首頁 電源管理 DC/DC 切換穩壓器 DC/DC 轉換器

TLV62585

現行

採用 2x2 QFN 或 SOT563 封裝的 2.5V-5.5V 輸入 3-A 高效降壓轉換器

現在提供此產品的更新版本

open-in-new 比較替代產品
針腳對針腳的功能與所比較的裝置相同。
TPS62A03 現行 採用 SOT-563 封裝的 2.5V 至 5.5V 輸入、3A 高效率同步降壓轉換器 See OPN
功能相同,但針腳輸出與所比較的裝置不同。
TPS62826 現行 採用 1.5-mm x 1.5-mm VSON-HR 封裝,具有 1% 準確度的 2.4-V-5.5-V 輸入、3-A 降壓轉換器 Converter with higher output voltage accuracy, higher switching frequency (2.2 MHz) in a smaller 1.5-mm x 1.5-mm QFN package.

產品詳細資料

Rating Catalog Topology Buck Iout (max) (A) 3 Vin (max) (V) 5.5 Vin (min) (V) 2.5 Vout (max) (V) 5.5 Vout (min) (V) 0.6 Features Enable, Light Load Efficiency, Light load efficiency, Output discharge, Over Current Protection, Power good, Pre-Bias Start-Up, Synchronous Rectification, UVLO Fixed, UVLO fixed Control mode COT Operating temperature range (°C) -40 to 125 Iq (typ) (A) 0.000035 Duty cycle (max) (%) 100
Rating Catalog Topology Buck Iout (max) (A) 3 Vin (max) (V) 5.5 Vin (min) (V) 2.5 Vout (max) (V) 5.5 Vout (min) (V) 0.6 Features Enable, Light Load Efficiency, Light load efficiency, Output discharge, Over Current Protection, Power good, Pre-Bias Start-Up, Synchronous Rectification, UVLO Fixed, UVLO fixed Control mode COT Operating temperature range (°C) -40 to 125 Iq (typ) (A) 0.000035 Duty cycle (max) (%) 100
SOT-5X3 (DRL) 6 2.56 mm² (1.6 mm × 1.6 mm) VQFN-HR (RWT) 12 4 mm² (2 mm × 2 mm)
  • Up to 95% efficiency
  • Low RDS(ON) power switches 56 mΩ / 32 mΩ
  • 2.5-V to 5.5-V input voltage range
  • Adjustable output voltage from 0.6-V to VIN
  • Power save mode for light load efficiency
  • 100% duty cycle for lowest dropout
  • 35-µA operating quiescent current
  • 1.5-MHz typical switching frequency
  • Short circuit protection (HICCUP)
  • Output discharge
  • Power good output
  • Thermal shutdown protection
  • Available in 2-mm × 2-mm QFN or 1.6-mm x 1.6-mm SOT563 package
  • Create a custom design using the TLV62585 with the WEBENCH® Power Designer
  • Up to 95% efficiency
  • Low RDS(ON) power switches 56 mΩ / 32 mΩ
  • 2.5-V to 5.5-V input voltage range
  • Adjustable output voltage from 0.6-V to VIN
  • Power save mode for light load efficiency
  • 100% duty cycle for lowest dropout
  • 35-µA operating quiescent current
  • 1.5-MHz typical switching frequency
  • Short circuit protection (HICCUP)
  • Output discharge
  • Power good output
  • Thermal shutdown protection
  • Available in 2-mm × 2-mm QFN or 1.6-mm x 1.6-mm SOT563 package
  • Create a custom design using the TLV62585 with the WEBENCH® Power Designer

The TLV62585 device is a high-frequency synchronous step-down converter optimized for compact solution size and high efficiency. The device integrates switches capable of delivering an output current up to 3 A. At medium to heavy loads, the converter operates in pulse width modulation (PWM) mode with typical 1.5-MHz switching frequency. At light load, the device automatically enters Power Save Mode (PSM) to maintain high efficiency over the entire load current range. In shutdown, the current consumption is reduced to less than 2 µA.

The internal compensation circuit allows a compact solution and small external components. An internal soft start circuit limits the inrush current during startup. Other features like short circuit protection, thermal shutdown protection, output discharge and power good are built-in.

The device is available in a 2-mm × 2-mm QFN or 1.6-mm x 1-6-mm SOT563 package.

The TLV62585 device is a high-frequency synchronous step-down converter optimized for compact solution size and high efficiency. The device integrates switches capable of delivering an output current up to 3 A. At medium to heavy loads, the converter operates in pulse width modulation (PWM) mode with typical 1.5-MHz switching frequency. At light load, the device automatically enters Power Save Mode (PSM) to maintain high efficiency over the entire load current range. In shutdown, the current consumption is reduced to less than 2 µA.

The internal compensation circuit allows a compact solution and small external components. An internal soft start circuit limits the inrush current during startup. Other features like short circuit protection, thermal shutdown protection, output discharge and power good are built-in.

The device is available in a 2-mm × 2-mm QFN or 1.6-mm x 1-6-mm SOT563 package.

下載 觀看有字幕稿的影片 影片

您可能會感興趣的類似產品

open-in-new 比較替代產品
功能相同,但針腳輸出與所比較的裝置不同。
TPS62823 現行 採用 1.5-mm x 2-mm VSON-HR 封裝,具有 1% 準確度的 2.4-V 至 5.5-V 輸入、3-A 降壓轉換器 Converter with higher output voltage accuracy, higher switching frequency (2.2 MHz) in a smaller 2-mm x 1.5-mm QFN package.
功能相似於所比較的產品。
TLV62568 現行 採用 SOT23 和 SOT563 封裝的 2.5V-5.5V 輸入、1A 高效率降壓式降壓轉換器 2.5 to 5.5-Vin, 1-A converter available in SOT23 and SOT563 package.
TLV62569 現行 採用 SOT23 和 SOT563 封裝的 2.5V-5.5V 輸入、2-A 高效率降壓式降壓轉換器 2.5 to 5.5-Vin, 2-A converter available in SOT23 and SOT563 package.

設計與開發

如需其他條款或必要資源,請按一下下方的任何標題以檢視詳細頁面 (如有)。

開發板

TLV62585EVM-824 — TLV62585 3A 高效率降壓轉換器評估模組

TLV62585EVM-824 評估模組 (EVM) 的設計目的在協助使用者輕鬆評估和測試 TLV62585RWT 降壓式(降壓)轉換器的運作和功能性。EVM 可在高達 3-A 的輸出電流下,將 2.5-V 至 5.5-V 的輸入電壓轉換為 1.8V 穩壓輸出電壓。TLV62585RWT 為小型 2 x 2mm² QFN 封裝。

使用指南: PDF
支援產品和硬體
有庫存
限制:
??asset.out-of-stock-ti_zh_TW??
無法提供
開發板

TLV62585PEVM-030 — 降壓轉換器評估模組

TLV62585PEVM-030 評估模組 (EVM) 的設計目的在協助使用者輕鬆評估和測試 TLV62585XDRL 降壓式(降壓)轉換器的運作和功能性。EVM 可在高達 3-A 的輸出電流下,將 2.5-V 至 5.5-V 的輸入電壓轉換為 1.8V 穩壓輸出電壓。TLV62585XDRL 為小型 1.6 x 1.6mm² SOT-563 封裝。

使用指南: PDF
支援產品和硬體
有庫存
限制:
??asset.out-of-stock-ti_zh_TW??
無法提供
模擬型號

TLV62585 PSpice Unencrypted Transient Model (Rev. B)

SLVMC80B.ZIP (88 KB) - PSpice 模型
支援產品和硬體
模擬型號

TLV62585 SIMPLIS Transient and Average Model

SLVMDA7.ZIP (687 KB) - SIMPLIS 模型
支援產品和硬體
計算工具

SLVC780 — Design Tool for Output Voltage Adjustment Using a DAC

Calculator tool to adjust the power supply's output voltage with an analog input voltage
支援產品和硬體
封裝 針腳 CAD 符號、佔位空間與 3D 模型
SOT-5X3 (DRL) 6 Ultra Librarian
VQFN-HR (RWT) 12 Ultra Librarian

訂購與品質

建議產品可能具有與此 TI 產品相關的參數、評估模組或參考設計。

支援與培訓

內含 TI 工程師技術支援的 TI E2E™ 論壇

內容係由 TI 和社群貢獻者依「現狀」提供,且不構成 TI 規範。檢視使用條款

若有關於品質、封裝或訂購 TI 產品的問題,請參閱 TI 支援。​​​​​​​​​​​​​​

影片