TAC5311-Q1
- AEC-Q100 qualified for automotive applications
- Temperature grade 1: –40°C ≤ TA ≤ +125°C
- Mono audio ADC channel
- Performance:
- Line/Microphone differential input dynamic range: 104dB
- Differential input THD+N: –95dB
- Channel summing mode supports high SNR: 107dB
- Input voltage:
- Differential, 10VRMS full-scale inputs
- Single-ended, 5VRMS full-scale inputs
- ADC sample rate (fS) = 4kHz to 768kHz
- Programmable microphone
bias (3V to 10V):
- With an integrated efficient boost converter, or
- With external high voltage HVDD supply
- Programmable microphone
input fault diagnostics:
- Open inputs or shorted inputs
- Short to ground, MICBIAS or VBAT
- MICBIAS over current protection
- Performance:
- Mono audio DAC channel
- Performance:
- DAC to differential line-out DR: 114dB
- DAC to single-ended headphone-out DR: 108dB
- THD+N: –96dB
- Headphone/Line-out output
voltage:
- Differential, 2VRMS full-scale
- Single-ended, 1VRMS full-scale
- DAC sample rate (fs) = 4kHz to 768kHz
- Performance:
- Common Features
- Low-latency & Ultra low-latency decimation/interpolation filter options
- Programmable HPF and Biquad filters
- I2C or SPI control interface
- Audio Serial Interface
- Format: TDM, I2S or Left-justified (LJ)
- Word Length: 16, 20, 24 or 32 Bits
- Programmable PLL for flexible clocking
- Low Power Modes
- Single supply operation AVDD: 3.3V
- I/O supply operation: 1.2V, 1.8V or 3.3V
The TAC5311-Q1 is a low-power mono codec with 10VRMS differential input, 104dB ADC and 2VRMS differential output, 114dB DAC. The TAC5311-Q1 supports both differential and single-ended inputs and outputs. The device supports both microphone and line inputs on ADC channel with options for AC and DC coupling configurations. The DAC output can be configured for either line-out or headphone loads. TAC5311-Q1 can drive up to 62.5mW into a 16Ω headphone load. The device also offers an integrated high-voltage, programmable microphone bias, and input diagnostic circuitry that allows direct connection to microphone-based automotive systems with full fault diagnostic capability for direct-coupled inputs. The TAC5311-Q1 integrates an efficient boost converter to generate a high-voltage microphone bias using an external, low-voltage, 3.3V supply. The device can also directly use an external high-voltage supply (HVDD), which is any readily available supply in the system to generate this microphone bias. The TAC5311-Q1 integrates a programable channel gain, digital volume control, a low-jitter phase-locked loop (PLL), a programmable high-pass filter (HPF), programmable EQ and biquad filters, interpolation and decimation filters with low and ultra-low latency filter modes. It allows for sample rates up to 768kHz. The TAC5311-Q1 supports time-division multiplexing (TDM), I2S, or left-justified (LJ) audio formats, and can be controlled with I2C or SPI. These integrated high-performance features, along with a single, 3.3V supply operation, makes TAC5311-Q1 an excellent choice for space-constrained automotive systems.
您可能會感興趣的類似產品
針腳對針腳的功能與所比較的裝置相同。
技術文件
設計與開發
如需其他條款或必要資源，請按一下下方的任何標題以檢視詳細頁面 (如有)。
TAC5412Q15B5EVM-K — TAC5412-Q1 評估模組
PUREPATHCONSOLE — PurePath™ Console graphical development suite for audio system design and development
PurePath™ Console 是一款高度整合且容易使用的音訊開發套件，專爲簡化音訊產品開發相關評估、配置和偵錯程序所設計。瞭解使用 PurePath™ Console 3 軟體有多簡單。
PurePath Console 的直覺式圖形介面無需進階音訊工程專業，因此讓音訊設計更加簡明直觀。在簡單易用的圖形介面中，實作 PurePath Console 的眾多進階控制功能，並以縮短產品開發時間為目標，為您實現高度最佳化的音訊性能、最低功耗和順暢系統整合。支援的裝置：
PurePath™ Console 1：PCM5142、TAS5721、TAS5729MD、TAS5731 和 (...)
TAC5X1X-LINUX-DRIVER — These Linux drivers support our TAC5x1x family including ADC, DAC and CODEC.
TAX5X1X-Q1-EXT-RES-CALCULATOR — Input AC-Couple External Resistance Calculator for TAX5X1X-Q1 devices
| 封裝 | 針腳 | CAD 符號、佔位空間與 3D 模型 |
|---|---|---|
| WQFN (RTV) | 32 | Ultra Librarian |
訂購與品質
建議產品可能具有與此 TI 產品相關的參數、評估模組或參考設計。