現在提供此產品的更新版本

open-in-new 比較替代產品
功能相同,但針腳輸出與所比較的裝置不同。
TLV320ADC3120 現行 具有 106-dB SNR 的立體聲通道、768-kHz、Burr-Brown™ 音訊類比轉數位轉換器 (ADC) Smaller package, 14dB SNR performance upgrade, and more programmability
TAA3020 現行 具有 104dB SNR 的立體聲通道 768kHz 音訊類比轉數位轉換器 (ADC) Higher SNR with 112dB

產品詳細資料

Number of ADC channels 2 Sampling rate (max) (kHz) 96 Analog inputs 6 Control interface I2C Digital audio interface DSP, I2S, L, PCM, R, TDM THD+N (dB) -90 ADC SNR (typ) (dB) 92 Rating Catalog Operating temperature range (°C) -40 to 85 Analog outputs 0
Number of ADC channels 2 Sampling rate (max) (kHz) 96 Analog inputs 6 Control interface I2C Digital audio interface DSP, I2S, L, PCM, R, TDM THD+N (dB) -90 ADC SNR (typ) (dB) 92 Rating Catalog Operating temperature range (°C) -40 to 85 Analog outputs 0
VQFN (RGE) 24 16 mm² (4 mm × 4 mm)
  • Stereo Audio ADC
    • 92-dBA Signal-to-Noise Ratio
    • Supports ADC Sample Rates From 8 kHz to
      96 kHz
  • Instruction-Programmable Embedded miniDSP
  • Flexible Digital Filtering With RAM Programmable
    Coefficient, Instructions, and Built-In Processing
    Blocks
    • Low-Latency IIR Filters for Voice
    • Linear Phase FIR Filters for Audio
    • Additional Programmable IIR Filters for EQ,
      Noise Cancellation or Reduction
    • Up to 128 Programmable ADC Digital Filter
      Coefficients
  • Six Audio Inputs With Configurable Automatic
    Gain Control (AGC)
    • Programmable in Single-Ended or Fully
      Differential Configurations
    • Can Be 3-Stated for Easy Interoperability With
      Other Audio ICs
  • Low Power Consumption and Extensive Modular
    Power Control:
    • 6-mW Mono Record, 8-kHz
    • 11-mW Stereo Record, 8-kHz
    • 10-mW Mono Record, 48-kHz
    • 17-mW Stereo Record, 48-kHz
  • Dual Programmable Microphone Bias
  • Programmable PLL for Clock Generation
  • I2C Control Bus
  • Audio Serial Data Bus Supports I2S, Left/Right-
    Justified, DSP, PCM, and TDM Modes
  • Digital Microphone Input Support
  • Two GPIOs
  • Power Supplies:
    • Analog: 2.6 V to 3.6 V
    • Digital: Core: 1.65 V to 1.95 V,
      I/O: 1.1 V–3.6 V
  • 4-mm × 4-mm 24-Pin RGE (VQFN)
  • Stereo Audio ADC
    • 92-dBA Signal-to-Noise Ratio
    • Supports ADC Sample Rates From 8 kHz to
      96 kHz
  • Instruction-Programmable Embedded miniDSP
  • Flexible Digital Filtering With RAM Programmable
    Coefficient, Instructions, and Built-In Processing
    Blocks
    • Low-Latency IIR Filters for Voice
    • Linear Phase FIR Filters for Audio
    • Additional Programmable IIR Filters for EQ,
      Noise Cancellation or Reduction
    • Up to 128 Programmable ADC Digital Filter
      Coefficients
  • Six Audio Inputs With Configurable Automatic
    Gain Control (AGC)
    • Programmable in Single-Ended or Fully
      Differential Configurations
    • Can Be 3-Stated for Easy Interoperability With
      Other Audio ICs
  • Low Power Consumption and Extensive Modular
    Power Control:
    • 6-mW Mono Record, 8-kHz
    • 11-mW Stereo Record, 8-kHz
    • 10-mW Mono Record, 48-kHz
    • 17-mW Stereo Record, 48-kHz
  • Dual Programmable Microphone Bias
  • Programmable PLL for Clock Generation
  • I2C Control Bus
  • Audio Serial Data Bus Supports I2S, Left/Right-
    Justified, DSP, PCM, and TDM Modes
  • Digital Microphone Input Support
  • Two GPIOs
  • Power Supplies:
    • Analog: 2.6 V to 3.6 V
    • Digital: Core: 1.65 V to 1.95 V,
      I/O: 1.1 V–3.6 V
  • 4-mm × 4-mm 24-Pin RGE (VQFN)

The TLV320ADC3101 device is a low-power, stereo audio analog-to-digital converter (ADC) supporting sampling rates from 8 kHz to 96 kHz with an integrated programmable-gain amplifier providing up to 40-dB analog gain or AGC. A programmable miniDSP is provided for custom audio processing. Front-end input coarse attenuation of 0 dB, –6 dB, or off, is also provided. The inputs are programmable in a combination of single-ended or fully differential configurations. Extensive register-based power control is available via an I2C interface, enabling mono or stereo recording. Low power consumption makes the TLV320ADC3101 ideal for battery-powered portable equipment.

The AGC programs to a wide range of attack (7 ms to 1.4 s) and decay (50 ms to 22.4 s) times. A programmable noise-gate function is included to avoid noise pumping. Low-latency IIR filters optimized for voice and telephony are available, as well as linear-phase FIR filters optimized for audio. Programmable IIR filters are also available and may be used for sound equalization, or to remove noise components. The audio serial bus can be programmed to support I2S, left-justified, right-justified, DSP, PCM, and TDM modes. The audio bus may be operated in either master or slave mode.

A programmable integrated PLL is included for flexible clock generation and provides support for all standard audio rates from a wide range of available MCLKs, varying from 512 kHz to 50 MHz, including the most popular cases of 12-MHz, 13-MHz, 16-MHz, 19.2-MHz, and 19.68-MHz system clocks.

The TLV320ADC3101 device is a low-power, stereo audio analog-to-digital converter (ADC) supporting sampling rates from 8 kHz to 96 kHz with an integrated programmable-gain amplifier providing up to 40-dB analog gain or AGC. A programmable miniDSP is provided for custom audio processing. Front-end input coarse attenuation of 0 dB, –6 dB, or off, is also provided. The inputs are programmable in a combination of single-ended or fully differential configurations. Extensive register-based power control is available via an I2C interface, enabling mono or stereo recording. Low power consumption makes the TLV320ADC3101 ideal for battery-powered portable equipment.

The AGC programs to a wide range of attack (7 ms to 1.4 s) and decay (50 ms to 22.4 s) times. A programmable noise-gate function is included to avoid noise pumping. Low-latency IIR filters optimized for voice and telephony are available, as well as linear-phase FIR filters optimized for audio. Programmable IIR filters are also available and may be used for sound equalization, or to remove noise components. The audio serial bus can be programmed to support I2S, left-justified, right-justified, DSP, PCM, and TDM modes. The audio bus may be operated in either master or slave mode.

A programmable integrated PLL is included for flexible clock generation and provides support for all standard audio rates from a wide range of available MCLKs, varying from 512 kHz to 50 MHz, including the most popular cases of 12-MHz, 13-MHz, 16-MHz, 19.2-MHz, and 19.68-MHz system clocks.

下載 觀看有字幕稿的影片 影片

技術文件

設計與開發

如需其他條款或必要資源,請按一下下方的任何標題以檢視詳細頁面 (如有)。

開發板

TLV320ADC3101EVM-K — TLV320ADC3101 評估模組和 USB 主機板

TLV320ADC3101EVM 採用德州儀器 (TI) 模組化 EVM 外型尺寸,可直接評估裝置性能和運作特性,並簡化軟體開發和系統原型設計。TLV320ADC3101EVM-K 是一套完整的評估/展示套件,包括稱為 USB-MODEVM 介面電路板的 USB 主機板和評估軟體,可與執行 Microsoft Windows 作業系統的個人電腦 (PC) 搭配使用。TLV320ADC3101EVM-K 只需一條連接至 PC 的 USB 纜線即可運作。透過 USB 連接,就能為 EVM 供電、控制及串流音訊資料至 EVM,減少設定與配置作業。EVM (...)

使用指南: PDF
支援產品和硬體
有庫存
限制:
??asset.out-of-stock-ti_zh_TW??
無法提供
IDE、配置、編譯器或偵錯程式

PUREPATHSTUDIO — PurePath™ Studio graphical development environment

PurePath™ Studio 繪圖開發環境為容易使用的強大工具,專為簡化音訊產品軟體開發設計,並配備 miniDSP/音訊處理能力。

GDE 可讓您將這些裝置程式化,以支援各種可攜式音訊處理應用的處理需求。您可使用低階與高階音訊處理元件的程式庫,以圖形化方式完成程式設計工作。GDE 音訊元件程式庫包含各種功能,例如數位音量控制、混音器、多工器,等化、音調控制、音量、動態範圍壓縮、低音升壓和環繞音效等等。

支援產品和硬體
驅動程式或資料庫

TLV320ADC31XX-DRIVERS — TLV320ADC31XX ADC 系列 Linux 驅動程序支持

這些 Linux 驅動程式支援我們 TLV320AIC2x 裝置系列中的低功率音訊轉碼器,並包含 .c 和 .h 檔案。您可以使用下方的「前往第三方廠商」按鈕從 git.kernal.org 下載適當的驅動程式。

Linux 主線路狀態
在 Linux 主線路中可用:是
可透過 git.ti.com 取得:不適用


修復和代碼增強功能
如果需要在此驅動程式中添加修復和/或代碼增強功能,
請執行以下任一操作

1.將增補程序發送到相關的 Linux 核心社群,該社群列在維護者文件中:此處



2.聯絡您的 TI 代表
支援產品和硬體
支援軟體

SBAC293 — TLV320ADC310x C Source Headers

支援產品和硬體
模擬型號

TLV320ADC3101 IBIS Model

SLAM171.ZIP (144 KB) - IBIS 模型
支援產品和硬體
計算工具

COEFFICIENT-CALC — Coefficient Calculator For Digital Biquad Filters

COEFFICIENT-CALC (TIBQ) calculates the coefficients for the digital filter biquad transfer function implemented in TI audio codecs. The characteristics of the digital filter are adjusted by selecting a filter type and moving a control point within a window that shows the transfer function gain and (...)

支援產品和硬體
計算工具

SLAR163 — Audio CODEC/ADC PLL Calculator

支援產品和硬體
參考設計

BT-MSPAUDSOURCE-RD — 藍牙和 MSP MCU 音訊來源參考設計

客戶可以使用藍牙和低功耗 MSP 微控制器音訊來源參考設計,為玩具、投影機、智慧型遙控器以及任何音訊串流配件等應用,建立低階、低功耗音訊來源解決方案的各種應用。此參考設計為符合成本效益的音訊實作,提供完整設計檔案,讓您可以專注於應用與終端產品開發。此參考設計也提供 TI Bluetooth Stack。

支援產品和硬體
參考設計

TIDA-01589 — 具備雜訊消除與回波抵銷功能的高保真、近場雙向音訊參考設計

人機互動需要聲學介面,以提供全雙工免手持通訊。在免手持模式下,來自喇叭的部分遠端或近端音訊訊號會耦合至麥克風。此外,在雜訊環境中,除了可擷取有用的近端音訊訊號外,麥克風還會擷取環境雜訊。擷取的多麥克風音訊訊號會受到聲學背景雜訊及回波訊號破壞,這些訊號會大幅降低所需訊號的清晰度,並限制後續音訊處理系統的性能。此參考設計展示了雙麥克風,其用於透過立體聲 ADC 實現音訊輸入,透過低功耗 DSP 執行雜訊降低、聲音回波消除和其他音訊品質強化演算法。此設計還採用了 TI 智慧型放大器技術,可透過微型喇叭實現高品質、高 SPL 音訊輸出。
支援產品和硬體
封裝 針腳 CAD 符號、佔位空間與 3D 模型
VQFN (RGE) 24 Ultra Librarian

訂購與品質

建議產品可能具有與此 TI 產品相關的參數、評估模組或參考設計。

支援與培訓

內含 TI 工程師技術支援的 TI E2E™ 論壇

內容係由 TI 和社群貢獻者依「現狀」提供,且不構成 TI 規範。檢視使用條款

若有關於品質、封裝或訂購 TI 產品的問題,請參閱 TI 支援。​​​​​​​​​​​​​​

影片