首頁 電源管理 高壓側開關和控制器 高壓側開關
首頁
電源管理
高壓側開關和控制器
高壓側開關
最新

TPS482H85-Q1

現行

車用 48V、85-mΩ 雙通道智慧型高壓側開關

立即訂購
產品規格表

TPS482H85-Q1

現行
產品規格表 立即訂購

產品詳細資料

Number of channels 2 Rating Automotive Operating voltage (max) (V) 58 Operating voltage (min) (V) 6 Ron (typ) (mΩ) 85 Imax (A) 2.2 Current limit (max) (A) 10.5 Current limit (min) (A) 0.8 Current limit type Adjustable FET Internal Features Adjustable current limit, Automotive load dump, Current sense output, Fault reporting, Inductive load, Inrush current control, Short circuit protection, Thermal shutdown, Under voltage lock out TI functional safety category Functional Safety-Capable Current limit accuracy +/- 15% @ 0.5A Operating temperature range (°C) -40 to 125 Function Adjustable current limit, Automotive load dump compatibility, Current monitoring, Inductive load compatibility, Inrush current control, Short circuit protection, Thermal shutdown
Number of channels 2 Rating Automotive Operating voltage (max) (V) 58 Operating voltage (min) (V) 6 Ron (typ) (mΩ) 85 Imax (A) 2.2 Current limit (max) (A) 10.5 Current limit (min) (A) 0.8 Current limit type Adjustable FET Internal Features Adjustable current limit, Automotive load dump, Current sense output, Fault reporting, Inductive load, Inrush current control, Short circuit protection, Thermal shutdown, Under voltage lock out TI functional safety category Functional Safety-Capable Current limit accuracy +/- 15% @ 0.5A Operating temperature range (°C) -40 to 125 Function Adjustable current limit, Automotive load dump compatibility, Current monitoring, Inductive load compatibility, Inrush current control, Short circuit protection, Thermal shutdown
VQFN-HR (CHU) 12 10.5 mm² (3 mm × 3.5 mm)
  • Qualified for automotive applications
  • AEC-Q100 qualified with the following results:
    • Device temperature grade 1: –40°C to 125°C ambient operating temperature range
  • Functional safety capable
  • Dual-channel 85mΩ smart high-side switch with full diagnostics
  • Wide operating voltage: 6V to 58V
  • Ultra-low standby current, < 2µA per channel
  • High-accuracy current sense: < ±10% for > 50mA
  • Selectable current limit levels with external resistor
  • Protection features:
    • Short-to-GND protection by current limit
    • Absolute and relative thermal shutdown
    • Inductive Load negative voltage clamp with optimized slew rate
    • Loss-of-ground, loss-of-battery, and reverse battery protection
  • Diagnostics features:
    • Overcurrent and short-to-ground detection
    • Open-load and short-to-battery detection
    • Accurate current sense
  • 3.5mm × 3mm small form factor 12-pin QFN package
  • Qualified for automotive applications
  • AEC-Q100 qualified with the following results:
    • Device temperature grade 1: –40°C to 125°C ambient operating temperature range
  • Functional safety capable
  • Dual-channel 85mΩ smart high-side switch with full diagnostics
  • Wide operating voltage: 6V to 58V
  • Ultra-low standby current, < 2µA per channel
  • High-accuracy current sense: < ±10% for > 50mA
  • Selectable current limit levels with external resistor
  • Protection features:
    • Short-to-GND protection by current limit
    • Absolute and relative thermal shutdown
    • Inductive Load negative voltage clamp with optimized slew rate
    • Loss-of-ground, loss-of-battery, and reverse battery protection
  • Diagnostics features:
    • Overcurrent and short-to-ground detection
    • Open-load and short-to-battery detection
    • Accurate current sense
  • 3.5mm × 3mm small form factor 12-pin QFN package

The TPS4H82H85-Q1 device is fully protected dual-channel smart high-side switch with two integrated 85mΩ NMOS power FETs, intended for 24V and 48V automotive systems. The low RON minimizes the device power dissipation when driving a wide range of output load current up to 2.2A when both channels are enabled or 3A when only one channel is enabled. Protection and diagnostic features include accurate current sense, selectable current limit levels, OFF-state open-load, short-to-battery detection, output clamp, and thermal shutdown.

The device provides an accurate load current sense that allows for improved load diagnostics such as overload and open-load detection, which enables better predictive maintenance, without further calibration. The device also implements a selectable current limiting circuit that improves the reliability of the system by reducing inrush current when driving large capacitive loads and minimizing overload current. The TPS4H82H85-Q1 device can be used as a high-side power switch for a wide variety of resistive, inductive, and capacitive loads, including low-wattage bulbs, LEDs, relays, solenoids, and heaters.

The TPS4H82H85-Q1 device is fully protected dual-channel smart high-side switch with two integrated 85mΩ NMOS power FETs, intended for 24V and 48V automotive systems. The low RON minimizes the device power dissipation when driving a wide range of output load current up to 2.2A when both channels are enabled or 3A when only one channel is enabled. Protection and diagnostic features include accurate current sense, selectable current limit levels, OFF-state open-load, short-to-battery detection, output clamp, and thermal shutdown.

The device provides an accurate load current sense that allows for improved load diagnostics such as overload and open-load detection, which enables better predictive maintenance, without further calibration. The device also implements a selectable current limiting circuit that improves the reliability of the system by reducing inrush current when driving large capacitive loads and minimizing overload current. The TPS4H82H85-Q1 device can be used as a high-side power switch for a wide variety of resistive, inductive, and capacitive loads, including low-wattage bulbs, LEDs, relays, solenoids, and heaters.
filter 尋找其它 高壓側開關
下載 觀看有字幕稿的影片 影片

您可能會感興趣的類似產品

open-in-new 比較替代產品
功能相同，但針腳輸出與所比較的裝置不同。
TPS1HTC100-Q1 現行 具有可調整電流限制的車用 60V、4A、83mΩ 單通道智慧型高壓側開關 Single channel switch suited for 48V systems

技術文件

找不到結果。請清除您的搜尋條件，然後再試一次。
檢視所有 5
重要文件 類型 標題 格式選項 下載最新的英文版本 日期
* 資料表 TPS482H85-Q1: 48V, 85mΩ Automotive Dual-Channel Smart High-Side Switch datasheet (Rev. B) PDF | HTML 2026/2/13
應用說明 Basics of High-Side Switches and Controllers PDF | HTML 2026/3/31
功能安全資訊 TPS482H85-Q1 Functional Safety FIT Rate, FMD and Pin FMA PDF | HTML 2025/9/17
應用說明 Charging Capacitive Loads with Smart High-Side Switches PDF | HTML 2025/9/12
證書 TPS482H85EVM EU Declaration of Conformity (DoC) 2025/2/24

設計與開發

如需其他條款或必要資源，請按一下下方的任何標題以檢視詳細頁面 (如有)。

開發板

TPS482H85EVM — 適用於 48V 高壓側交換器 TPS482H85-Q1 的 TPS482H85EVM 評估模組

TPS482H85EVM 是硬體評估模組 (EVM)，可用於讓硬體工程師評估 TPS482H85-Q1 車用高壓側開關的完整性能與功能。此評估板提供可順暢地將電源供應器連接至 TPS482H85-Q1 輸入、將負載連接至輸出通道的方式，以及可順暢使用晶片本身的控制針腳來開啟和關閉裝置的方式。此裝置整合了過熱自動關機、輸出箝位與電流限制等保護功能。
使用指南: PDF | HTML
支援產品和硬體
有庫存
限制：
??asset.out-of-stock-ti_zh_TW??
無法提供
參考設計

TIDA-020094 — 48V 區域參考設計

此參考設計展示了進階車用 48V 低電壓軌架構的趨勢。此設計包括 48V 骨幹架構和 48V 至 12V 電源轉換。參考設計重點介紹關鍵產品的 48V 負載驅動器。這些產品包括高壓側開關 (HSS) 和控制器 (HSSC)、智慧 eFuse 和馬達驅動器 (MD)。

支援產品和硬體
封裝 針腳 CAD 符號、佔位空間與 3D 模型
VQFN-HR (CHU) 12 Ultra Librarian
適用 TI 的評估品項標準條款與條件。

訂購與品質

建議產品可能具有與此 TI 產品相關的參數、評估模組或參考設計。

支援與培訓

內含 TI 工程師技術支援的 TI E2E™ 論壇

以英文檢視所有論壇主題

內容係由 TI 和社群貢獻者依「現狀」提供，且不構成 TI 規範。檢視使用條款。

若有關於品質、封裝或訂購 TI 產品的問題，請參閱 TI 支援。​​​​​​​​​​​​​​

影片