TPS62740

現行

具 360nA Iq 的 2.2V-5.5V 輸入、超低功耗 300mA 降壓 DCDC 轉換器

現在提供此產品的更新版本

open-in-new 比較替代產品
功能與所比較的裝置相似
TPS62840 現行 60nA 靜態電流 (IQ)、1.8V 至 6.5V 輸入電壓 750mA 高效降壓轉換器 Higher output current, lower IQ and additional features.

產品詳細資料

Rating Catalog Topology Buck Iout (max) (A) 0.3 Vin (max) (V) 5.5 Vin (min) (V) 2.2 Vout (max) (V) 3.3 Vout (min) (V) 1.8 Features Adaptive/Dynamic Voltage Scaling, Enable, Light Load Efficiency, Light load efficiency, Output discharge, Synchronous Rectification Control mode Constant on-time (COT), DCS-Control Switching frequency (min) (kHz) 2000 Switching frequency (max) (kHz) 2000 Operating temperature range (°C) -40 to 85 Iq (typ) (µA) 0.3 Duty cycle (max) (%) 100 Type Converter
Rating Catalog Topology Buck Iout (max) (A) 0.3 Vin (max) (V) 5.5 Vin (min) (V) 2.2 Vout (max) (V) 3.3 Vout (min) (V) 1.8 Features Adaptive/Dynamic Voltage Scaling, Enable, Light Load Efficiency, Light load efficiency, Output discharge, Synchronous Rectification Control mode Constant on-time (COT), DCS-Control Switching frequency (min) (kHz) 2000 Switching frequency (max) (kHz) 2000 Operating temperature range (°C) -40 to 85 Iq (typ) (µA) 0.3 Duty cycle (max) (%) 100 Type Converter
WSON (DSS) 12 6 mm² 3 x 2
  • Input Voltage Range VIN from 2.2V to 5.5
  • Typ. 360nA Quiescent Current
  • Up to 90% Efficiency at 10µA Output Current
  • Up to 300mA / 400mA Output Current (TPS62740/TPS62742)
  • RF Friendly DCS-Control™
  • Up to 2 MHz Switching Frequency
  • Low Output Ripple Voltage
  • 16 Selectable Output Voltages in 100mV Steps between
    1.8V to 3.3V
  • Automatic Transition to No Ripple 100% Mode
  • Slew Rate Controlled Load Switch
  • Discharge Function on VOUT / LOAD
  • Power Good Output
  • Optimized for Operation with a Tiny 2.2µH Inductor
    and 10µF COUT
  • Total Solution Size <31mm2
  • Small 2 × 3 mm2 WSON Package
  • Input Voltage Range VIN from 2.2V to 5.5
  • Typ. 360nA Quiescent Current
  • Up to 90% Efficiency at 10µA Output Current
  • Up to 300mA / 400mA Output Current (TPS62740/TPS62742)
  • RF Friendly DCS-Control™
  • Up to 2 MHz Switching Frequency
  • Low Output Ripple Voltage
  • 16 Selectable Output Voltages in 100mV Steps between
    1.8V to 3.3V
  • Automatic Transition to No Ripple 100% Mode
  • Slew Rate Controlled Load Switch
  • Discharge Function on VOUT / LOAD
  • Power Good Output
  • Optimized for Operation with a Tiny 2.2µH Inductor
    and 10µF COUT
  • Total Solution Size <31mm2
  • Small 2 × 3 mm2 WSON Package

The TPS6274x is industry’s first step down converter featuring typ. 360nA quiescent current and operating with a tiny 2.2µH inductor and 10µF output capacitor. This new DCS-Control™ based device extends the light load efficiency range below 10µA load currents. TPS62740 supports output currents up to 300mA, TPS62742 up to 400mA. The device operates from rechargeable Li-Ion batteries, Li-primary battery chemistries such as Li-SOCl2, Li-MnO2 and two or three cell alkaline batteries. The input voltage range up to 5.5V allows also operation from a USB port and thin-film solar modules. The output voltage is user selectable by four VSEL pins within a range from 1.8V to 3.3V in 100mV steps. TPS6274x features low output ripple voltage and low noise with a small output capacitor. Once the battery voltage comes close to the output voltage (close to 100% duty cycle) the device enters no ripple 100% mode operation to prevent an increase of output ripple voltage. The device then stops switching and the output is connected to the input voltage. The integrated slew rate controlled load switch provides typ. 0.6Ω on-resistance and can distribute the selected output voltage to a temporarily used sub-system. The TPS6274x is available in a small 12 pin 2 × 3mm2 WSON package and supports a total solutions size of 31mm2.

The TPS6274x is industry’s first step down converter featuring typ. 360nA quiescent current and operating with a tiny 2.2µH inductor and 10µF output capacitor. This new DCS-Control™ based device extends the light load efficiency range below 10µA load currents. TPS62740 supports output currents up to 300mA, TPS62742 up to 400mA. The device operates from rechargeable Li-Ion batteries, Li-primary battery chemistries such as Li-SOCl2, Li-MnO2 and two or three cell alkaline batteries. The input voltage range up to 5.5V allows also operation from a USB port and thin-film solar modules. The output voltage is user selectable by four VSEL pins within a range from 1.8V to 3.3V in 100mV steps. TPS6274x features low output ripple voltage and low noise with a small output capacitor. Once the battery voltage comes close to the output voltage (close to 100% duty cycle) the device enters no ripple 100% mode operation to prevent an increase of output ripple voltage. The device then stops switching and the output is connected to the input voltage. The integrated slew rate controlled load switch provides typ. 0.6Ω on-resistance and can distribute the selected output voltage to a temporarily used sub-system. The TPS6274x is available in a small 12 pin 2 × 3mm2 WSON package and supports a total solutions size of 31mm2.

下載 觀看有字幕稿的影片 影片

您可能會感興趣的類似產品

open-in-new 比較替代產品
功能與所比較的裝置相似
TPS82740A 現行 具有 360nA Iq的 200-mA 降壓轉換器模組 For smaller BOM size and ease-of-use check out the module alternative.
TPS82740B 現行 具有 360nA Iq的 200-mA 降壓轉換器模組 For smaller BOM size and ease-of-use check out the module alternative.

技術文件

star =TI 所選的此產品重要文件
找不到結果。請清除您的搜尋條件,然後再試一次。
檢視所有 27
類型 標題 日期
* Data sheet TPS6274x 360nA IQ Step Down Converter For Low Power Applications datasheet (Rev. B) PDF | HTML 2014年 7月 10日
Application note QFN and SON PCB Attachment (Rev. C) PDF | HTML 2023年 12月 6日
Application note Quick Reference Guide To TI Buck Switching DC/DC Application Notes (Rev. B) PDF | HTML 2022年 5月 23日
Selection guide Buck Converter Quick Reference Guide (Rev. B) 2021年 4月 8日
White paper Extending Battery Life in Smart E-Locks (Rev. A) 2020年 6月 4日
White paper Benefits of a Resistor-to-Digital Converter in Ultra-Low Power Supplies 2019年 10月 14日
Analog Design Journal Methods of output-voltage adjustment for DC/DC converters 2019年 6月 14日
Application note Performing Accurate PFM Mode Efficiency Measurements (Rev. A) 2018年 12月 11日
Analog Design Journal Understanding 100% mode in low-power DC/DC converters 2018年 6月 22日
Analog Design Journal Achieving a clean startup by using a DC/DC converter with a precise enable-pin threshold 2017年 10月 24日
Technical article Never lose your luggage again with a smart tracker design PDF | HTML 2017年 10月 20日
Technical article How energy harvesting can extend the life of your fault indicator on the grid PDF | HTML 2017年 10月 18日
Analog Design Journal Testing tips for applying external power to supply outputs without an input voltage 2016年 10月 24日
Technical article Find your pot of gold—no luck required! PDF | HTML 2016年 3月 14日
Application note Efficient Super-Capacitor Charging with TPS62740 2015年 12月 15日
Analog Design Journal Understanding frequency variation in the DCS-Control(TM) topology 2015年 10月 30日
Technical article Achieve longer battery lifetimes from wireless sensors PDF | HTML 2015年 10月 22日
Application note Basic Calculation of a Buck Converter's Power Stage (Rev. B) 2015年 8月 17日
Analog Design Journal Five steps to a great PCB layout for a step-down converter 2015年 1月 29日
White paper Complete Wireless M-Bus Solution (Rev. B) 2014年 11月 5日
Analog Design Journal Accurately measuring efficiency of ultralow-IQ devices 2014年 1月 22日
EVM User's guide TPS62740 EVM User's Guide 2013年 11月 11日
Analog Design Journal High-efficiency, low-ripple DCS-Control offers seamless PWM/pwr-save transitions 2013年 7月 25日
Application note How to Measure the Control Loop of DCS-Control Devices (Rev. A) 2012年 8月 9日
Application note Understanding the Absolute Maximum Ratings of the SW Node (Rev. A) 2012年 1月 13日
Application note Choosing an Appropriate Pull-up/Pull-down Resistor for Open Drain Outputs 2011年 9月 19日
Analog Design Journal IQ: What it is, what it isn’t, and how to use it 2011年 6月 17日

設計與開發

如需其他條款或必要資源,請按一下下方的任何標題以檢視詳細頁面 (如有)。

開發板

CDCI6214EVM — CDCI6214 超低功耗時鐘產生器評估模組

介面可透過 I2C 匯流排與 CDCI6214 通訊,且可存取控制接腳與電源供應。邊緣安裝的 SMA 連接器支援使用 50Ω 測量設備進行測量,且板載終端電阻允許使用高阻抗探針。彈性修改選項可調整評估模組以符合多種應用特定需求,實現快速原型開發。
使用指南: PDF
TI.com 無法提供
開發板

EVM430-FR6043 — MSP430FR6043 超音波感測評估模組

EVM430-FR6043 評估套件是用於評估 MSP430FR6043 性能的開發平台,適用於超音波感測應用(例如智慧型瓦斯表)。MSP430FR6043 MCU 是一款整合超音波感測類比前端 (USS) 的超低功耗 MCU,可進行高精密度與準確的超音波量測。本裝置也包含低功耗加速器 (LEA),可進行最佳化訊號處理,且有助於將功率最佳化以延長電池使用壽命。套件提供彈性解決方案,能讓工程師使用 MSP430FR6043 MCU 與不同頻率的各種轉換器進行快速評估與開發。EVM 能夠以板載 LCD 和 RF 通訊模組連接器顯示量測參數。 
使用指南: PDF
TI.com 無法提供
開發板

TPS62740EVM-186 — TPS62740EVM-186 超低 IQ 降壓轉換器低功耗無線應用評估模組

The TPS62740EVM-186 is designed to help the user easily evaluate and test the operation and functionality of the TPS62740. The EVM converts a 2.2-V to 5.5-V input voltage to a regulated output voltage that is set between 1.8 V and 3.3 V at up to 300 mA. The TPS62740 also includes an integrated load (...)

使用指南: PDF
TI.com 無法提供
模擬型號

TPS62740 PSpice Unencrypted Transient Model (Rev. A)

SLVM983A.ZIP (123 KB) - PSpice Model
Gerber 檔案

TPS62740EVM-186 Gerber

SLVC544.ZIP (337 KB)
參考設計

TIDM-ULTRASONIC-FLOW-TDC — 使用時間轉數位轉換器進行超音波水錶設計

The TIDM-ULTRASONIC-FLOW-TDC is a reference design for an ultrasonic flow meter (water, gas or heat meter) with LCD built using a Time-to-Digital converter and an ultra-low power MCU. Solution includes optimized leakage detection, low power consumption, and a small form factor that are (...)
Design guide: PDF
電路圖: PDF
參考設計

TIDA-00807 — 超低功耗高架故障指示燈故障監控參考設計

故障指示器 (FI) 是安裝在配電網路高架電源線上一定距離的裝置,用於偵測並指出發生故障的狀況。其優點是可輕鬆識別故障區域,從而縮短停機時間。  TIDA-00807 參考設計配備超低功率 MCU 和離散式類比前端,可監控和測量安裝位置的電流和電壓參數。此外,包含 DAC 和霍爾開關的自我測試機制可配置為執行診斷程式,以允許系統自我測試。
Design guide: PDF
電路圖: PDF
參考設計

TIDA-01463 — 採用 IEEE802.3bt 乙太網路供電 (PoE) 的連線 LED 照明參考設計

此乙太網路供電 (PoE) 參考設計可透過單一乙太網路纜線向連線 LED 照明安定器傳輸電源和資料。此參考設計採用 TI 的 TPS2372-4 PoE 供電產品 (PD) 介面、LM3409 降壓控制器、LM5165 降壓轉換器、TPS62740 降壓轉換器、TM4C1292NCPDT 微控制器 (MCU)、TPD4E05U06-Q1 ESD 防護裝置和 DP83822I 乙太網路 PHY 為 LED 燈供電,並可在連接至網路時遠端控制 LED 燈的亮度和調光參數。

需要支援 IEEE802.3bt 的 PSE 控制器嗎?進一步瞭解 TPS23881
Design guide: PDF
電路圖: PDF
參考設計

TIDA-01012 — 無線物聯網、低功耗藍牙®、4½ 位元、100 kHz 真 RMS 數位萬用電錶

許多產品現在透過物聯網 (IoT) 實現連網功能,包括數位萬用電表 (DMM) 等 測試設備。  由德州儀器的 SimpleLink™ 超低功耗無線微控制器 (MCU) 平台驅動,TIDA-01012 參考設計展示了一款具備連網功能的 4½ 位數、100kHz 真 RMS DMM,支援 Bluetooth® 低功耗連線、NFC 藍牙配對,以及由 TI 的 CapTIvate™ 技術實現的自動喚醒功能。

 
Design guide: PDF
電路圖: PDF
參考設計

TIDA-01014 — 適用於低功耗工業物聯網現場計量的強化準確度電池電量計參考設計

物聯網 (IoT) 革命可有效連接應用與儀器,實現電池供電的廣泛超低功耗感測器部署。  TI 進階感測器和低功耗連線裝置等新技術使這些儀器能夠設計成電池供電無線系統,大幅改善成本、部署、可靠性、性能和複雜性。

TIDA-01014 參考設計採用德州儀器的 SimpleLink™ 超低功耗無線微控制器 (MCU) 平台,運用 TIDA-01012 無線 DMM 參考設計,展示 bq27426 如何用來強化電池管理系統的電量計性能,最終達到最佳耗電量。TIDA-01014 具備無線連接、4½ 位數、100kHz 真 RMS DMM,支援 Bluetooth 低功耗® (BLE) 無線連線、NFC (...)

Design guide: PDF
電路圖: PDF
參考設計

TIDA-00879 — 高度整合的 4 位半低功耗手持式數位萬用表 (DMM) 平臺參考設計

TIDA-00879 TI-Design 利用 MSP430F6736 MCU 的特點、功能、性能,以及最先進的低功率和電源管理功能,展示高度整合、低成本且低功率的數位萬用表平台。  此解決方案以極具競爭力的系統層級成本提供 4.5 位數或 60K 顯示計數解析度、採用韌體的真 RMS 和實際功率測量、整合式 LCD 控制器/驅動器子系統,以及使用 3 顆 AAA 鹼性電池時超過 600 小時的電池壽命。
Design guide: PDF
電路圖: PDF
參考設計

TIDA-00676 — 適用於電池供電類儀錶 (30dBm wM-Bus/169 MHz) 的電源解決方案參考設計

此電源管理解決方案可透過各種電池類型提供 900mA @3.6V,適用於智慧流量測量應用 (家用瓦斯表和水表)。TIDA-00676 包含 ETSI Cat.適用於 wM-Bus @ 169 MHz 且支援 1 個接收器的 RF 子系統,傳輸功率高達 +30 dBm,符合義大利和法國 169MHz RF 連結的所有技術要求。電源管理和 RF 子系統可同樣有效運用於具 wM-Bus@ 169 MHz 鏈路的資料收集器和其他終端節點 (E 電表或屋內顯示器)。
Design guide: PDF
電路圖: PDF
參考設計

TIDC-WMBUS-868MHZ — 適用於智慧型公用事業儀錶和暖氣費計費器,支援 ETSI Cat2 接收器的 wM-Bus 868 MHz 射頻子系統

此參考設計說明 ETSI Cat.適用於智慧電表且支援 2 個接收器相容 RF 子系統,根據 EN13757-4:2014,完全符合最受歡迎的 868 MHz wM-Bus S、T 和 C 模式。SimpleLink RF 收發器裝置在 wM-Bus 應用中提供領先市場的阻斷,選擇性和 RX 靈敏度編號,例如雙向流量計、電表和暖氣費計費器。此成本最佳化設計運用平價的 XTAL 元件,可處理 S2 模式下 +-60ppm 的最糟頻率偏移。無需外部 SAW 濾波器或昂貴的 TCXO 元件,即可滿足 wM-Bus 模式 @ 868 MHz 的規格。再者此外,此設計採用具可動態調整輸出電壓的超低 (...)
Design guide: PDF
電路圖: PDF
封裝 針腳 CAD 符號、佔位空間與 3D 模型
WSON (DSS) 12 Ultra Librarian

訂購與品質

內含資訊:
  • RoHS
  • REACH
  • 產品標記
  • 鉛塗層/球物料
  • MSL 等級/回焊峰值
  • MTBF/FIT 估算值
  • 材料內容
  • 認證摘要
  • 進行中持續性的可靠性監測
內含資訊:
  • 晶圓廠位置
  • 組裝地點

建議產品可能具有與此 TI 產品相關的參數、評估模組或參考設計。

支援與培訓

內含 TI 工程師技術支援的 TI E2E™ 論壇

內容係由 TI 和社群貢獻者依「現狀」提供,且不構成 TI 規範。檢視使用條款

若有關於品質、封裝或訂購 TI 產品的問題,請參閱 TI 支援。​​​​​​​​​​​​​​

影片