TPS481HS04-Q1
- AEC-Q100 qualified for automotive applications
- Temperature grade 1: –40°C to 125°C
- Withstands 70V load dump
- Single channel SPI controlled smart high-side switch with integrated nFET.
- Integrated wire-harness protection without MCU involvement and a SPI programmable fuse curve
- Protection against persistent overload condition
- User programmable EEPROM
- Improve system level reliability through SPI programmable adjustable overcurrent protection
- SPI configurable capacitive charging mode to drive a wide range of capacitive input ECUs load current needs.
- Low quiescent current, low power ON-state to supply always-ON loads with automatic wake on load current increase with wake signal to MCU
- Robust integrated output protection:
- Integrated thermal protection
- Protection against short-to-ground
- Protection against reverse battery events including automatic switch on of FET with reverse supply voltage
- Automatic shut off on loss of battery and ground
- Integrated output clamp to demagnetize inductive loads
- Digital sense output via SPI can be configured to measure:
- Load current accurately with integrated ADC
- Output or supply voltage, FET temperature
- Provides full fault diagnostics through SPI interface and indication through FLT pin
- Detection of open load and short-to-battery
The TPS481HS04-Q1 device is a single channel, smart high-side switch controlled through a serial peripheral interface (SPI) and is intended for power distribution as well as actuator drive applications. The device integrates robust protection to ensure output wire and load protection against short circuit or overload conditions. The device features overcurrent protection which is configurable via SPI with sufficient flexibility to support loads that require large inrush currents, while providing improved protection. Further, the device integrates a programmable fuse profile (current versus time) that turns off the switch under persistent overload condition.
The device supports a SPI-configurable capacitive charging mode for ECU loads in power distribution switch applications. The device also includes two low power mode (LPM) states, an auto entry mode or a manual entry mode, that enables the device to provide current to the load ECU while only consuming about 10-20µA of current.
By reporting load current and the channel output voltage and output FET temperature to a system MCU, the device enables diagnosis of switch and load failures.
The TPS481HS04-Q1 is available in a QFN package which allows for reduced PCB footprint.
技術文件
| 重要文件 | 類型 | 標題 | 格式選項 | 下載最新的英文版本 | 日期 | |
|---|---|---|---|---|---|---|
| * | 資料表 | TPS481HS04-Q1 4mΩ , Automotive Single-Channel , SPI Controlled High-Side Switch with Integrated I2 t Wire Protection and Low Power Mode datasheet | PDF | HTML | 2026/9/1 |
設計與開發
如需其他條款或必要資源，請按一下下方的任何標題以檢視詳細頁面 (如有)。
HSS-HCMOTHERBRDEVM — 智慧保險絲評估模組
HSS-HCMOTHERBRDEVM 和對應的子卡（例如 HSS-2HCS10EVM）用於展示和評估德州儀器智慧保險絲高壓側開關產品組合的所有功能。主機板的設計可搭配多個不同子卡使用，讓單主機 EVM 可用於具有不同導通電阻和功能的各種不同高壓側開關。
| 封裝 | 針腳 | CAD 符號、佔位空間與 3D 模型 |
|---|---|---|
| VQFN-HR (RBL) | 21 | Ultra Librarian |
訂購與品質
建議產品可能具有與此 TI 產品相關的參數、評估模組或參考設計。