low, the OPA690 supply current drops to less than 100µA while the output goes to a high-impedance state.

The OPA690 device represents a major step forward in unity-gain stable, voltage-feedback op amps. A new input architecture provides slew rate and full-power bandwidth previously found only in wide-band, current-feedback op amps. A new output stage architecture delivers 215mA of current with a minimal headroom requirement. These capabilities combine to give exceptional slew rate of 1900V/µs into a 100Ω load. The ultra-fast settling time of 13ns makes the OPA690 an excellent choice for fast sampling systems such as high-speed ADC drivers, high-speed imaging systems, and current DAC transimpedance amplifier.

The low quiescent current of 6.1mA makes the OPA690 an excellent choice in portable or battery-powered application. System power can be reduced further using the optional disable control pin (DIS). Leaving DIS open, or holding DIS high, operates the OPA690 normally. If DIS is pulled low, the OPA690 supply current drops to less than 100µA while the output goes to a high-impedance state.
filter 尋找其它 高速運算放大器 (GBW ≥ 50 MHz)
下載 觀看有字幕稿的影片 影片

您可能會感興趣的類似產品

open-in-new 比較替代產品
功能相同，但引腳輸出與所比較的裝置不同
OPA817 現行 800-MHz、高精密度、單位增益穩定、FET 輸入運算放大器 JFET input, lower noise (4.5 nV√Hz), and higher precision (0.25 mV)

技術文件

star =TI 所選的此產品重要文件
找不到結果。請清除您的搜尋條件，然後再試一次。
檢視所有 10
重要文件 類型 標題 格式選項 日期
* Data sheet OPA690 Wideband, Voltage-Feedback Operational Amplifier With Disable datasheet (Rev. H) PDF | HTML 2024年 10月 4日
Application note Input Voltage Effects on Slew Rate for Voltage and Current Feedback Amplifiers PDF | HTML 2025年 1月 15日
E-book The Signal e-book: A compendium of blog posts on op amp design topics 2017年 3月 28日
Application note RLC Filter Design for ADC Interface Applications (Rev. A) 2015年 5月 13日
User guide DEM-OPA-SO-1A User's Guide (Rev. B) 2012年 4月 12日
User guide DEM-OPA-SOT-1A User's Guide (Rev. B) 2012年 4月 12日
Application note A Numerical Solution to an Analog Problem 2010年 4月 25日
Application note Noise Analysis for High Speed Op Amps (Rev. A) 2005年 1月 17日
Application note ADS5500, OPA695: PC Board Layout for Low Distortion High-Speed ADC Drivers 2004年 4月 22日
Application note Measuring Board Parasitics in High-Speed Analog Design 2003年 7月 7日

設計與開發

如需其他條款或必要資源，請按一下下方的任何標題以檢視詳細頁面 (如有)。

開發板

DEM-OPA-SO-1A — 適用於 SO-8 封裝的單路運算放大器評估模組

The DEM-OPA-SO-1A demonstration fixture helps designers evaluate the operation and performance of TI's High Speed, Wide Bandwidth Operational Amplifiers. This unpopulated PC board is compatible with products offered in the 8-lead SOIC (D) package.

使用指南: PDF
TI.com 無法提供
開發板

DEM-OPA-SOT-1A — 適用於 SOT-23 5 針腳和 6 針腳封裝的單路運算放大器評估模組

DEM-OPA-SOT-1A 是一種展示電路板，用於評估高速、寬頻運算放大器的運作和性能。此未組裝的 PC 電路板與採用小型電晶體 (SOT) DBV 封裝的產品相容。

使用指南: PDF
TI.com 無法提供
模擬型號

OPA690 PSpice Model (Rev. B)

SBOM147B.ZIP (346 KB) - PSpice Model
下載
模擬型號

OPA690 TINA-TI Reference Design (Rev. C)

SBOC085C.TSC (2094 KB) - TINA-TI Reference Design
下載
模擬型號

OPA690 TINA-TI Spice Model (Rev. B)

SBOM167B.ZIP (6 KB) - TINA-TI Spice Model
下載
計算工具

ANALOG-ENGINEER-CALC — PC software analog engineer's calculator

The analog engineer’s calculator is designed to speed up many of the repetitive calculations that analog circuit design engineers use on a regular basis. This PC-based tool provides a graphical interface with a list of various common calculations ranging from setting operational-amplifier (...)

支援產品和硬體

支援產品和硬體
啟動 下載
計算工具

VOLT-DIVIDER-CALC — Voltage divider calculation tool

The voltage divider calculation tool (VOLT-DIVIDER-CALC) quickly determines a set of resistors for a voltage divider. This KnowledgeBase JavaScript utility can be used to find a set of resistors for a voltage divider to achieve the desired output voltage. VOLT-DIVIDER-CALC can also be used to (...)
立即進行設計
模擬工具

PSPICE-FOR-TI — PSpice® for TI 設計與模擬工具

PSpice® for TI 是有助於評估類比電路功能的設計和模擬環境。這款全功能設計和模擬套件使用 Cadence® 的類比分析引擎。PSpice for TI 包括業界最大的模型庫之一，涵蓋我們的類比和電源產品組合，以及特定類比行為模型，且使用無需支付費用。

PSpice for TI 設計和模擬環境可讓您使用其內建函式庫來模擬複雜的混合訊號設計。在進行佈局和製造之前，建立完整的終端設備設計和解決方案原型，進而縮短上市時間並降低開發成本。 

在 PSpice for TI 設計與模擬工具中，您可以搜尋 TI (...)
要求
模擬工具

TINA-TI — 基於 SPICE 的類比模擬程式

TINA-TI provides all the conventional DC, transient and frequency domain analysis of SPICE and much more. TINA has extensive post-processing capability that allows you to format results the way you want them. Virtual instruments allow you to select input waveforms and probe circuit nodes voltages (...)
使用指南: PDF
View Options
封裝 針腳 CAD 符號、佔位空間與 3D 模型
SOIC (D) 8 Ultra Librarian
SOT-23 (DBV) 6 Ultra Librarian
適用 TI 的評估品項標準條款與條件。

訂購與品質

內含資訊：
  • RoHS
  • REACH
  • 產品標記
  • 鉛塗層/球物料
  • MSL 等級/回焊峰值
  • MTBF/FIT 估算值
  • 材料內容
  • 認證摘要
  • 進行中的可靠性監測
內含資訊：
  • 晶圓廠位置
  • 組裝地點

支援與培訓

內含 TI 工程師技術支援的 TI E2E™ 論壇

以英文檢視所有論壇主題

內容係由 TI 和社群貢獻者依「現狀」提供，且不構成 TI 規範。檢視使用條款。

若有關於品質、封裝或訂購 TI 產品的問題，請參閱 TI 支援。​​​​​​​​​​​​​​

影片