首頁 電源管理 AC/DC & DC/DC converters (integrated FET)
首頁
電源管理
AC/DC & DC/DC converters (integrated FET)

TPS56637

現行

具有 ULQ-Mode 的 4.5V 至 28V、6A 同步降壓轉換器

立即訂購
產品規格表

TPS56637

現行
產品規格表 立即訂購

產品詳細資料

Iout (max) (A) 6 Vin (min) (V) 4.5 Vin (max) (V) 28 Topology Buck Type Converter Switching frequency (min) (kHz) 500 Switching frequency (max) (kHz) 500 Features Enable, Forced PWM, Light Load Efficiency, Pre-Bias Start-Up, Soft Start Fixed, Synchronous Rectification, UVLO adjustable Control mode D-CAP3 Vout (min) (V) 0.6 Vout (max) (V) 13 Rating Catalog Operating temperature range (°C) -40 to 150 Iq (typ) (A) 0.000125
Iout (max) (A) 6 Vin (min) (V) 4.5 Vin (max) (V) 28 Topology Buck Type Converter Switching frequency (min) (kHz) 500 Switching frequency (max) (kHz) 500 Features Enable, Forced PWM, Light Load Efficiency, Pre-Bias Start-Up, Soft Start Fixed, Synchronous Rectification, UVLO adjustable Control mode D-CAP3 Vout (min) (V) 0.6 Vout (max) (V) 13 Rating Catalog Operating temperature range (°C) -40 to 150 Iq (typ) (A) 0.000125
VQFN-HR (RPA) 10 9 mm² 3 x 3
  • 4.5-V to 28-V input voltage range
  • 0.6-V to 13-V output voltage range
  • 6-A maximum continuous output current
  • Integrated 26-mΩ and 12-mΩ MOSFETs
  • 0.6-V ±1% Reference Voltage
  • D-CAP3™ control mode for fast transient response
  • Eco-mode™ and FCCM (forced continuous conduction mode) selectable for light-load operation through MODE pin
  • Internal 2-ms soft start
  • Built-in output discharge function
  • 500-kHz switching frequency
  • Power good indicator to monitor output voltage
  • Cycle by cycle over current limit
  • Non-latched protections for UV, OV, OT and UVLO
  • –40°C to +150°C operating junction temperature
  • Small 10-Pin 3.0-mm × 3.0-mm HotRod™ QFN Package
  • Available in WEBENCH® Power Designer to create custom designs
  • 4.5-V to 28-V input voltage range
  • 0.6-V to 13-V output voltage range
  • 6-A maximum continuous output current
  • Integrated 26-mΩ and 12-mΩ MOSFETs
  • 0.6-V ±1% Reference Voltage
  • D-CAP3™ control mode for fast transient response
  • Eco-mode™ and FCCM (forced continuous conduction mode) selectable for light-load operation through MODE pin
  • Internal 2-ms soft start
  • Built-in output discharge function
  • 500-kHz switching frequency
  • Power good indicator to monitor output voltage
  • Cycle by cycle over current limit
  • Non-latched protections for UV, OV, OT and UVLO
  • –40°C to +150°C operating junction temperature
  • Small 10-Pin 3.0-mm × 3.0-mm HotRod™ QFN Package
  • Available in WEBENCH® Power Designer to create custom designs

The TPS56637 is a high efficiency, high-voltage input, easy-to-use synchronous buck converter with integrated MOSFETs.

With the wide operating input voltage range of 4.5 V to 28 V, the TPS56637 is ideally suited for systems powered from 12-V, 19-V, 24-V power-bus rails. It supports up to 6-A continuous output current at output voltages between 0.6 V and 13 V.

The TPS56637 uses DCAP3™ control mode to provide fast transient response, good line and load regulation, no requirement for external compensation, and supports low equivalent series resistance (ESR) output capacitors such as POSCAP and MLCC.

The TPS56637 has both FCCM and Eco-mode™ operation modes for selection at light-load condition through configuration of MODE pin. To attain high efficiency at light load, Eco-mode™ could be selected. To support tight output voltage ripple requirement, FCCM could be selected.

The TPS56637 provides complete non-latched OV (Over-voltage), UV (Under-voltage), OC (Over-current), OT (Over-temperature) and UVLO (Under-voltage lock-out) protections combined with power good indicator and output discharge function features.

The TPS56637 is available in a 10-pin 3.0-mm x 3.0-mm HotRod™ QFN package and the junction temperature is specified from –40°C to 150°C.

The TPS56637 is a high efficiency, high-voltage input, easy-to-use synchronous buck converter with integrated MOSFETs.

With the wide operating input voltage range of 4.5 V to 28 V, the TPS56637 is ideally suited for systems powered from 12-V, 19-V, 24-V power-bus rails. It supports up to 6-A continuous output current at output voltages between 0.6 V and 13 V.

The TPS56637 uses DCAP3™ control mode to provide fast transient response, good line and load regulation, no requirement for external compensation, and supports low equivalent series resistance (ESR) output capacitors such as POSCAP and MLCC.

The TPS56637 has both FCCM and Eco-mode™ operation modes for selection at light-load condition through configuration of MODE pin. To attain high efficiency at light load, Eco-mode™ could be selected. To support tight output voltage ripple requirement, FCCM could be selected.

The TPS56637 provides complete non-latched OV (Over-voltage), UV (Under-voltage), OC (Over-current), OT (Over-temperature) and UVLO (Under-voltage lock-out) protections combined with power good indicator and output discharge function features.

The TPS56637 is available in a 10-pin 3.0-mm x 3.0-mm HotRod™ QFN package and the junction temperature is specified from –40°C to 150°C.
open-in-new 尋找其它 AC/DC & DC/DC converters (integrated FET)
下載 觀看有字幕稿的影片 影片

您可能會感興趣的類似產品

open-in-new 比較替代產品
引腳對引腳的功能與所比較的產品相同
最新 TPS56837 現行 4.5-V 至 28-V 輸入、8-A 同步降壓轉換器 Higher efficiency and lower IQ

技術文件

star =TI 所選的此產品重要文件
找不到結果。請清除您的搜尋條件，然後再試一次。
檢視所有 4
類型 標題 日期
* Data sheet TPS56637 4.5-V to 28-V Input, 6-A Synchronous Buck Converter datasheet (Rev. A) PDF | HTML 2019年 4月 11日
EVM User's guide TPS56637 Buck Converter Evaluation Module User's Guide (Rev. B) PDF | HTML 2021年 6月 10日
Selection guide Buck Converter Quick Reference Guide (Rev. B) 2021年 4月 8日
Application note Optimize Output Filter on D-CAP2 for Stability Improvement 2017年 6月 13日

設計與開發

如需其他條款或必要資源，請按一下下方的任何標題以檢視詳細頁面 (如有)。

開發板

TPS56637EVM — DC-DC 降壓轉換器評估模組

The TPS56637 is an adaptive on-time D-CAP3™ mode synchronous step-down DC-DC converter, and is able to deliver 6-A continuous output current. This switch mode power supply (SMPS) IC is optimized for applications require very low-power consumption, such as printers, DTV and monitor, by (...)
使用指南: PDF | HTML
TI.com 無法提供
模擬型號

TPS56637 PSpice Transient Model

SLVMD48.ZIP (109 KB) - PSpice Model
下載
封裝 引腳 下載
VQFN-HR (RPA) 10 檢視選項
適用 TI 的評估品項標準條款與條件。

訂購與品質

內含資訊：
  • RoHS
  • REACH
  • 產品標記
  • 鉛塗層/球物料
  • MSL 等級/回焊峰值
  • MTBF/FIT 估算值
  • 材料內容
  • 資格摘要
  • 進行中可靠性監測
內含資訊：
  • 晶圓廠位置
  • 組裝地點

支援與培訓

內含 TI 工程師技術支援的 TI E2E™ 論壇

以英文檢視所有論壇主題

內容係由 TI 和社群貢獻者依「現狀」提供，且不構成 TI 規範。檢視使用條款。

若有關於品質、封裝或訂購 TI 產品的問題，請參閱 TI 支援。​​​​​​​​​​​​​​

影片