首頁 電源管理 DC/DC 切換穩壓器 DC/DC 轉換器
首頁
電源管理
DC/DC 切換穩壓器
DC/DC 轉換器
最新

TPS61382A-Q1

現行

車用 2.2MHz、36V 15A 升壓轉換器，具備降壓/LDO 充電器與電池健康度檢測功能

立即訂購
產品規格表

TPS61382A-Q1

現行
產品規格表 立即訂購

產品詳細資料

Rating Automotive Topology Buck/Boost Vin (max) (V) 12 Vin (min) (V) 0.5 Vout (max) (V) 12 Vout (min) (V) 5 Switch current limit (typ) (A) 15 Features Adjustable current limit, Bidirectional, Enable, I2C interface, Spread Spectrum, Synchronous rectification EMI features Frequency Dithering, Spread Spectrum Control mode Peak current mode Operating temperature range (°C) -40 to 125 Iq (typ) (A) 0.00002 Duty cycle (max) (%) 90
Rating Automotive Topology Buck/Boost Vin (max) (V) 12 Vin (min) (V) 0.5 Vout (max) (V) 12 Vout (min) (V) 5 Switch current limit (typ) (A) 15 Features Adjustable current limit, Bidirectional, Enable, I2C interface, Spread Spectrum, Synchronous rectification EMI features Frequency Dithering, Spread Spectrum Control mode Peak current mode Operating temperature range (°C) -40 to 125 Iq (typ) (A) 0.00002 Duty cycle (max) (%) 90
WQFN-FCRLF (RAV) 24 12 mm² 4 x 3
  • AEC-Q100 qualified for automotive applications
    • Device temperature grade 1: –40°C to 125°C ambient operating temperature range
  • Functional Safety-Capable
  • I2C programmable buck/LDO charger
    • Supports charger input voltage (VOUT Pin) up to 20V, absolute maximum value of up to 40V to withstand load dump
    • Supports multi-chemistry battery charging profile of from 1 to 5cell NiMH, from 1 to 2cell Li-Ion, LiFePO4
    • Programmable charging current up to 500mA
    • Wide battery voltage operating range from 0V to 12V
    • Programmable charging timer up to 32h
    • NTC thermistor input to monitor battery temperature
  • Programmable boost converter supporting 12V car battery back-up power system
    • Programmable output voltage range: 5V to 12V
    • Programmable boost average input current limit from 5A to 15A
    • Back-up battery (BUB) voltage in boost mode: 0.5V to 12V
      • Minimum 3V for start-up
      • Can start up at 1V when Vout > 5V
    • < 20us automatic transition into the boost mode when 12V system voltage drops
  • Backup battery State-of-Health (SOH) detection
    • Adjustable discharge current from 0A to 1.5A
    • Multi-signal analog output (AVI pin) of battery voltage, discharge current and battery temperature
  • Lower quiescent current and leakage current
    • 20µA quiescent current in standby mode
    • < 1µA shutdown current
    • < 1µA leakage current for pins connected to the back up battery
  • EMI mitigation
    • 2.2MHz fix switching frequency
    • Programmable spread spectrum
  • 3mm × 4mm, 25-pin package with wettable flank
  • AEC-Q100 qualified for automotive applications
    • Device temperature grade 1: –40°C to 125°C ambient operating temperature range
  • Functional Safety-Capable
  • I2C programmable buck/LDO charger
    • Supports charger input voltage (VOUT Pin) up to 20V, absolute maximum value of up to 40V to withstand load dump
    • Supports multi-chemistry battery charging profile of from 1 to 5cell NiMH, from 1 to 2cell Li-Ion, LiFePO4
    • Programmable charging current up to 500mA
    • Wide battery voltage operating range from 0V to 12V
    • Programmable charging timer up to 32h
    • NTC thermistor input to monitor battery temperature
  • Programmable boost converter supporting 12V car battery back-up power system
    • Programmable output voltage range: 5V to 12V
    • Programmable boost average input current limit from 5A to 15A
    • Back-up battery (BUB) voltage in boost mode: 0.5V to 12V
      • Minimum 3V for start-up
      • Can start up at 1V when Vout > 5V
    • < 20us automatic transition into the boost mode when 12V system voltage drops
  • Backup battery State-of-Health (SOH) detection
    • Adjustable discharge current from 0A to 1.5A
    • Multi-signal analog output (AVI pin) of battery voltage, discharge current and battery temperature
  • Lower quiescent current and leakage current
    • 20µA quiescent current in standby mode
    • < 1µA shutdown current
    • < 1µA leakage current for pins connected to the back up battery
  • EMI mitigation
    • 2.2MHz fix switching frequency
    • Programmable spread spectrum
  • 3mm × 4mm, 25-pin package with wettable flank

The TPS61382A-Q1 is 2.2MHz, 40V, 15A automotive bi-directional boost converter, buck charger with battery health detection function for back-up power like TBOX. The device supports 40V absolute maximum voltage on VOUT pin to withstand load-dump condition and supports direct connection with 12V car battery.

The TPS61382A-Q1 integrates I2C configurable buck/LDO charger supporting NiMH, Li-Ion, LiFePO4.

TPS61382A-Q1 integrates boost function that operates over 0.5V-12V BUB voltage and 5V-12V output voltage. The device applies fix frequency peak current control scheme with optional spread spectrum to minimize EMI. The boost function supports 5A to 15A programmable average current limit.

The TPS61382A-Q1 integrates battery health detection feature which discharge the battery with a constant current and detects the voltage drop across the battery internal resistance.

The TPS61382A-Q1 is available in a 3mm × 4mm QFN package with wettable flank. Care must be taken when designing the PCB with TPS61382A-Q1. See also Layout Example.

The TPS61382A-Q1 is 2.2MHz, 40V, 15A automotive bi-directional boost converter, buck charger with battery health detection function for back-up power like TBOX. The device supports 40V absolute maximum voltage on VOUT pin to withstand load-dump condition and supports direct connection with 12V car battery.

The TPS61382A-Q1 integrates I2C configurable buck/LDO charger supporting NiMH, Li-Ion, LiFePO4.

TPS61382A-Q1 integrates boost function that operates over 0.5V-12V BUB voltage and 5V-12V output voltage. The device applies fix frequency peak current control scheme with optional spread spectrum to minimize EMI. The boost function supports 5A to 15A programmable average current limit.

The TPS61382A-Q1 integrates battery health detection feature which discharge the battery with a constant current and detects the voltage drop across the battery internal resistance.

The TPS61382A-Q1 is available in a 3mm × 4mm QFN package with wettable flank. Care must be taken when designing the PCB with TPS61382A-Q1. See also Layout Example.
filter 尋找其它 DC/DC 轉換器
下載 觀看有字幕稿的影片 影片

技術文件

star =TI 所選的此產品重要文件
找不到結果。請清除您的搜尋條件，然後再試一次。
檢視所有 2
重要文件 類型 標題 格式選項 日期
* Data sheet TPS61382A-Q1 Automotive 2.2MHz, 36V, 15A Boost Converter With Buck/LDO Charger and Battery State of Health Detection datasheet PDF | HTML 2026年 4月 22日
Certificate TPS61382AQEVM-158 EU Declaration of Conformity (DoC) 2025年 12月 23日

設計與開發

如需其他條款或必要資源，請按一下下方的任何標題以檢視詳細頁面 (如有)。

開發板

TPS61382AQEVM-158 — TPS61382A-Q1 評估模組

TPS61382AQEVM-158 可在 0V 至 12V 的備用電池電壓範圍及主電池電壓最高 40V 運作，以實現雙向運作。EVM 在升壓模式下以 3.6V BUB 和 6.2V 輸出支援最高達 5.5A 負載的輸出，並在充電器模式下支援 50-500mA 充電電流。裝置功能可使用 I2C 介面調整。
使用指南: PDF | HTML
TI.com 無法提供
封裝 針腳 CAD 符號、佔位空間與 3D 模型
WQFN-FCRLF (RAV) 24 Ultra Librarian
適用 TI 的評估品項標準條款與條件。

訂購與品質

內含資訊：
  • RoHS
  • REACH
  • 產品標記
  • 鉛塗層/球物料
  • MSL 等級/回焊峰值
  • MTBF/FIT 估算值
  • 材料內容
  • 認證摘要
  • 進行中的可靠性監測
內含資訊：
  • 晶圓廠位置
  • 組裝地點

建議產品可能具有與此 TI 產品相關的參數、評估模組或參考設計。

支援與培訓

內含 TI 工程師技術支援的 TI E2E™ 論壇

以英文檢視所有論壇主題

內容係由 TI 和社群貢獻者依「現狀」提供，且不構成 TI 規範。檢視使用條款。

若有關於品質、封裝或訂購 TI 產品的問題，請參閱 TI 支援。​​​​​​​​​​​​​​

影片