OPA827
- Input Voltage Noise Density:
4 nV/√Hz at 1 kHz - Input Voltage Noise:
0.1 Hz to 10 Hz: 250 nVPP - Input Bias Current: 10 pA (Maximum)
- Input Offset Voltage: 150 µV (Maximum)
- Input Offset Drift: 2 µV/°C (Maximum)
- Gain Bandwidth: 22 MHz
- Slew Rate: 28 V/µs
- Quiescent Current: 4.8 mA/Ch
- Wide Supply Range: ±4 V to ±18 V
- Packages: 8-Pin SOIC and 8-Pin VSSOP
The OPA827 series of JFET operational amplifiers combine outstanding DC precision with excellent AC performance. These amplifiers offer low offset voltage (150 µV, maximum), very low drift over temperature (0.5 µV/°C, typical), low-bias current (3 pA, typical), and very low 0.1-Hz to 10-Hz noise (250 nVPP, typical). The device operates over a wide supply voltage range, ±4 V to ±18 V on a low supply current (4.8 mA/Ch, typical).
Excellent AC characteristics, such as a 22-MHz gain bandwidth product (GBW), a slew rate of 28 V/µs, and precision DC characteristics make the OPA827 series well-suited for a wide range of applications including 16-bit to 18-bit mixed signal systems, transimpedance (I/V-conversion) amplifiers, filters, precision ±10-V front ends, and professional audio applications.
The OPA827 is available in both 8-pin SOIC and 8-pin VSSOP surface-mount packages, and is specified from –40°C to 125°C.
您可能會感興趣的類似產品
引腳對引腳且具備與所比較裝置相同的功能
技術文件
類型 | 標題 | 日期 | ||
---|---|---|---|---|
* | Data sheet | OPA827 Low-Noise, High-Precision, JFET-Input Operational Amplifier datasheet (Rev. I) | PDF | HTML | 2016年 7月 29日 |
Application brief | Offset Correction Methods: Laser Trim, e-Trim, and Chopper (Rev. D) | PDF | HTML | 2024年 12月 5日 | |
Circuit design | Fast-settling low-pass filter circuit (Rev. A) | PDF | HTML | 2024年 10月 9日 | |
Circuit design | Circuit for driving an ADC with an instrumentation amplifier in high gain (Rev. A) | PDF | HTML | 2024年 9月 24日 | |
Circuit design | Circuit for driving high-voltage SAR ADC with a buffered instrumentation (Rev. A) | PDF | HTML | 2024年 9月 20日 | |
Application brief | MUX-Friendly, Precision Operational Amplifiers (Rev. C) | PDF | HTML | 2022年 2月 8日 | |
E-book | The Signal e-book: A compendium of blog posts on op amp design topics | 2017年 3月 28日 | ||
Analog Design Journal | Analog Applications Journal 4Q 2014 | 2014年 10月 24日 | ||
Analog Design Journal | Distortion and source impedance in JFET-input op amps | 2014年 10月 24日 | ||
Application note | Noise Analysis for High Speed Op Amps (Rev. A) | 2005年 1月 17日 |
設計與開發
如需其他條款或必要資源,請按一下下方的任何標題以檢視詳細頁面 (如有)。
AMP-PDK-EVM — 放大器性能開發套件評估模組
放大器性能開發套件 (PDK) 是一款評估模組 (EVM) 套件,可測試通用運算放大器 (op amp) 參數,並與大多數運算放大器和比較器相容。EVM 套件提供主板和多個插槽式子卡選項,可滿足封裝需求,使工程師能夠快速評估和驗證裝置性能。
AMP-PDK-EVM 套件支援五種最熱門的業界標準封裝,包括:
- D (SOIC-8 和 SOIC-14)
- PW (TSSOP-14)
- DGK (VSSOP-8)
- DBV (SOT23-5 和 SOT23-6)
- DCK (SC70-5 和 SC70-6)
DIP-ADAPTER-EVM — DIP 轉接器評估模組
Speed up your op amp prototyping and testing with the DIP-Adapter-EVM, which provides a fast, easy and inexpensive way to interface with small, surface-mount ICs. You can connect any supported op amp using the included Samtec terminal strips or wire them directly to existing circuits.
The (...)
DIYAMP-EVM — 通用自製 (DIY) 放大器電路評估模組
The DIYAMP-EVM is a unique evaluation module (EVM) family that provides engineers and do it yourselfers (DIYers) with real-world amplifier circuits, enabling you to quickly evaluate design concepts and verify simulations. It is available in three industry-standard packages (SC70, SOT23, SOIC) and (...)
ANALOG-ENGINEER-CALC — PC software analog engineer's calculator
The analog engineer’s calculator is designed to speed up many of the repetitive calculations that analog circuit design engineers use on a regular basis. This PC-based tool provides a graphical interface with a list of various common calculations ranging from setting operational-amplifier (...)
支援產品和硬體
產品
精密度運算放大器 (Vos<1mV)
一般用途運算放大器
音訊運算放大器
轉阻放大器
高速運算放大器 (GBW ≥ 50 MHz)
功率運算放大器
視訊放大器
線路驅動器
轉導放大器與雷射驅動器
全差分放大器
精確 ADC
生物感測 AFE
高速 ADC (≥10 MSPS)
觸控式螢幕控制器
差分放大器
儀器放大器
音訊線路接收器
類比電流感測放大器
數位電源監測器
配備整合式分流電阻器的類比電流感測放大器
具整合式分流電阻器的數位電源監測器
晶粒與晶圓服務
RF 接收器
RF 發射器
OPAMP-NOISECALC — Noise Calculator
This folder contains three tools to help in understandning and managing noise in cicuits. The included tools are:
- A noise generator tool - This is a Lab View 4-Run Time executable that generates Gaussian white noise, uniform white noise, 1/f noise, short noise, and 60Hz line noise. Temporal data, (...)
支援產品和硬體
產品
LCD 及 OLED 顯示器電源和驅動器
一般用途運算放大器
精密度運算放大器 (Vos<1mV)
CIRCUIT060001 — 單電源、低壓側、單向電流感測電路
CIRCUIT060002 — 使用 NTC 熱敏電阻電路的溫度感測
CIRCUIT060003 — 使用 PTC 熱敏電阻電路的溫度感測
CIRCUIT060004 — 低雜訊和長距離 PIR 感測器調節器電路
CIRCUIT060005 — 具有離散差分放大器電路的高壓側電流感測
CIRCUIT060006 — 橋接放大器電路
CIRCUIT060007 — 低壓側雙向電流感測電路
CIRCUIT060008 — 全波整流器電路
CIRCUIT060009 — 半波整流器電路
CIRCUIT060010 — PWM 產生器電路
CIRCUIT060011 — 單電源、二階、多回饋高通濾波器電路
CIRCUIT060012 — 單電源、二階、多回饋低通濾波器電路
CIRCUIT060014 — 具有 MOSFET 的電壓至電流 (V-I) 轉換器電路
CIRCUIT060016 — 非反向麥克風前置放大器電路
CIRCUIT060017 — 雙電源、離散、可編程增益放大器電路
CIRCUIT060019 — 具有非反相正參考電壓電路的反相運算放大器
CIRCUIT060020 — 反向放大器電路
CIRCUIT060051 — 快速趨穩低通濾波器電路
CIRCUIT060074 — 具有比較器電路的高壓側電流感測
CIRCUIT060075 — 高速過電流偵測電路
選擇 OPA388 是因為它具有最寬的頻寬、超低偏移和快速電壓轉換率。選擇 TLV3201 是因為它響應快速,傳播延遲小,僅為 40 ns,上升時間為 4.8 ns。這樣比較器就能在暫態響應時間需求內,快速響應並警示系統發生過電流事件。推拉輸出級也允許比較器直接介接微控制器的邏輯位準。TLV3201 也具備低功耗,靜態電流為 40 µA。
(...)
PSPICE-FOR-TI — PSpice® for TI 設計與模擬工具
PSpice for TI 設計和模擬環境可讓您使用其內建函式庫來模擬複雜的混合訊號設計。在進行佈局和製造之前,建立完整的終端設備設計和解決方案原型,進而縮短上市時間並降低開發成本。
在 PSpice for TI 設計與模擬工具中,您可以搜尋 TI (...)
TINA-TI — 基於 SPICE 的類比模擬程式
封裝 | 針腳 | CAD 符號、佔位空間與 3D 模型 |
---|---|---|
SOIC (D) | 8 | Ultra Librarian |
VSSOP (DGK) | 8 | Ultra Librarian |
訂購與品質
- RoHS
- REACH
- 產品標記
- 鉛塗層/球物料
- MSL 等級/回焊峰值
- MTBF/FIT 估算值
- 材料內容
- 認證摘要
- 進行中持續性的可靠性監測
- 晶圓廠位置
- 組裝地點
建議產品可能具有與此 TI 產品相關的參數、評估模組或參考設計。