首頁 電源管理 電源開關 高壓側開關
首頁
電源管理
電源開關
高壓側開關
最新

TPS1HTC30-Q1

現行

具有可調整電流限制的車用、60-V、6-A、30-mΩ、單通道智慧型高壓側開關

立即訂購
產品規格表

TPS1HTC30-Q1

現行
產品規格表 立即訂購

產品詳細資料

Number of channels 1 Operating voltage (max) (V) 60 Operating voltage (min) (V) 6 Ron (typ) (mΩ) 30 Imax (A) 6 Current limit (min) (A) 2 Current limit (max) (A) 16 Current limit type Adjustable Current limit accuracy +20/-20% Current sense accuracy +/-4% @ 1A FET Internal Features Adjustable current limit, Automotive load dump, Current sense output, Fault reporting, Inductive load, Inrush current control, Short circuit protection, Thermal shutdown, Under voltage lock out Operating temperature range (°C) -40 to 125 Function Adjustable current limit, Automotive load dump compatibility, Current monitoring, Inductive load compatibility, Inrush current control, Short circuit protection, Thermal shutdown Rating Automotive
Number of channels 1 Operating voltage (max) (V) 60 Operating voltage (min) (V) 6 Ron (typ) (mΩ) 30 Imax (A) 6 Current limit (min) (A) 2 Current limit (max) (A) 16 Current limit type Adjustable Current limit accuracy +20/-20% Current sense accuracy +/-4% @ 1A FET Internal Features Adjustable current limit, Automotive load dump, Current sense output, Fault reporting, Inductive load, Inrush current control, Short circuit protection, Thermal shutdown, Under voltage lock out Operating temperature range (°C) -40 to 125 Function Adjustable current limit, Automotive load dump compatibility, Current monitoring, Inductive load compatibility, Inrush current control, Short circuit protection, Thermal shutdown Rating Automotive
HTSSOP (PWP) 14 32 mm² 5 x 6.4
  • Single-channel smart high-side power switch for 24-V automotive systems with full diagnostics
  • Wide operating voltage range: 6 V to 60 V
    • OVP protection: 66 V
  • Low R ON: 30-mΩ typical, 55-mΩ maximum
  • Low standby current: < 0.5 µA
  • Low quiescent current (Iq): < 2 mA
  • Improve system level reliability through adjustable current limiting
    • Current limit: 2 A –16 A
  • Accurate current sensing: ±4% at 1 A
  • Protection
    • Overload and short-circuit protection
    • Integrated inductive discharge clamp
    • Undervoltage lockout (UVLO) protection
    • Loss of GND, loss of supply protection
    • Reverse battery protection with external components
  • Diagnostics
    • On and off state output open-load and short-to-battery detection
    • Overload and short to ground detection
    • Absolute and relative thermal shutdown detection
  • Functional Safety-Capable
  • Operating junction temperature: –40 to 125°C
  • Input control: 1.8-V, 3.3-V and 5-V logic compatible
  • Integrated fault sense voltage scaling for ADC protection
  • Qualifications
    • AEC-Q100 qualified for automotive applications
      • Temperature grade 1: –40°C to +125°C, T A
  • 14-pin thermally-enhanced TSSOP package
  • Single-channel smart high-side power switch for 24-V automotive systems with full diagnostics
  • Wide operating voltage range: 6 V to 60 V
    • OVP protection: 66 V
  • Low R ON: 30-mΩ typical, 55-mΩ maximum
  • Low standby current: < 0.5 µA
  • Low quiescent current (Iq): < 2 mA
  • Improve system level reliability through adjustable current limiting
    • Current limit: 2 A –16 A
  • Accurate current sensing: ±4% at 1 A
  • Protection
    • Overload and short-circuit protection
    • Integrated inductive discharge clamp
    • Undervoltage lockout (UVLO) protection
    • Loss of GND, loss of supply protection
    • Reverse battery protection with external components
  • Diagnostics
    • On and off state output open-load and short-to-battery detection
    • Overload and short to ground detection
    • Absolute and relative thermal shutdown detection
  • Functional Safety-Capable
  • Operating junction temperature: –40 to 125°C
  • Input control: 1.8-V, 3.3-V and 5-V logic compatible
  • Integrated fault sense voltage scaling for ADC protection
  • Qualifications
    • AEC-Q100 qualified for automotive applications
      • Temperature grade 1: –40°C to +125°C, T A
  • 14-pin thermally-enhanced TSSOP package

TPS1HTC30-Q1 is a single-channel, smart high-side switch, with integrated NMOS power FET and charge pump, designed to meet the requirements of 24-V automotive battery systems. The low R ON(30 mΩ) minimizes device power dissipation driving a wide range of output load current up to 6-A DC, and the 60-V DC operating range improves system robustness.

The device integrates protection features such as thermal shutdown, output clamp, and current limit. These features improve system robustness during fault events such as short circuit. TPS1HTC30-Q1 implements an adjustable current limiting circuit that improves the reliability of the system by reducing inrush current when driving large capacitive loads and minimizing overload current. The device also provides an accurate load current sense that allows for improved load diagnostics such as overload and open-load detection enabling better predictive maintenance.

TPS1HTC30-Q1 is available in a small 14-pin, 4.40-mm × 5.0-mm HTSSOP leaded package with 0.65-mm pin pitch minimizing the PCB footprint.

TPS1HTC30-Q1 is a single-channel, smart high-side switch, with integrated NMOS power FET and charge pump, designed to meet the requirements of 24-V automotive battery systems. The low R ON(30 mΩ) minimizes device power dissipation driving a wide range of output load current up to 6-A DC, and the 60-V DC operating range improves system robustness.

The device integrates protection features such as thermal shutdown, output clamp, and current limit. These features improve system robustness during fault events such as short circuit. TPS1HTC30-Q1 implements an adjustable current limiting circuit that improves the reliability of the system by reducing inrush current when driving large capacitive loads and minimizing overload current. The device also provides an accurate load current sense that allows for improved load diagnostics such as overload and open-load detection enabling better predictive maintenance.

TPS1HTC30-Q1 is available in a small 14-pin, 4.40-mm × 5.0-mm HTSSOP leaded package with 0.65-mm pin pitch minimizing the PCB footprint.
open-in-new 尋找其它 高壓側開關
下載 觀看有字幕稿的影片 影片

您可能會感興趣的類似產品

open-in-new 比較替代產品
功能相似於所比較的產品
TPS281C30 現行 60-V 容限、30-mΩ 6-A 單通道高壓側開關 60-V tolerant high-side switch

技術文件

star =TI 所選的此產品重要文件
找不到結果。請清除您的搜尋條件，然後再試一次。
檢視所有 4
類型 標題 日期
* Data sheet TPS1HTC30-Q1, 30-mΩ, 6-A Single-Channel Automotive Smart High-Side Switch datasheet PDF | HTML 2023年 9月 21日
Functional safety information TPS1HTC30-Q1 Functional Safety, FIT Rate, Failure Mode Distribution and Pin FMA PDF | HTML 2024年 2月 9日
EVM User's guide TPS1HTC30-Q1 Evaluation Module User's Guide PDF | HTML 2023年 8月 2日
Certificate TPS1HTC30EVM EU Declaration of Conformity (DoC) 2023年 6月 21日

設計與開發

如需其他條款或必要資源，請按一下下方的任何標題以檢視詳細頁面 (如有)。

開發板

TPS1HTC30EVM — 適用於 60-V、30-mΩ、6-A 單通道智慧型高壓側開關的 TPS1HTC30-Q1 評估模組

TPS1HTC30EVM 是硬體評估模組 (EVM)，可用於讓硬體工程師評估 TPS1HTC30-Q1 車用高壓側開關的完整性能與功能。此評估板提供可順暢地將電源供應器連接至 TPS1HTC30-Q1 輸入、將負載連接至輸出通道的方式，以及可順暢使用晶片本身的控制針腳來開啟和關閉裝置的方式。此裝置整合了過熱關機、輸出箝位與電流限制等保護功能。

使用指南: PDF | HTML
TI.com 無法提供
模擬工具

PSPICE-FOR-TI — PSpice® for TI 設計與模擬工具

PSpice® for TI is a design and simulation environment that helps evaluate functionality of analog circuits. This full-featured, design and simulation suite uses an analog analysis engine from Cadence®. Available at no cost, PSpice for TI includes one of the largest model libraries in the (...)
要求
參考設計

TIDA-020060 — 適用於 100/1000Base-T1 乙太網路應用的汽車數據線供電參考設計

此參考設計展現出汽車應用實例的數據線供電 (PoDL) 實作。此設計使用 DP83TG720S-Q1 1000MBit/s 單對乙太網路 (SPE) PHY，並可選擇切換至 DP83TC812S-Q1 SPE PHY 以進行 100MBit/s 運作。耦合和去耦合網路用於在 50W 的最大功率下耦合。
Design guide: PDF
封裝 引腳 下載
HTSSOP (PWP) 14 檢視選項
適用 TI 的評估品項標準條款與條件。

訂購與品質

內含資訊：
  • RoHS
  • REACH
  • 產品標記
  • 鉛塗層/球物料
  • MSL 等級/回焊峰值
  • MTBF/FIT 估算值
  • 材料內容
  • 資格摘要
  • 進行中可靠性監測
內含資訊：
  • 晶圓廠位置
  • 組裝地點

建議產品可能具有與此 TI 產品相關的參數、評估模組或參考設計。

支援與培訓

內含 TI 工程師技術支援的 TI E2E™ 論壇

以英文檢視所有論壇主題

內容係由 TI 和社群貢獻者依「現狀」提供，且不構成 TI 規範。檢視使用條款。

若有關於品質、封裝或訂購 TI 產品的問題，請參閱 TI 支援。​​​​​​​​​​​​​​

影片