TPS61391
- Input voltage range: 2.5 V to 5.5 V
- Output voltage range: up to 85 V
- R(DS)on of switching FET: 0.9 Ω
- Switch current limit: 1000 mA
- High optical power protection with 0.5-µs response time
- Switching frequency: 700 kHz
- Quiescent current: 110 µA from VIN, 340 µA from VOUT, 140 µA from AVCC
- Soft-start time: 4.8 ms
- Package: 3 mm × 3 mm × 0.75 mm QFN
The TPS61391 is a 700-kHz pulse-width modulating (PWM) step-up converter with an 85-V switch FET with an input ranging from 2.5 V to 5.5 V. The switching peak current is up to 1000 mA. The TPS61391 includes accurate current mirror with two gain options selectable (1 : 5 or 4 : 5).
The TPS61391 also provides high optical-power protection with an additional FET in series with the APD power path with the typical response time of 0.5 µs . It can recover automatically once the high optical releasing.
The TPS61391 is available in 3 mm × 3 mm QFN package with exposed pad underneath.
技術文件
找不到結果。請清除您的搜尋條件,然後再試一次。
檢視所有 5 | 類型 | 標題 | 日期 | ||
|---|---|---|---|---|
| * | Data sheet | TPS61391 85-VOUT Boost Converter with Current Mirror Integrated datasheet | PDF | HTML | 2019年 7月 11日 |
| Application note | High-Precision Negative-Voltage APD Power Supply Design with TPS61391 | PDF | HTML | 2020年 11月 2日 | |
| Application note | How to Sample the Small APD Current Precisely With TPS61390 Boost Converter | 2019年 12月 20日 | ||
| Application note | TPS61390 Boost Converter With Low APD Bias Voltage Ripple | 2019年 12月 13日 | ||
| EVM User's guide | TPS61391EVM-058 Evaluation Module | 2019年 11月 14日 |
設計與開發
如需其他條款或必要資源,請按一下下方的任何標題以檢視詳細頁面 (如有)。
開發板
TPS61391EVM-058 — 適用於 TPS61391 的 85-V 升壓轉換器評估模組
TPS61391 是整合電流鏡和取樣/保持電路的升壓轉換器,設計用於偏壓和監控光學接收器中的雪崩光電二極體 (APD)。TPS61391 支援從 2.5V 至 5.5V 輸入範圍中高達 85-V 之輸出。 切換峰值電流高達 1000mA,切換頻率為 700kHz。
使用指南: PDF
參考設計
PMP40871 — 48-V 輸出低雜訊幻象電源參考設計
此參考設計可為使用 TPS61391 和 TPS7A4101 的幻象電源應用提供 48-V 輸出低雜訊電源供應。TPS61391 為一款將 3.3 V 或 5 V 轉換為 48.5 V 的 700-kHz PWM 升壓轉換器。TPS7A4101 是 50-V 容限輸入及 0.29-V 壓降 LDO,可升壓 48.5 V 降至 48 V,並可將輸出漣波降至最低。此設計在 5-V 輸入下支援 48-V、20-mA 輸出功率。輸出漣波約爲 8.4-mV,對於幻影電源應用而言偏低。
| 封裝 | 針腳 | CAD 符號、佔位空間與 3D 模型 |
|---|---|---|
| WQFN (RTE) | 16 | Ultra Librarian |
訂購與品質
內含資訊:
- RoHS
- REACH
- 產品標記
- 鉛塗層/球物料
- MSL 等級/回焊峰值
- MTBF/FIT 估算值
- 材料內容
- 認證摘要
- 進行中持續性的可靠性監測
內含資訊:
- 晶圓廠位置
- 組裝地點
建議產品可能具有與此 TI 產品相關的參數、評估模組或參考設計。