TLV1702
- Supply Range:
+2.2 V to +36 V or ±1.1 V to ±18 V - Low Quiescent Current:
55 µA per Comparator - Input Common-Mode Range Includes Both Rails
- Low Propagation Delay: 560 ns
- Low Input Offset Voltage: 300 µV
- Open Collector Outputs
- Up To 36 V Above Negative Supply Regardless of Supply Voltage
- Industrial Temperature Range:
–40°C to +125°C - Small Packages:
- Single: SC70-5, SOT-23-5, SOT553-5
- Dual: VSSOP-8, X2QFN-8
- Quad: TSSOP-14
The TLV170x family of devices offers a wide supply range, rail-to-rail inputs, low quiescent current, and low propagation delay. All these features come in industry-standard, extremely-small packages, making these devices the best general-purpose comparators available.
The open collector output offers the advantage of allowing the output to be pulled to any voltage rail up to +36 V above the negative power supply, regardless of the TLV170x supply voltage.
These devices are available in single (TLV1701), dual (TLV1702), and quad (TLV1704) channel versions. Low input offset voltage, low input bias currents, low supply current, and open-collector configuration make the TLV170x family flexible enough to handle almost any application, from simple voltage detection to driving a single relay.
All devices are specified for operation across the expanded industrial temperature range of –40°C to +125°C.
查看 TI.com 庫存中的類似產品
規格相似的產品依可用的 TI.com 庫存排序。立即檢視
技術文件
| 重要文件 | 類型 | 標題 | 格式選項 | 下載最新的英文版本 | 日期 | |
|---|---|---|---|---|---|---|
| * | 資料表 | TLV170x 2.2-V to 36-V, microPower Comparator datasheet (Rev. D) | PDF | HTML | 2015/6/9 | ||
| Circuit design | Window comparator circuit (Rev. A) | PDF | HTML | 2019/2/6 | |||
| Circuit design | Window comparator with integrated reference circuit | 2018/12/13 | ||||
| 電子書 | The Signal e-book: A compendium of blog posts on op amp design topics | PDF | HTML | 2017/3/28 |
設計與開發
如需其他條款或必要資源,請按一下下方的任何標題以檢視詳細頁面 (如有)。
AMP-PDK-EVM — 放大器性能開發套件評估模組
放大器性能開發套件 (PDK) 是一款評估模組 (EVM) 套件,可測試通用運算放大器 (op amp) 參數,並與大多數運算放大器和比較器相容。EVM 套件提供主板和多個插槽式子卡選項,可滿足封裝需求,使工程師能夠快速評估和驗證裝置性能。
AMP-PDK-EVM 套件支援五種最熱門的業界標準封裝,包括:
- D (SOIC-8 和 SOIC-14)
- PW (TSSOP-14)
- DGK (VSSOP-8)
- DBV (SOT23-5 和 SOT23-6)
- DCK (SC70-5 和 SC70-6)
TLV170x and TLV170x-Q1 TINA-TI Reference Design and Macromodel (Rev. A)
CIRCUIT060080 — 具有整合式參考電路的窗型比較器
CIRCUIT060084 — 窗型比較器電路
TIDA-00316 — 介接電流輸出霍爾感測器和 CT 與虛擬差動 ADC/MCU 的參考設計
此參考設計提供將電流輸出霍爾感測器和電流變壓器介接至虛擬差動 ADC(獨立且整合至 MCU)。訊號調整電路的兩種變體設計可分別使用雙極和單極供應電壓測量馬達電流。兩個訊號調整電路皆在 ±0.5% 範圍內提供電流測量準確度,針對操作溫度範圍從 -25°C 至 75°C 使用。
TIDA-00368 — 具有差動 ADC/MCU 且適用於介接電流輸出霍爾感測器和 CT 的參考設計
此參考設計提供將電流輸出霍爾感測器和電流變壓器介接至差動 ADC(獨立且整合至 MCU)。差動訊號調整電路的設計旨在測量馬達電流,準確度為 ±0.5%,操作溫度範圍為 -25°C 至 75°C。差動放大器的輸出共模電壓可選為 1.25V 或 2.5V。
TIDA-010005 — 軟體可配置心臟節律器偵測模組參考設計
TIPD144 — 具有磁滯功能的比較器參考設計
此 TI 驗證設計實作了具備磁滯現象的比較器。 比較器用於區分兩種不同的訊號位準。 例如,比較器可以區分過溫與正常溫度條件。 比較閾值處的雜訊或訊號變化會導致多次轉換。 磁滯設定了上限與下限閾值,以消除由雜訊引起的多次轉換。
TIPD178 — 窗口比較器參考設計
此視窗比較器參考設計具有以單 5V 供應運作的 TLV1702。 此輸出因為 TLV1702 的開集極電路輸出,可以上拉至最高 36V。 使用三個電阻器設定視窗電壓。
| 封裝 | 針腳 | CAD 符號、佔位空間與 3D 模型 |
|---|---|---|
| VSSOP (DGK) | 8 | Ultra Librarian |
| X2QFN (RUG) | 8 | Ultra Librarian |
訂購與品質
建議產品可能具有與此 TI 產品相關的參數、評估模組或參考設計。