首頁 電源管理 電源保護開關與控制器 eFuse(整合式熱插拔)

TPS25982

現行

具有熱插拔保護和可調整故障管理功能、±1.5% 電流監控器的 2.7V 至 24V、2.7mΩ、15A eFuse

現在提供此產品的更新版本

open-in-new 比較替代產品
針腳對針腳的功能與所比較的裝置相同。
TPS25983 現行 具電流監控器和阻斷 FET 驅動器的 2.7V 至 26V、2.7mΩ 20A 堆疊式熱插拔 eFuse Supports higher current and higher voltage

TPS25982

現行

產品詳細資料

Vabsmax_cont (V) 30 Vin (max) (V) 24 Vin (min) (V) 2.7 Current limit (max) (A) 15 Current limit (min) (A) 2 Features Adjustable current limit, Adjustable soft start, Current monitoring, Fault output, Overcurrent protection, Overvoltage protection, Power good signal, Short-circuit protection, Thermal shutdown, adjustable UVLO UL recognition IEC62368, UL2367 Overcurrent response Circuit breaker, Current limiting Fault response Auto-retry, Latch-off Ron (typ) (mΩ) 2.7 Overvoltage response Cut-off Rating Catalog Soft start Adjustable Quiescent current (Iq) (typ) (A) 0.0008 Quiescent current (Iq) (max) (A) 0.0012 Device type eFuses and hot swap controllers Operating temperature range (°C) -40 to 125
Vabsmax_cont (V) 30 Vin (max) (V) 24 Vin (min) (V) 2.7 Current limit (max) (A) 15 Current limit (min) (A) 2 Features Adjustable current limit, Adjustable soft start, Current monitoring, Fault output, Overcurrent protection, Overvoltage protection, Power good signal, Short-circuit protection, Thermal shutdown, adjustable UVLO UL recognition IEC62368, UL2367 Overcurrent response Circuit breaker, Current limiting Fault response Auto-retry, Latch-off Ron (typ) (mΩ) 2.7 Overvoltage response Cut-off Rating Catalog Soft start Adjustable Quiescent current (Iq) (typ) (A) 0.0008 Quiescent current (Iq) (max) (A) 0.0012 Device type eFuses and hot swap controllers Operating temperature range (°C) -40 to 125
VQFN (RGE) 24 16 mm² (4 mm × 4 mm)
  • Wide input voltage range: 2.7V to 24V
    • 30V absolute maximum
  • Low On-Resistance: RON = 2.7mΩ typical
  • Adjustable current limit threshold
    • Range: 2A to 15A
    • Accuracy: ± 8% (typical for ILIM > 5A)
  • Circuit breaker and current limiter options
  • Adjustable over-current blanking timer
    • Handles load transients without tripping
  • Accurate current monitor output
    • ± 1.5% (typical at 25°C for IOUT > 3A)
  • User configurable fault response
    • Latch-off or auto-retry
    • Number of retries (Finite or indefinite)
    • Delay between retries
  • Robust short-circuit protection
    • Fast-trip response time < 400ns typical
    • Tested against 1 million power-into-short events
    • Immune to line transients - no nuisance tripping
  • Adjustable output slew rate (dVdt) control
  • Adjustable undervoltage lockout
  • Overvoltage lockout (Fixed 3.7V, 7.6V, 16.9V and no-OVLO options)
  • Integrated overtemperature protection
  • Power good indication
  • Adjustable load detect and handshake timer
  • UL 2367 Recognition
    • File no. E339631
    • RILIM ≥ 182Ω
  • IEC 62368 CB Certification
  • Small footprint: 4mm × 4mm QFN package
  • Wide input voltage range: 2.7V to 24V
    • 30V absolute maximum
  • Low On-Resistance: RON = 2.7mΩ typical
  • Adjustable current limit threshold
    • Range: 2A to 15A
    • Accuracy: ± 8% (typical for ILIM > 5A)
  • Circuit breaker and current limiter options
  • Adjustable over-current blanking timer
    • Handles load transients without tripping
  • Accurate current monitor output
    • ± 1.5% (typical at 25°C for IOUT > 3A)
  • User configurable fault response
    • Latch-off or auto-retry
    • Number of retries (Finite or indefinite)
    • Delay between retries
  • Robust short-circuit protection
    • Fast-trip response time < 400ns typical
    • Tested against 1 million power-into-short events
    • Immune to line transients - no nuisance tripping
  • Adjustable output slew rate (dVdt) control
  • Adjustable undervoltage lockout
  • Overvoltage lockout (Fixed 3.7V, 7.6V, 16.9V and no-OVLO options)
  • Integrated overtemperature protection
  • Power good indication
  • Adjustable load detect and handshake timer
  • UL 2367 Recognition
    • File no. E339631
    • RILIM ≥ 182Ω
  • IEC 62368 CB Certification
  • Small footprint: 4mm × 4mm QFN package

The TPS25982 family of eFuses is a highly integrated circuit protection and power management solution in a small package. The devices are operational over a wide input voltage range. A single part caters to low-voltage systems needing minimal I*R voltage drop as well as higher voltage, high current systems needing low power dissipation. They are a robust defense against overloads, short-circuits, voltage surges and excessive inrush current.

Overvoltage events are limited by internal cutoff circuits, with multiple device options to select the overvoltage threshold.

Multiple device options exist to select between the response to overcurrent conditions, circuit breaker or active current limiter. The overcurrent limit and fast-trip (short-circuit) threshold can be set with one external resistor. The devices intelligently manage the overcurrent response by distinguishing between transient events and actual faults, thereby allowing the system to function uninterrupted during line and load transients without compromising on the robustness of the protection against faults. The device can be configured to stay latched off or retry automatically after a fault shutdown. The number of auto-retries as well as the retry delay are configurable with capacitors. This enables remote systems to automatically recover from temporary faults while ensuring that power supplies are not stressed indefinitely due to a persistent fault.

The TPS25982 devices are available in a small 4mm × 4mm QFN package. The devices are characterized for operation over a junction temperature range from –15°C to 125°C.

The TPS25982 family of eFuses is a highly integrated circuit protection and power management solution in a small package. The devices are operational over a wide input voltage range. A single part caters to low-voltage systems needing minimal I*R voltage drop as well as higher voltage, high current systems needing low power dissipation. They are a robust defense against overloads, short-circuits, voltage surges and excessive inrush current.

Overvoltage events are limited by internal cutoff circuits, with multiple device options to select the overvoltage threshold.

Multiple device options exist to select between the response to overcurrent conditions, circuit breaker or active current limiter. The overcurrent limit and fast-trip (short-circuit) threshold can be set with one external resistor. The devices intelligently manage the overcurrent response by distinguishing between transient events and actual faults, thereby allowing the system to function uninterrupted during line and load transients without compromising on the robustness of the protection against faults. The device can be configured to stay latched off or retry automatically after a fault shutdown. The number of auto-retries as well as the retry delay are configurable with capacitors. This enables remote systems to automatically recover from temporary faults while ensuring that power supplies are not stressed indefinitely due to a persistent fault.

The TPS25982 devices are available in a small 4mm × 4mm QFN package. The devices are characterized for operation over a junction temperature range from –15°C to 125°C.

下載 觀看有字幕稿的影片 影片

您可能會感興趣的類似產品

open-in-new 比較替代產品
針腳對針腳的功能與所比較的裝置相同。
TPS25980 現行 具可調式瞬態故障管理的 2.7-V 至 24-V、8-A、3-mΩ 智慧型 eFuse Footprint compatible eFuse with 15-A rating and 1.5% current monitor accuracy
功能相同,但針腳輸出與所比較的裝置不同。
TPS25990 現行 具備數位遙測控制器的 2.9-V 至 16-V、0.79-mΩ、60-A eFuse Much higher current, higher current density, better accuracy, stackable and PMBUS
TPS25981 現行 具有瞬態過流消隱定時器的 2.7-V 至 16-V、10-A、6-mΩ eFuse eFuse with smaller package option.
TPS25985 現行 具有精確和快速電流監視器的 4.5-V 至 16-V、0.59-mΩ、80-A 堆疊式精巧 eFuse eFuse with much higher current, higher current density, better accuracy and stackable.

設計與開發

如需其他條款或必要資源,請按一下下方的任何標題以檢視詳細頁面 (如有)。

開發板

TPS259824OEVM — TPS259824O eFuse 評估模組

TPS259824OEVM 可對 TI TPS259824O eFuse 進行參考電路評估。TPS259824O 裝置為一款 2.7 V 至 24 V 15A eFuse,具整合式 3mOhm FET、可編程欠電壓、過電流、突波電流保護及可配置自動重試次數和重試延遲功能。

使用指南: PDF
支援產品和硬體
有庫存
限制:
??asset.out-of-stock-ti_zh_TW??
無法提供
開發板

TPS259827LEVM — TPS259827L eFuse 評估模組

TPS259827LEVM 可對 TI TPS259827L eFuse 進行參考電路評估。TPS259827L 裝置為一款 2.7 V 至 24 V 15A eFuse,具整合式 3mOhm FET、可編程欠電壓、過電流、突波電流保護及可配置自動重試次數和重試延遲功能。

使用指南: PDF
支援產品和硬體
有庫存
限制:
??asset.out-of-stock-ti_zh_TW??
無法提供
模擬型號

TPS259822L PSPICE TRANSIENT MODEL

SLVMD21.ZIP (178 KB) - PSpice 模型
支援產品和硬體
模擬型號

TPS259822O PSPICE TRANSIENT MODEL

SLVMD20.ZIP (179 KB) - PSpice 模型
支援產品和硬體
模擬型號

TPS259823L PSPICE TRANSIENT MODEL

SLVMD23.ZIP (178 KB) - PSpice 模型
支援產品和硬體
模擬型號

TPS259823O PSPICE TRANSIENT MODEL

SLVMD22.ZIP (178 KB) - PSpice 模型
支援產品和硬體
模擬型號

TPS259824L PSpice Transient Model

SLVMD36.ZIP (175 KB) - PSpice 模型
支援產品和硬體
模擬型號

TPS259824O PSpice Transient Model

SLVMD37.ZIP (177 KB) - PSpice 模型
支援產品和硬體
模擬型號

TPS259827L PSpice Transient Model (Rev. A)

SLVMD38A.ZIP (203 KB) - PSpice 模型
支援產品和硬體
模擬型號

TPS259827LNRGE TINA-TI Transient Model

SLVMDC8.TSC (315 KB) - TINA-TI Spice 模型
支援產品和硬體
模擬型號

TPS259827O PSpice Transient Model

SLVMD39.ZIP (168 KB) - PSpice 模型
支援產品和硬體
計算工具

SLVC779 — TPS25982xx Design Calculator

支援產品和硬體
計算工具

TVS-RECOMMENDATION-CALC — TVS diode recommendation tool

This tool suggests suitable TVS for given system parameters and abs max voltage rating of the device.
支援產品和硬體
封裝 針腳 CAD 符號、佔位空間與 3D 模型
VQFN (RGE) 24 Ultra Librarian

訂購與品質

建議產品可能具有與此 TI 產品相關的參數、評估模組或參考設計。

支援與培訓

內含 TI 工程師技術支援的 TI E2E™ 論壇

內容係由 TI 和社群貢獻者依「現狀」提供,且不構成 TI 規範。檢視使用條款

若有關於品質、封裝或訂購 TI 產品的問題,請參閱 TI 支援。​​​​​​​​​​​​​​

影片