首頁 電源管理 DC/DC 切換穩壓器 DC/DC 轉換器
首頁
電源管理
DC/DC 切換穩壓器
DC/DC 轉換器
最新

TLV612901

現行

5.5V, 8A, synchronous boost converter with bypass mode, I2C interface and fast transient response

立即訂購
產品規格表

TLV612901

現行
產品規格表 立即訂購

產品詳細資料

Rating Catalog Topology Boost Vin (max) (V) 5.5 Vin (min) (V) 2 Vout (max) (V) 5.5 Vout (min) (V) 2.35 Switch current limit (typ) (A) 8 Features Adjustable current limit, Automatic PWM/PFM transition, Enable, I2C, Load Disconnect, Output discharge, Pass-through mode, Spread Spectrum, Synchronous rectification EMI & noise features Spread Spectrum Operating temperature range (°C) to Iq (typ) (A) 0.00002 Duty cycle (max) (%) 90
Rating Catalog Topology Boost Vin (max) (V) 5.5 Vin (min) (V) 2 Vout (max) (V) 5.5 Vout (min) (V) 2.35 Switch current limit (typ) (A) 8 Features Adjustable current limit, Automatic PWM/PFM transition, Enable, I2C, Load Disconnect, Output discharge, Pass-through mode, Spread Spectrum, Synchronous rectification EMI & noise features Spread Spectrum Operating temperature range (°C) to Iq (typ) (A) 0.00002 Duty cycle (max) (%) 90
DSBGA (YBG) 16 2.486929 mm² (1.577 mm × 1.577 mm)
  • 1.8V to 5.5V wide VIN range
    • 2.2V start-up input voltage
  • Programmable average input current limit (3.5A to 11A) through I2C, default 8A
  • Programmable output voltage (2.35V to 5.5V) through I2C, default 5.0V
  • High efficiency and power capability
    • Default 8A average input current limit
    • Two 8mΩ (LS) / 8mΩ (HS) MOSFETs
    • 10mΩ bypass MOSFET
    • 96.3% peak efficiency at VIN = 4.2V, VOUT = 5.0V, and IOUT = 1.5A
    • Up to 94.4% efficiency at VIN = 4.2V, VOUT = 5.0V, and IOUT = 4A
  • Auto bypass mode when VIN > VOUT
  • Auto PFM, forced PWM or ultrasonic mode selectable at light load
  • Output discharge function when EN logic is low
  • True disconnection between input and output during shutdown
  • Thermal shutdown and overcurrent protection
  • Output short-circuit protection
  • I2C compatible I/F up to 1Mbps
  • 1.2V I/O logic control interface
  • 16-ball WCSP package
  • 1.8V to 5.5V wide VIN range
    • 2.2V start-up input voltage
  • Programmable average input current limit (3.5A to 11A) through I2C, default 8A
  • Programmable output voltage (2.35V to 5.5V) through I2C, default 5.0V
  • High efficiency and power capability
    • Default 8A average input current limit
    • Two 8mΩ (LS) / 8mΩ (HS) MOSFETs
    • 10mΩ bypass MOSFET
    • 96.3% peak efficiency at VIN = 4.2V, VOUT = 5.0V, and IOUT = 1.5A
    • Up to 94.4% efficiency at VIN = 4.2V, VOUT = 5.0V, and IOUT = 4A
  • Auto bypass mode when VIN > VOUT
  • Auto PFM, forced PWM or ultrasonic mode selectable at light load
  • Output discharge function when EN logic is low
  • True disconnection between input and output during shutdown
  • Thermal shutdown and overcurrent protection
  • Output short-circuit protection
  • I2C compatible I/F up to 1Mbps
  • 1.2V I/O logic control interface
  • 16-ball WCSP package

The TLV612901 is a 5.5V, 11A synchronous boost converter with integrated bypass mode for single-cell battery-powered systems. The device operates over a wide input voltage range and supports startup from 2.2V. The output voltage is programmable through I2C, ranging from 2.35V to 5.5V, with a default value of 5.0V. The TLV612901 is optimized for high power capability, fast transient response, and high efficiency across a wide battery operating range.

The TLV612901 can be used as a high-power pre-regulator to overcome input voltage droop and input current limitations of the powered system while extending battery run time. When the input voltage is higher than the target output voltage, the device automatically enters bypass mode for maximum efficiency. When the input voltage drops below the target output voltage, the device seamlessly transitions into boost mode to maintain the regulated output voltage and enable full use of the battery capacity. The device also supports forced bypass operation through I2C.

The TLV612901 also supports selectable light-load operating mode, output discharge during shutdown, and true disconnection between input and output. The TLV612901 is available in a 16-ball WCSP package.

The TLV612901 is a 5.5V, 11A synchronous boost converter with integrated bypass mode for single-cell battery-powered systems. The device operates over a wide input voltage range and supports startup from 2.2V. The output voltage is programmable through I2C, ranging from 2.35V to 5.5V, with a default value of 5.0V. The TLV612901 is optimized for high power capability, fast transient response, and high efficiency across a wide battery operating range.

The TLV612901 can be used as a high-power pre-regulator to overcome input voltage droop and input current limitations of the powered system while extending battery run time. When the input voltage is higher than the target output voltage, the device automatically enters bypass mode for maximum efficiency. When the input voltage drops below the target output voltage, the device seamlessly transitions into boost mode to maintain the regulated output voltage and enable full use of the battery capacity. The device also supports forced bypass operation through I2C.

The TLV612901 also supports selectable light-load operating mode, output discharge during shutdown, and true disconnection between input and output. The TLV612901 is available in a 16-ball WCSP package.
filter 尋找其它 DC/DC 轉換器
下載 觀看有字幕稿的影片 影片

技術文件

找不到結果。請清除您的搜尋條件，然後再試一次。
檢視所有 1
重要文件 類型 標題 格式選項 下載最新的英文版本 日期
* 資料表 TLV612901 5.5V, 11A Synchronous Boost Converter With Bypass Mode and I2 C Interface datasheet PDF | HTML 2026/8/12

設計與開發

如需其他條款或必要資源，請按一下下方的任何標題以檢視詳細頁面 (如有)。

封裝 針腳 CAD 符號、佔位空間與 3D 模型
DSBGA (YBG) 16 Ultra Librarian
適用 TI 的評估品項標準條款與條件。

訂購與品質

支援與培訓

內含 TI 工程師技術支援的 TI E2E™ 論壇

以英文檢視所有論壇主題

內容係由 TI 和社群貢獻者依「現狀」提供，且不構成 TI 規範。檢視使用條款。

若有關於品質、封裝或訂購 TI 產品的問題，請參閱 TI 支援。​​​​​​​​​​​​​​

影片