首頁 音訊、觸覺和壓電 音訊放大器 喇叭、電視與條型音箱音訊放大器
首頁
音訊、觸覺和壓電
音訊放大器
喇叭、電視與條型音箱音訊放大器

TAS2780

現行

具有用於喇叭防護的 I/V 感測功能的 25W、數位輸入、4.5V 至 24V 6A 峰值智慧型放大器

立即訂購
產品規格表

TAS2780

現行
產品規格表 立即訂購

產品詳細資料

Audio input type Digital Input Architecture Class-D, Smart Amp Speaker channels (max) Mono Control interface I2C Output power (W) 25 Power stage supply (max) (V) 24 Power stage supply (min) (V) 4.5 Load (min) (Ω) 3.2 Analog supply voltage (min) (V) 3 Analog supply voltage (max) (V) 24 Rating Catalog Operating temperature range (°C) -40 to 85
Audio input type Digital Input Architecture Class-D, Smart Amp Speaker channels (max) Mono Control interface I2C Output power (W) 25 Power stage supply (max) (V) 24 Power stage supply (min) (V) 4.5 Load (min) (Ω) 3.2 Analog supply voltage (min) (V) 3 Analog supply voltage (max) (V) 24 Rating Catalog Operating temperature range (°C) -40 to 85
VQFN-HR (RYA) 30 14 mm² 3.5 x 4
  • 24-V Supply for Class-D Output Stage
  • Y-Bridge Multi-Level Supply Architecture
  • Spread Spectrum Control
  • Ultrasonic Output Support up to 40 kHz
  • 25 W, 1% THD+N (4 Ω, 18 V)
  • 30 W Maximum Output Power, 10 % THD+N
  • 83% at 1W, 4 Ω, PVDD = 12 V, VBAT1S = 3.8 V
  • 83% at 1W, 8 Ω, PVDD = 18 V, VBAT1S = 5 V
  • 85% at 1W, 4 Ω, PVDD = 18 V, VBAT1S = 5 V
  • 89% at 15W, 4 Ω, PVDD = 18 V, VBAT1S = 5 V
  • 93% at 15W , 8 Ω, PVDD = 18 V, VBAT1S = 5 V
  • <0.5 µA in Hardware Shutdown Mode
  • PVDD: 3 V to 24 V
  • VBAT1S: 2.7 V to 5.5 V
  • AVDD: 1.8 V
  • IOVDD: 1.8 V/ 3.3 V
  • SDOUT for Echo Cancellation
  • I2S/TDM: 8 Channels of 32 bits up to 96 KSPS
  • I2C: Selectable Addresses with Fast Mode+
  • Inter-Chip Communication Bus
  • 44.1 kHz to 96 kHz Sample Rates
  • Real-time IV-Sense for Speaker Protection
  • Short and Open Load Protection
  • Thermal and Over Current Protection
  • Brownout Protection with Power Limiter
  • Over Power and Low Battery Protection
  • PVDD and VBAT1S Supply Tracking Limiters
  • Thermal Foldback
  • Post Filter Feedback
  • Output Slew Rate Control
  • 24-V Supply for Class-D Output Stage
  • Y-Bridge Multi-Level Supply Architecture
  • Spread Spectrum Control
  • Ultrasonic Output Support up to 40 kHz
  • 25 W, 1% THD+N (4 Ω, 18 V)
  • 30 W Maximum Output Power, 10 % THD+N
  • 83% at 1W, 4 Ω, PVDD = 12 V, VBAT1S = 3.8 V
  • 83% at 1W, 8 Ω, PVDD = 18 V, VBAT1S = 5 V
  • 85% at 1W, 4 Ω, PVDD = 18 V, VBAT1S = 5 V
  • 89% at 15W, 4 Ω, PVDD = 18 V, VBAT1S = 5 V
  • 93% at 15W , 8 Ω, PVDD = 18 V, VBAT1S = 5 V
  • <0.5 µA in Hardware Shutdown Mode
  • PVDD: 3 V to 24 V
  • VBAT1S: 2.7 V to 5.5 V
  • AVDD: 1.8 V
  • IOVDD: 1.8 V/ 3.3 V
  • SDOUT for Echo Cancellation
  • I2S/TDM: 8 Channels of 32 bits up to 96 KSPS
  • I2C: Selectable Addresses with Fast Mode+
  • Inter-Chip Communication Bus
  • 44.1 kHz to 96 kHz Sample Rates
  • Real-time IV-Sense for Speaker Protection
  • Short and Open Load Protection
  • Thermal and Over Current Protection
  • Brownout Protection with Power Limiter
  • Over Power and Low Battery Protection
  • PVDD and VBAT1S Supply Tracking Limiters
  • Thermal Foldback
  • Post Filter Feedback
  • Output Slew Rate Control

The TAS2780 is a mono, digital input Class-D audio amplifier optimized for efficiently driving high peak power into loudspeakers. The Class-D amplifier is capable of delivering 25 W of continuous power into a 4 Ω load with less than 1% THD+N at a supply voltage of 18 V. The broad voltage input range and the high output power makes this amplifier versatile enough to work with battery or line powered systems.

The TAS2780 can be used as a conventional amp or with host-based speaker protection algorithms. The integrated speaker voltage and current sense provides for real time feedback of loudspeaker conditions to the protection algorithms through a return I2S path.

Y-Bridge power architecture improves amplifier efficiency by internally selecting the supplies for optimal headroom. Brownout prevention scheme with multiple thresholds allows reducing the gain in signal path when the supply drops.

Up to eight TAS2780 devices can share a common bus via I2S/TDM and I2C/SPI interfaces.

The TAS2780 is available in a 30 pin HR-QFN package for a compact PCB footprint.

The TAS2780 is a mono, digital input Class-D audio amplifier optimized for efficiently driving high peak power into loudspeakers. The Class-D amplifier is capable of delivering 25 W of continuous power into a 4 Ω load with less than 1% THD+N at a supply voltage of 18 V. The broad voltage input range and the high output power makes this amplifier versatile enough to work with battery or line powered systems.

The TAS2780 can be used as a conventional amp or with host-based speaker protection algorithms. The integrated speaker voltage and current sense provides for real time feedback of loudspeaker conditions to the protection algorithms through a return I2S path.

Y-Bridge power architecture improves amplifier efficiency by internally selecting the supplies for optimal headroom. Brownout prevention scheme with multiple thresholds allows reducing the gain in signal path when the supply drops.

Up to eight TAS2780 devices can share a common bus via I2S/TDM and I2C/SPI interfaces.

The TAS2780 is available in a 30 pin HR-QFN package for a compact PCB footprint.
filter 尋找其它 喇叭、電視與條型音箱音訊放大器
下載 觀看有字幕稿的影片 影片
索取更多資訊

若要申請存取 TAS2780 PurePathâ„¢ Console 軟體和其他設計資源：立即索取

<

您可能會感興趣的類似產品

open-in-new 比較替代產品
功能與所比較的裝置相似
TAS2781 現行 25W、4.5V 至 23V、數位輸入整合式音訊處理喇叭保護 D 類放大器 With integrated DSP

技術文件

star =TI 所選的此產品重要文件
找不到結果。請清除您的搜尋條件，然後再試一次。
檢視所有 9
重要文件 類型 標題 格式選項 日期
* Data sheet TAS2780 Digital Input Mono Class-D Audio Amplifier With Speaker IV Sense datasheet (Rev. B) PDF | HTML 2023年 1月 5日
Application note Y-Bridge in TAS278x Class-D Amplifiers for Improving Efficiency (Rev. A) PDF | HTML 2025年 9月 24日
Application note EMI Filter Selection in Class-D Amplifier a Post Filter Feedback Benefits and Design Considerations for TAS27X PDF | HTML 2024年 7月 2日
Application note TAS27xx Introduction to Click and Pop Noise Measurement in Class-D Audio Amplifiers PDF | HTML 2024年 3月 26日
Certificate TAS2780EVM EU RoHS Declaration of Conformity (DoC) 2021年 5月 21日
Technical article How smart amps are bringing high-fidelity audio into the smart home PDF | HTML 2021年 5月 3日
Application note Limitations of Capacitor only EMI Filters on Class-D Amplifiers PDF | HTML 2020年 7月 21日
Application note Requesting Access to Audio Software 2020年 6月 18日
Application note PCB Layout Guidelines for TAS2xxx Series Class-D Non-boosted Audio Amplifier 2019年 6月 27日

設計與開發

如需其他條款或必要資源，請按一下下方的任何標題以檢視詳細頁面 (如有)。

開發板

TAS2780EVM — 具喇叭 IV 感測的數位輸入單聲道 D 類音訊放大器的 TAS2780 評估模組

TAS2780EVM 評估模組 (EVM) 可用於評估 TAS2780，這是一款具喇叭 IV 感測的數位輸入單聲道 D 類音訊放大器。EVM 是為用作獨立評估工具而設計，並為設計人員提供將 TAS2780 放大器整合到系統中的工具，同時也提供單聲道揚聲器輸出。設計人員可使用 PurePath™ Console 3 軟體控制及設定裝置，以及加入揚聲器特性，並適當調整演算法。這些功能可量身打造系統單晶片 (SoC) 性能，以滿足設計人員的終端設備需求。

使用指南: PDF
TI.com 無法提供
應用軟體及架構

PUREPATHCONSOLE — PurePath™ Console graphical development suite for audio system design and development

PurePath™ Console is a highly integrated and easy-to-use audio development suite designed specifically to simplify the evaluation, configuration and debug process associated with the development of audio products. Watch how easy it is to use the PurePath™ Console 3 software.

PurePath Console’s (...)
支援產品和硬體

支援產品和硬體
要求
軟體轉碼器

TAS2XXX-DRIVERS — Linux driver for TI's TAS2XXX families

TAS2xxx Linux driver supports TI's TAS device families. This Linux driver implements a flexible and configurable register setting for one or multiple devices in a bin file, will enable fast development for applications.
支援產品和硬體

支援產品和硬體
下載選項
支援軟體

TAS2780-SW — TAS2780 software

TAS2780 software
支援產品和硬體

支援產品和硬體
要求
模擬工具

PSPICE-FOR-TI — PSpice® for TI 設計與模擬工具

PSpice® for TI 是有助於評估類比電路功能的設計和模擬環境。這款全功能設計和模擬套件使用 Cadence® 的類比分析引擎。PSpice for TI 包括業界最大的模型庫之一，涵蓋我們的類比和電源產品組合，以及特定類比行為模型，且使用無需支付費用。

PSpice for TI 設計和模擬環境可讓您使用其內建函式庫來模擬複雜的混合訊號設計。在進行佈局和製造之前，建立完整的終端設備設計和解決方案原型，進而縮短上市時間並降低開發成本。 

在 PSpice for TI 設計與模擬工具中，您可以搜尋 TI (...)
要求
封裝 針腳 CAD 符號、佔位空間與 3D 模型
VQFN-HR (RYA) 30 Ultra Librarian
適用 TI 的評估品項標準條款與條件。

訂購與品質

內含資訊：
  • RoHS
  • REACH
  • 產品標記
  • 鉛塗層/球物料
  • MSL 等級/回焊峰值
  • MTBF/FIT 估算值
  • 材料內容
  • 認證摘要
  • 進行中的可靠性監測
內含資訊：
  • 晶圓廠位置
  • 組裝地點

建議產品可能具有與此 TI 產品相關的參數、評估模組或參考設計。

支援與培訓

內含 TI 工程師技術支援的 TI E2E™ 論壇

以英文檢視所有論壇主題

內容係由 TI 和社群貢獻者依「現狀」提供，且不構成 TI 規範。檢視使用條款。

若有關於品質、封裝或訂購 TI 產品的問題，請參閱 TI 支援。​​​​​​​​​​​​​​

影片