首頁 電源管理 電壓參考 分流電壓參考
首頁
電源管理
電壓參考
分流電壓參考

TLVH431

現行

1.5% 低電壓寬操作電流可調整精密度分流穩壓器

立即訂購
產品規格表

TLVH431

現行
產品規格表 立即訂購

產品詳細資料

VO (V) 1.24 Initial accuracy (max) (%) 1.5 VO adj (min) (V) 1.24 VO adj (max) (V) 18 Iz for regulation (min) (µA) 60 Reference voltage (V) adjustable Rating Catalog Temp coeff (max) (ppm/°C) 138 Operating temperature range (°C) -40 to 125 Iout/Iz (max) (mA) 80
VO (V) 1.24 Initial accuracy (max) (%) 1.5 VO adj (min) (V) 1.24 VO adj (max) (V) 18 Iz for regulation (min) (µA) 60 Reference voltage (V) adjustable Rating Catalog Temp coeff (max) (ppm/°C) 138 Operating temperature range (°C) -40 to 125 Iout/Iz (max) (mA) 80
SOT-23 (DBV) 5 8.12 mm² 2.9 x 2.8 SOT-23 (DBZ) 3 6.9204 mm² 2.92 x 2.37 SOT-89 (PK) 3 18.4275 mm² 4.5 x 4.095 SOT-SC70 (DCK) 6 4.2 mm² 2 x 2.1 TO-92 (LP) 3 19.136 mm² 5.2 x 3.68
  • Low-voltage operation: down to 1.24 V
  • Reference voltage tolerances at 25°C
    • 0.5% for B grade
    • 1% for A grade
    • 1.5% for standard grade
  • Adjustable output voltage, VO = VREF to 18 V
  • Wide operating cathode current range: 100 µA to 70 mA
  • 0.25-Ω typical output impedance
  • –40°C to +125°C specifications
  • TLVH432 provides alternative pinouts for SOT-23-3 and SOT-89 packages
  • Ultra-small SC-70 package offers 40% smaller footprint than SOT-23-3
  • Low-voltage operation: down to 1.24 V
  • Reference voltage tolerances at 25°C
    • 0.5% for B grade
    • 1% for A grade
    • 1.5% for standard grade
  • Adjustable output voltage, VO = VREF to 18 V
  • Wide operating cathode current range: 100 µA to 70 mA
  • 0.25-Ω typical output impedance
  • –40°C to +125°C specifications
  • TLVH432 provides alternative pinouts for SOT-23-3 and SOT-89 packages
  • Ultra-small SC-70 package offers 40% smaller footprint than SOT-23-3

The TLVH431 and TLVH432 devices are low-voltage 3-terminal adjustable voltage references, with specified thermal stability over applicable industrial and commercial temperature ranges. Output voltage can be set to any value between VREF (1.24 V) and 18 V with two external resistors (see Figure 7-2). These devices operate from a lower voltage (1.24 V) than the widely used TL431 and TL1431 shunt-regulator references.

When used with an optocoupler, the TLVH431 and TLVH432 devices are ideal voltage references in isolated feedback circuits for 3-V to 3.3-V switching-mode power supplies. They have a typical output impedance of 0.25 Ω. Active output circuitry provides a very sharp turn-on characteristic, making the TLVH431 and TLVH432 devices excellent replacements for low-voltage Zener diodes in many applications, including on-board regulation and adjustable power supplies.

The TLVH432 device is identical to the TLVH431 device, but is offered with different pinouts for the 3-pin SOT-23 and SOT-89 packages.

The TLVH431 and TLVH432 devices are low-voltage 3-terminal adjustable voltage references, with specified thermal stability over applicable industrial and commercial temperature ranges. Output voltage can be set to any value between VREF (1.24 V) and 18 V with two external resistors (see Figure 7-2). These devices operate from a lower voltage (1.24 V) than the widely used TL431 and TL1431 shunt-regulator references.

When used with an optocoupler, the TLVH431 and TLVH432 devices are ideal voltage references in isolated feedback circuits for 3-V to 3.3-V switching-mode power supplies. They have a typical output impedance of 0.25 Ω. Active output circuitry provides a very sharp turn-on characteristic, making the TLVH431 and TLVH432 devices excellent replacements for low-voltage Zener diodes in many applications, including on-board regulation and adjustable power supplies.

The TLVH432 device is identical to the TLVH431 device, but is offered with different pinouts for the 3-pin SOT-23 and SOT-89 packages.
open-in-new 尋找其它 分流電壓參考
下載 觀看有字幕稿的影片 影片

技術文件

star =TI 所選的此產品重要文件
找不到結果。請清除您的搜尋條件，然後再試一次。
檢視所有 9
類型 標題 日期
* Data sheet TLVH431, TLVH432 Low-Voltage Adjustable Precision Shunt Regulators datasheet (Rev. M) PDF | HTML 2023年 1月 26日
E-book Tips and tricks for designing with voltage references (Rev. A) 2021年 5月 7日
Application note Using the TL431 for Undervoltage and Overvoltage Detection (Rev. A) 2019年 12月 11日
Selection guide 431 Device Nomenclature (Rev. B) 2019年 9月 18日
E-book Voltage Supervisor and Reset ICs: Tips, Tricks and Basics 2019年 6月 28日
Technical article Designing for isolated DC/DC converter shunt safety PDF | HTML 2015年 8月 29日
Application note Designing Overcurrent protection for TPL7407L Peripheral Driver 2014年 11月 5日
Application note Setting the shunt voltage on an adjustable shunt regulator 2011年 9月 1日
More literature SLL Precision Reference Product Clip 2006年 2月 23日

設計與開發

如需其他條款或必要資源，請按一下下方的任何標題以檢視詳細頁面 (如有)。

開發板

UCC25640EVM-020 — UCC25640x 半橋 LLC 評估模組

UCC25640EVM-020 is a 180W, LLC resonant converter using UCC256404. This EVM accepts DC input from 360V to 410V, AC input voltage from 85VAC to 264VAC and outputs 12VDC with 180W full load output power.
使用指南: PDF
TI.com 無法提供
開發板

BEAGLE-3P-BBONE-AI — 適用於嵌入式人工智慧的 BeagleBone® AI AM5729 開發板

What is BeagleBone® AI?

Built on the proven BeagleBoard.org® open source Linux approach, BeagleBone® AI fills the gap between small SBCs and more powerful industrial computers. Based on the Texas Instruments, Sitara™ AM5729 processor, developers have access to a highly integrated and (...)

來源：BeagleBoard.org Foundation
使用指南: PDF
造訪合作夥伴網站
模擬型號

TLVH431 PSpice Transient Model

SLVM672.ZIP (19 KB) - PSpice Model
下載
模擬型號

TLVH431 TINA-TI AC Reference Design

SLIM269.TSC (80 KB) - TINA-TI Reference Design
下載
模擬型號

TLVH431 TINA-TI Transient Reference Design

SLIM268.TSC (45 KB) - TINA-TI Reference Design
下載
模擬型號

TLVH431 TINA-TI Transient Spice Model

SLIM270.TSM (3 KB) - TINA-TI Spice Model
下載
模擬工具

PSPICE-FOR-TI — PSpice® for TI 設計與模擬工具

PSpice® for TI is a design and simulation environment that helps evaluate functionality of analog circuits. This full-featured, design and simulation suite uses an analog analysis engine from Cadence®. Available at no cost, PSpice for TI includes one of the largest model libraries in the (...)
要求
參考設計

TIDEP-0075 — 工業通訊閘道 PROFINET IRT 轉 PROFIBUS 主站參考設計

PROFINET is becoming the leading industrial Ethernet protocol in automation due to its high-speed, deterministic communications and enterprise connectivity. However, as the world’s most popular fieldbus, PROFIBUS’s importance and usage will continue for many years due to legacy (...)
Design guide: PDF
電路圖: PDF
參考設計

TIDEP0078 — 適用於 AM572x 的 OPC UA 資料存取伺服器參考設計

OPC UA is an industrial machine-to-machine protocol designed to allow interoperability and communication between all machines connected under Industry 4.0. This reference design demonstrates use of the Matrikon OPC™ OPC UA server development kit (SDK) to allow communications using an OPC UA (...)
Design guide: PDF
電路圖: PDF
參考設計

PMP10709 — 適用於 A13 車用無線充電器發送器的系統級電源參考設計

PMP10709 is a system optimized 50 W power designs for A13 Wireless Charger Transmitter used in automotive system. The design has various front end automotive protections such as Load dump through TVS (ISO pulse testing), Reverse Voltage (Through PFET’s body diode), Battery Disconnect Switch (...)
Test report: PDF
電路圖: PDF
封裝 引腳 下載
SOT-23 (DBV) 5 檢視選項
SOT-23 (DBZ) 3 檢視選項
SOT-89 (PK) 3 檢視選項
SOT-SC70 (DCK) 6 檢視選項
TO-92 (LP) 3 檢視選項
適用 TI 的評估品項標準條款與條件。

訂購與品質

內含資訊：
  • RoHS
  • REACH
  • 產品標記
  • 鉛塗層/球物料
  • MSL 等級/回焊峰值
  • MTBF/FIT 估算值
  • 材料內容
  • 資格摘要
  • 進行中可靠性監測
內含資訊：
  • 晶圓廠位置
  • 組裝地點

支援與培訓

內含 TI 工程師技術支援的 TI E2E™ 論壇

以英文檢視所有論壇主題

內容係由 TI 和社群貢獻者依「現狀」提供，且不構成 TI 規範。檢視使用條款。

若有關於品質、封裝或訂購 TI 產品的問題，請參閱 TI 支援。​​​​​​​​​​​​​​

影片