首頁 音訊、觸覺和壓電 音訊轉換器 音訊轉碼器
首頁
音訊、觸覺和壓電
音訊轉換器
音訊轉碼器
最新

TAC5682

預覽

具 100dB DR ADC、114dB DR 接地中心 HP 放大器、12W 智慧型放大器的雙通道 SoundWire® 音訊編解碼器

立即訂購
產品規格表

TAC5682

預覽
產品規格表 立即訂購

產品詳細資料

Number of ADC channels 2 Number of DAC channels 4 Digital audio interface I2S, SoundWire, TDM Control interface I2C, SoundWire Analog inputs 2 Analog outputs 4 Features Digital mic support, Headset detect, Mic bias, Stereo Class-D amplifier, Stereo headphone amplifier Sampling rate (max) (kHz) 192 Rating Catalog ADC SNR (typ) (dB) 100 DAC SNR (typ) (dB) 114 Operating temperature range (°C) -40 to 85
Number of ADC channels 2 Number of DAC channels 4 Digital audio interface I2S, SoundWire, TDM Control interface I2C, SoundWire Analog inputs 2 Analog outputs 4 Features Digital mic support, Headset detect, Mic bias, Stereo Class-D amplifier, Stereo headphone amplifier Sampling rate (max) (kHz) 192 Rating Catalog ADC SNR (typ) (dB) 100 DAC SNR (typ) (dB) 114 Operating temperature range (°C) -40 to 85
VQFN (RSL) 48 36 mm² (6 mm × 6 mm)
  • Universal Audio Jack (UAJ)
    • ADC Channel
      • Performance:
        • Mono Mic, Single-ended (Jack Pins 3, 4)
          • DR: 100dB
          • Input Voltage: 0.4VRMS FS
        • Stereo Mic/Line In Single-ended (Jack Pins 1, 2)
          • DR: 95dB
          • Input Voltage: 1VRMS FS
        • THD+N: -85dB
      • Programmable microphone bias (2.25V or 3V)
        • Integrated MICBIAS resistor
    • DAC Channel
      • Integrated Ground Centered Stereo HP Amp
      • Performance:
        • DR: 117dB & THD+N: –90dB at 40mW
      • Output Level: 40mW at 32Ω
      • High impedance output voltage: Single-ended, 2VRMS FS
    • Common Features
      • UAJ type & Button-press detection
      • Automatic OMTP/CTIA configuration
  • Class-D Amplifier
    • Stereo 12W Class-D
    • 80% Efficiency (1W, 8Ω, 12.6V)
    • 30µVRMS A-wt. idle channel noise
    • Wide battery range support from 5V up to 23V
    • Integrated speaker protection
  • 4-Channel PDM Digital Microphone
  • Common features
    • Programmable High Pass Filter (HPF) and bi-quad filters
    • Integrated Tunable DSP and Programmable PLL
  • Temperature: -40°C ≤ TA ≤ +85°C
  • User Interface
    • SoundWire 1.2 and SDCA 1.0
    • I2C
  • Power Supplies
    • SPKVDD: 5V to 23V
    • DRVDD: 5V
    • AVDD: 1.8V, CPVDD: 1.8V
    • IOVDD: 1.2V or 1.8V
  • Universal Audio Jack (UAJ)
    • ADC Channel
      • Performance:
        • Mono Mic, Single-ended (Jack Pins 3, 4)
          • DR: 100dB
          • Input Voltage: 0.4VRMS FS
        • Stereo Mic/Line In Single-ended (Jack Pins 1, 2)
          • DR: 95dB
          • Input Voltage: 1VRMS FS
        • THD+N: -85dB
      • Programmable microphone bias (2.25V or 3V)
        • Integrated MICBIAS resistor
    • DAC Channel
      • Integrated Ground Centered Stereo HP Amp
      • Performance:
        • DR: 117dB & THD+N: –90dB at 40mW
      • Output Level: 40mW at 32Ω
      • High impedance output voltage: Single-ended, 2VRMS FS
    • Common Features
      • UAJ type & Button-press detection
      • Automatic OMTP/CTIA configuration
  • Class-D Amplifier
    • Stereo 12W Class-D
    • 80% Efficiency (1W, 8Ω, 12.6V)
    • 30µVRMS A-wt. idle channel noise
    • Wide battery range support from 5V up to 23V
    • Integrated speaker protection
  • 4-Channel PDM Digital Microphone
  • Common features
    • Programmable High Pass Filter (HPF) and bi-quad filters
    • Integrated Tunable DSP and Programmable PLL
  • Temperature: -40°C ≤ TA ≤ +85°C
  • User Interface
    • SoundWire 1.2 and SDCA 1.0
    • I2C
  • Power Supplies
    • SPKVDD: 5V to 23V
    • DRVDD: 5V
    • AVDD: 1.8V, CPVDD: 1.8V
    • IOVDD: 1.2V or 1.8V

The TAC5682 is a high-performance full-function SoundWire stereo audio codec, integrating a universal audio jack (UAJ) with a stereo Ground Centered Headphone (GCHP) amplifier, 4-channel digital mic, stereo Class-D amplifier along with an integrated DSP for advanced audio processing. The UAJ supports jack and button-press detection, and the ADC and DAC have a dynamic range of 100dB and 117dB respectively. The headphone amp can drive up to 40mW ground-centered output into 32Ω headphone loads. The integrated speaker current sense provides for real-time monitoring of the speakers and the on-chip DSP supports the Texas Instruments Smart Amp speaker protection algorithm. Additionally the TAC5682 integrates programmable channel gain, digital volume control, a low-jitter PLL, programmable High Pass Filter (HPF), along with programmable DRC and bi-quad filters. The TAC5682 supports the MIPI Alliance SoundWire® 1.2 protocol and is SDCA 1.0 compliant. The device can be controlled with I2C. These integrated high-performance features make TAC5682 an excellent single-chip choice for PC notebooks and desktop audio applications.

The TAC5682 is a high-performance full-function SoundWire stereo audio codec, integrating a universal audio jack (UAJ) with a stereo Ground Centered Headphone (GCHP) amplifier, 4-channel digital mic, stereo Class-D amplifier along with an integrated DSP for advanced audio processing. The UAJ supports jack and button-press detection, and the ADC and DAC have a dynamic range of 100dB and 117dB respectively. The headphone amp can drive up to 40mW ground-centered output into 32Ω headphone loads. The integrated speaker current sense provides for real-time monitoring of the speakers and the on-chip DSP supports the Texas Instruments Smart Amp speaker protection algorithm. Additionally the TAC5682 integrates programmable channel gain, digital volume control, a low-jitter PLL, programmable High Pass Filter (HPF), along with programmable DRC and bi-quad filters. The TAC5682 supports the MIPI Alliance SoundWire® 1.2 protocol and is SDCA 1.0 compliant. The device can be controlled with I2C. These integrated high-performance features make TAC5682 an excellent single-chip choice for PC notebooks and desktop audio applications.
filter 尋找其它 音訊轉碼器
下載 觀看有字幕稿的影片 影片

提供完整產品規格表及其他資源。立即索取

技術文件

找不到結果。請清除您的搜尋條件，然後再試一次。
檢視所有 1
重要文件 類型 標題 格式選項 下載最新的英文版本 日期
* 資料表 TAC5682 Full-function SoundWire Stereo Audio Codec with Universal Audio Jack, 4-Channel Digital Mic Support, Integrated DSP, and Stereo 12W Class-D Amplifier datasheet PDF | HTML 2026/5/12

設計與開發

如需其他條款或必要資源，請按一下下方的任何標題以檢視詳細頁面 (如有)。

開發板

TAC5682EVM-K — TAC5682 評估模組

此 TAC5x72EVM-K 和 TAC5x82EVM-K 評估模組（EVM）可讓使用者測試德州儀器 TAC5572、TAC5672、TAC5582 和 TAC5682 PC Codecs 的功能。TAC5xx2 是一款高效能全功能 SoundWire 立體聲音訊編解碼器，整合通用音訊插孔（UAJ，具接地中心耳機（HP）放大器）、4 通道數位麥克風，以及立體聲 D 類放大器。UAJ 支援插孔和按鈕按下檢測。TAC56x2 UAJ ADC 和 DAC 的動態範圍分別為 100dB 和 114dB。TAC55x2 UAJ ADC 和 DAC 的動態範圍分別為 xx 和 xx。耳機放大器可將高達 (...)

支援產品和硬體
開發模組 (EVM) 的 GUI

TAC5682-SW — 適用於 TAC5682EVM-K 的 PurePath® Console 3 GUI 及軟體

GUI and Software for PurePath® Console 3 for TAC5682EVM-K
支援產品和硬體
支援軟體

TAC5682-DESIGN — Design resources for TAC5682

Design resources for TAC5682 including full datasheet and additional resources.
支援產品和硬體
封裝 針腳 CAD 符號、佔位空間與 3D 模型
VQFN (RSL) 48 Ultra Librarian
適用 TI 的評估品項標準條款與條件。

訂購與品質

建議產品可能具有與此 TI 產品相關的參數、評估模組或參考設計。

支援與培訓

內含 TI 工程師技術支援的 TI E2E™ 論壇

以英文檢視所有論壇主題

內容係由 TI 和社群貢獻者依「現狀」提供，且不構成 TI 規範。檢視使用條款。

若有關於品質、封裝或訂購 TI 產品的問題，請參閱 TI 支援。​​​​​​​​​​​​​​

影片