首頁 電源管理 USB 電源開關與充電埠控制器
首頁
電源管理
USB 電源開關與充電埠控制器

TPS2553

現行

0.075-1.7A 可調整ILIMIT、2.5-6.5V、85mΩ USB 電源開關、高電位作動、反向阻斷

立即訂購
產品規格表

TPS2553

現行
產品規格表 立即訂購

產品詳細資料

Product type Adjustable current limit, Power switch Vin (min) (V) 2.5 Vin (max) (V) 6.5 Continuous current (max) (A) 1.5 Current limit (A) 0.075 to 1.7 Operating temperature range (°C) -40 to 125 Enable Active High Number of switches 1 Current limit accuracy at 1 A 7.5% (925mA min / 1075mA max) Rating Catalog
Product type Adjustable current limit, Power switch Vin (min) (V) 2.5 Vin (max) (V) 6.5 Continuous current (max) (A) 1.5 Current limit (A) 0.075 to 1.7 Operating temperature range (°C) -40 to 125 Enable Active High Number of switches 1 Current limit accuracy at 1 A 7.5% (925mA min / 1075mA max) Rating Catalog
SOT-23 (DBV) 6 8.12 mm² 2.9 x 2.8 WSON (DRV) 6 4 mm² 2 x 2
  • Up to 1.5-A Maximum Load Current
  • ±6% Current-Limit Accuracy at 1.7 A (Typical)
  • Meets USB Current-Limiting Requirements
  • Backwards Compatible With TPS2550 and TPS2551
  • Adjustable Current Limit: 75 mA to 1700 mA (Typical)
  • Constant-Current (TPS255x) and Latch-Off (TPS255x-1) Versions
  • Fast Overcurrent Response - 2 µs (Typical)
  • 85-mΩ High-Side MOSFET (DBV Package)
  • Reverse Input-Output Voltage Protection
  • Operating Range: 2.5 V to 6.5 V
  • Built-In Soft Start
  • 15-kV ESD Protection per IEC 61000-4-2 (With External Capacitance)
  • UL Listed – File No. E169910 and NEMKO IEC60950-1-am1 ed2.0
  • See the TI Switch Portfolio
  • Up to 1.5-A Maximum Load Current
  • ±6% Current-Limit Accuracy at 1.7 A (Typical)
  • Meets USB Current-Limiting Requirements
  • Backwards Compatible With TPS2550 and TPS2551
  • Adjustable Current Limit: 75 mA to 1700 mA (Typical)
  • Constant-Current (TPS255x) and Latch-Off (TPS255x-1) Versions
  • Fast Overcurrent Response - 2 µs (Typical)
  • 85-mΩ High-Side MOSFET (DBV Package)
  • Reverse Input-Output Voltage Protection
  • Operating Range: 2.5 V to 6.5 V
  • Built-In Soft Start
  • 15-kV ESD Protection per IEC 61000-4-2 (With External Capacitance)
  • UL Listed – File No. E169910 and NEMKO IEC60950-1-am1 ed2.0
  • See the TI Switch Portfolio

The TPS255x and TPS255x-1 power-distribution switches are intended for applications where precision current limiting is required or heavy capacitive loads and short circuits are encountered and provide up to 1.5 A of continuous load current. These devices offer a programmable current-limit threshold between 75 mA and 1.7 A (typical) through an external resistor. Current-limit accuracy as tight as ±6% can be achieved at the higher current-limit settings. The power-switch rise and fall times are controlled to minimize current surges during turnon and turnoff.

TPS255x devices limit the output current to a safe level by using a constant-current mode when the output load exceeds the current-limit threshold. TPS255x-1 devices provide circuit breaker functionality by latching off the power switch during overcurrent or reverse-voltage situations. An internal reverse-voltage comparator disables the power-switch when the output voltage is driven higher than the input to protect devices on the input side of the switch. The FAULT output asserts low during overcurrent and reverse-voltage conditions.

The TPS255x and TPS255x-1 power-distribution switches are intended for applications where precision current limiting is required or heavy capacitive loads and short circuits are encountered and provide up to 1.5 A of continuous load current. These devices offer a programmable current-limit threshold between 75 mA and 1.7 A (typical) through an external resistor. Current-limit accuracy as tight as ±6% can be achieved at the higher current-limit settings. The power-switch rise and fall times are controlled to minimize current surges during turnon and turnoff.

TPS255x devices limit the output current to a safe level by using a constant-current mode when the output load exceeds the current-limit threshold. TPS255x-1 devices provide circuit breaker functionality by latching off the power switch during overcurrent or reverse-voltage situations. An internal reverse-voltage comparator disables the power-switch when the output voltage is driven higher than the input to protect devices on the input side of the switch. The FAULT output asserts low during overcurrent and reverse-voltage conditions.
open-in-new 尋找其它 USB 電源開關與充電埠控制器
下載 觀看有字幕稿的影片 影片

您可能會感興趣的類似產品

open-in-new 比較替代產品
引腳對引腳的功能與所比較的產品相同
TPS25221 現行 0.275-2.7A 可調整ILIMIT、2.5-5.5V、70mΩ USB 電源開關、高電位作動、反向阻斷 This product features 0.275-A to 2.7-A adjustable current limit, 70-mΩ RDS(on) and lower 1 ku price.

技術文件

star =TI 所選的此產品重要文件
找不到結果。請清除您的搜尋條件，然後再試一次。
檢視所有 5
類型 標題 日期
* Data sheet TPS255xx Precision Adjustable Current-Limited Power-Distribution Switches datasheet (Rev. F) PDF | HTML 2014年 8月 15日
Certificate TPS2553 UL Certificate of Compliance IEC 62368-1 2020年 9月 7日
Selection guide Power Management Guide 2018 (Rev. R) 2018年 6月 25日
Design guide 2-Port USB 3.0 Hub (TIDA-00287) 2014年 8月 1日
User guide Power-Distribution Switch with Adjustable Current-Limit EVM 2008年 10月 8日

設計與開發

如需其他條款或必要資源，請按一下下方的任何標題以檢視詳細頁面 (如有)。

開發板

TPS2553DBVEVM-364 — 適用於 TPS2553DBVEVM-364 且含可調整限流的配電開關評估模組

The TPS2552/3DBVEVM and TPS2552/3DRVEVM are evaluation modules (EVM) for Texas Instruments’family of power-distribution switches with adjustable current-limit. These EVMs operate over a 2.5 V to 6.5 V range. An onboard jumper sets the output current-limit to either 0.5 A or (...)

使用指南: PDF
TI.com 無法提供
開發板

TPS2553DRVEVM-364 — 適用於 TPS2553DRVEVM-364 且含可調整限流的配電開關評估模組

The TPS2552/3DBVEVM and TPS2552/3DRVEVM are evaluation modules (EVM) for Texas Instruments’family of power-distribution switches with adjustable current-limit. These EVMs operate over a 2.5 V to 6.5 V range. An onboard jumper sets the output current-limit to either 0.5 A or (...)

使用指南: PDF
TI.com 無法提供
模擬型號

TPS2553 TINA-TI Transient Reference Design

SLVM869.TSC (140 KB) - TINA-TI Reference Design
下載
模擬型號

TPS2553 TINA-TI Transient Spice Model

SLVM868.ZIP (43 KB) - TINA-TI Spice Model
下載
模擬型號

TPS2553 Unencrypted PSpice Transient Model Package (Rev. B)

SLVM425B.ZIP (47 KB) - PSpice Model
下載
計算工具

TPS255X-CURRENT-LIMIT-CALC — Current-Limit Calculator

支援產品和硬體

支援產品和硬體

產品
USB 電源開關與充電埠控制器
TPS2552 — 0.075-1.7A 可調整ILIMIT、2.5-6.5V、85mΩ USB 電源開關、低電位作動、反向阻斷 TPS2552-1 — 0.075-1.7A 可調整ILIMIT、2.5-6.5V、85mΩ USB 電源開關、低電位作動、閉鎖、反向阻斷 TPS2553 — 0.075-1.7A 可調整ILIMIT、2.5-6.5V、85mΩ USB 電源開關、高電位作動、反向阻斷 TPS2553-1 — 0.075-1.7A 可調整ILIMIT、2.5-6.5V、85mΩ USB 電源開關、高電位作動、閉鎖、反向阻斷
下載
參考設計

TIDA-010008 — 適合於電網應用之瞬態保護的平箝制 TVS 架構參考設計

This reference design features multiple approaches for  protecting AC or DC analog input, DC analog output, AC or DC binary input, digital output with a high side or low side driver, LCD bias supply, USB interfaces (power and data) and onboard power supplies with 24, 12 or 5V input used in (...)
Design guide: PDF
電路圖: PDF
參考設計

TIDM-HAHSCPTO — 高可用性高速計數器 (HSC) 和脈衝串輸出 (PTO) 參考設計

This reference design provides firmware and test platform for two different industrial input/output functions related to motion control: high-speed counter (HSC) and pulse-train output (PTO). The design is based on a microcontroller platform that is suitable for use in industrial applications (...)
Design guide: PDF
電路圖: PDF
參考設計

TIDA-00287 — 雙埠 USB 3.0 集線器參考設計

This verified reference design is a two-port, USB 3.0 compliant hub.  It provides simultaneous SuperSpeed and high-speed/full-speed connections on the upstream port and provides SuperSpeed, high-speed, full-speed, or low-speed connections on the downstream ports.

The hub design provides power (...)

Design guide: PDF
電路圖: PDF
封裝 引腳 下載
SOT-23 (DBV) 6 檢視選項
WSON (DRV) 6 檢視選項
適用 TI 的評估品項標準條款與條件。

訂購與品質

內含資訊：
  • RoHS
  • REACH
  • 產品標記
  • 鉛塗層/球物料
  • MSL 等級/回焊峰值
  • MTBF/FIT 估算值
  • 材料內容
  • 資格摘要
  • 進行中可靠性監測
內含資訊：
  • 晶圓廠位置
  • 組裝地點

支援與培訓

內含 TI 工程師技術支援的 TI E2E™ 論壇

以英文檢視所有論壇主題

內容係由 TI 和社群貢獻者依「現狀」提供，且不構成 TI 規範。檢視使用條款。

若有關於品質、封裝或訂購 TI 產品的問題，請參閱 TI 支援。​​​​​​​​​​​​​​

影片