首頁 電源管理 DC/DC 切換穩壓器 DC/DC 轉換器

TPS62871

現行

具有頻率同步選項的 6V、9A 堆疊式同步降壓轉換器

產品詳細資料

Rating Catalog Topology Buck Iout (max) (A) 9 Vin (max) (V) 6 Vin (min) (V) 2.7 Vout (max) (V) 3.35 Vout (min) (V) 0.4 Switch current limit (typ) (A) 16 Features Adaptive/Dynamic Voltage Scaling, Differential Remote Sense, Enable, Fixed Output, Forced PWM, Frequency synchronization, I2C, I2C bus interface, I2C control, I2C interface, I2C/PMBus, Light Load Efficiency, Output discharge, Over Current Protection, Power good, Pre-Bias Start-Up, Soft Start Fixed, Spread Spectrum, Synchronous Rectification, UVLO Fixed, Wettable flanks package EMI features Low parasitic Hotrod packaging, Spread Spectrum Control mode Constant on-time (COT), DCS-Control Operating temperature range (°C) -40 to 125 Iq (typ) (A) 0.00175 Duty cycle (max) (%) 70
Rating Catalog Topology Buck Iout (max) (A) 9 Vin (max) (V) 6 Vin (min) (V) 2.7 Vout (max) (V) 3.35 Vout (min) (V) 0.4 Switch current limit (typ) (A) 16 Features Adaptive/Dynamic Voltage Scaling, Differential Remote Sense, Enable, Fixed Output, Forced PWM, Frequency synchronization, I2C, I2C bus interface, I2C control, I2C interface, I2C/PMBus, Light Load Efficiency, Output discharge, Over Current Protection, Power good, Pre-Bias Start-Up, Soft Start Fixed, Spread Spectrum, Synchronous Rectification, UVLO Fixed, Wettable flanks package EMI features Low parasitic Hotrod packaging, Spread Spectrum Control mode Constant on-time (COT), DCS-Control Operating temperature range (°C) -40 to 125 Iq (typ) (A) 0.00175 Duty cycle (max) (%) 70
VQFN-FCRLF (RXS) 16 9.0525 mm² (2.55 mm × 3.55 mm)
  • Available as an integrated-inductor power module: TPSM8287A06, TPSM8287A10, TPSM8287A12, TPSM8287A15
  • Functional Safety-Capable
  • 2.7V to 6V input voltage range
  • 6A, 9A, 12A, 15A pin-to-pin device family
  • Four output voltage ranges:
    • 0.4V to 0.71875V in 1.25mV steps
    • 0.4V to 1.0375V in 2.5mV steps
    • 0.4V to 1.675V in 5mV steps
    • 0.8V to 3.35V in 10mV steps
  • Output voltage accuracy ±1%
  • Differential remote sensing
  • 7mΩ and 4.5mΩ internal power MOSFETs
  • Adjustable external compensation
  • Power-save or forced-PWM operation
  • Optional synchronization to external clock or spread-spectrum operation
  • I2C-compatible interface up to 1MHz
  • Stackable for increased output current capability
  • Thermal warning and thermal shutdown
  • Active output discharge
  • Power-good output with a window comparator
  • Available in 2.55mm × 3.55mm × 1mm VQFN package with wettable flanks
  • –40°C to 125°C junction temperature, TJ
  • Available as an integrated-inductor power module: TPSM8287A06, TPSM8287A10, TPSM8287A12, TPSM8287A15
  • Functional Safety-Capable
  • 2.7V to 6V input voltage range
  • 6A, 9A, 12A, 15A pin-to-pin device family
  • Four output voltage ranges:
    • 0.4V to 0.71875V in 1.25mV steps
    • 0.4V to 1.0375V in 2.5mV steps
    • 0.4V to 1.675V in 5mV steps
    • 0.8V to 3.35V in 10mV steps
  • Output voltage accuracy ±1%
  • Differential remote sensing
  • 7mΩ and 4.5mΩ internal power MOSFETs
  • Adjustable external compensation
  • Power-save or forced-PWM operation
  • Optional synchronization to external clock or spread-spectrum operation
  • I2C-compatible interface up to 1MHz
  • Stackable for increased output current capability
  • Thermal warning and thermal shutdown
  • Active output discharge
  • Power-good output with a window comparator
  • Available in 2.55mm × 3.55mm × 1mm VQFN package with wettable flanks
  • –40°C to 125°C junction temperature, TJ

The TPS6287x is a family of pin-to-pin 6A, 9A, 12A, and 15A synchronous step-down DC/DC converters with differential remote sensing. For each current rating, there are full-featured device variants with I2C interface and limited-featured device variants without I2C interface. All devices offer high efficiency and ease of use. Low-resistance power switches allow up to 15A continuous output current at high ambient temperatures.

The devices can operate in stacked mode to deliver higher output currents or to spread the power dissipation across multiple devices.

The TPS6287x family implements a fixed-frequency DCS-Control scheme that supports fast transients. The devices can operate in power save mode for maximum efficiency, or forced-PWM mode for the best transient performance and lowest output voltage ripple.

The remote sensing feature allows voltage regulation at the point-of-load, hence the device achieves better than ±1% DC voltage accuracy under all operating conditions.

The switching frequency is resistor-selectable through the FSEL pin. The switching frequency can be set to 1.5MHz, 2.25MHz, 2.5MHz, or 3.0MHz, or synchronized to an external clock in the same frequency range.

The I2C-compatible interface offers several control, monitoring, and warning features, such as voltage monitoring and temperature-related warnings. The output voltage can be quickly adjusted to adapt the power consumption of the load to the performance needs of the application through the I2C-compatible interface. The default start-up voltage is resistor-selectable through the VSEL pin.

The TPS6287x is a family of pin-to-pin 6A, 9A, 12A, and 15A synchronous step-down DC/DC converters with differential remote sensing. For each current rating, there are full-featured device variants with I2C interface and limited-featured device variants without I2C interface. All devices offer high efficiency and ease of use. Low-resistance power switches allow up to 15A continuous output current at high ambient temperatures.

The devices can operate in stacked mode to deliver higher output currents or to spread the power dissipation across multiple devices.

The TPS6287x family implements a fixed-frequency DCS-Control scheme that supports fast transients. The devices can operate in power save mode for maximum efficiency, or forced-PWM mode for the best transient performance and lowest output voltage ripple.

The remote sensing feature allows voltage regulation at the point-of-load, hence the device achieves better than ±1% DC voltage accuracy under all operating conditions.

The switching frequency is resistor-selectable through the FSEL pin. The switching frequency can be set to 1.5MHz, 2.25MHz, 2.5MHz, or 3.0MHz, or synchronized to an external clock in the same frequency range.

The I2C-compatible interface offers several control, monitoring, and warning features, such as voltage monitoring and temperature-related warnings. The output voltage can be quickly adjusted to adapt the power consumption of the load to the performance needs of the application through the I2C-compatible interface. The default start-up voltage is resistor-selectable through the VSEL pin.

下載 觀看有字幕稿的影片 影片

您可能會感興趣的類似產品

open-in-new 比較替代產品
功能相似於所比較的產品。
TPSM8287A10 現行 具有 I2C、頻率同步和遠端感測功能的 6V 輸入、10A 可並聯 DC/DC 降壓模組 Module with integrated inductor

技術文件

找不到結果。請清除您的搜尋條件,然後再試一次。
檢視所有 22
重要文件 類型 標題 格式選項 下載最新的英文版本 日期
* 資料表 TPS6287x 2.7V to 6V Input, 6A, 9A, 12A, 15A, Fast Transient Stackable Synchronous Step-Down Converters With I2 C Interface and Remote Sense datasheet (Rev. E) PDF | HTML 2025/10/9
類比設計期刊 固定頻率 DCS-Control:具有時脈同步的快速瞬態回應 PDF | HTML Download English Version PDF | HTML 2024/2/13
功能安全資訊 TPS6287x Functional Safety, FIT Rate, Failure Mode Distribution and Pin FMA PDF | HTML 2024/1/23
應用說明 QFN and SON PCB Attachment (Rev. C) PDF | HTML 2023/12/6
應用說明 Benefiting from Step-Down Converters with an I2C Communication Interface (Rev. B) PDF | HTML 2023/11/29
應用說明 AM68x Processor Power Solutions Using LP87334E PMIC for Industrial Applications PDF | HTML 2023/3/14
應用說明 Using the Filters with the DC/DC Step-Down Converter PDF | HTML 2023/2/2
應用說明 Operating TPS6287X-Q1 Devices in a Stacked Configuration PDF | HTML 2023/1/30
應用說明 Adjusting the Output Voltage of a Fixed Output Voltage DC-DC Converter PDF | HTML 2022/12/22
應用說明 Understanding SOA Curves to Operate at High Output Currents and Temperature PDF | HTML 2022/5/5
應用說明 Loop Gain Reconstruction of a Step-Down Converter from Output Impedance PDF | HTML 2022/1/20
應用說明 How to Measure Impedance of a Power Distribution Network of a DC-DC Converter PDF | HTML 2022/1/20
白皮書 Enabling Higher Data Rates for Optical Modules With Small and Efficient Power PDF | HTML 2021/3/22
白皮書 Benefits of a Resistor-to-Digital Converter in Ultra-Low Power Supplies 2019/10/14
類比設計期刊 Methods of output-voltage adjustment for DC/DC converters 2019/6/14
類比設計期刊 Achieving a clean startup by using a DC/DC converter with a precise enable-pin threshold 2017/10/24
類比設計期刊 Understanding frequency variation in the DCS-Control(TM) topology 2015/10/30
應用說明 Basic Calculation of a Buck Converter's Power Stage (Rev. B) PDF | HTML 2015/8/17
類比設計期刊 Five steps to a great PCB layout for a step-down converter 2015/1/29
類比設計期刊 High-efficiency, low-ripple DCS-Control offers seamless PWM/pwr-save transitions 2013/7/25
應用說明 Understanding the Absolute Maximum Ratings of the SW Node (Rev. A) 2012/1/13
應用說明 Choosing an Appropriate Pull-up/Pull-down Resistor for Open Drain Outputs 2011/9/19

設計與開發

如需其他條款或必要資源,請按一下下方的任何標題以檢視詳細頁面 (如有)。

開發板

TPS62873EVM-143 — TPS62873-Q1 評估模組 2.7-V 至 6-V 輸入降壓轉換器

TPS62873EVM-143 評估模組 (EVM) 的設計目的在於評估和測試 TPS62873-Q1 降壓轉換器的運作和功能性。亦可用於評估 TPS62870-Q1、TPS62871-Q1 及 TPS62872-Q1 裝置。EVM 可將 2.7-V 至 6.0-V 輸入電壓轉換為調節的 0.75-V 輸出電壓。對於 TPS62873EVM-143,輸出電流最高可達 15 A。

使用指南: PDF | HTML
支援產品和硬體
有庫存
限制:
??asset.out-of-stock-ti_zh_TW??
無法提供
開發板

TPS62873EVM-144 — TPS62873-Q1 30-A 降壓轉換器評估模組

TPS62873EVM-144 評估模組 (EVM) 是一款針對小型解決方案尺寸和高效率進行最佳化的高頻同步降壓轉換器。EVM 的設計旨在幫助使用者輕鬆評估及測試兩個 TPS62873 降壓轉換器的疊堆配置運作及功能性。其亦可用於評估此配置中的 TPS62870-Q1、TPS62871-Q1 及 TPS62872-Q1 裝置。EVM 可將 2.7-V 至 6.0-V 輸入電壓轉換為調節的 0.75-V 輸出電壓。此 EVM 的輸出電流最高可達 30-A。
使用指南: PDF | HTML
支援產品和硬體
有庫存
限制:
??asset.out-of-stock-ti_zh_TW??
無法提供
支援產品和硬體
支援產品和硬體
封裝 針腳 CAD 符號、佔位空間與 3D 模型
VQFN-FCRLF (RXS) 16 Ultra Librarian

訂購與品質

建議產品可能具有與此 TI 產品相關的參數、評估模組或參考設計。

支援與培訓

內含 TI 工程師技術支援的 TI E2E™ 論壇

內容係由 TI 和社群貢獻者依「現狀」提供,且不構成 TI 規範。檢視使用條款

若有關於品質、封裝或訂購 TI 產品的問題,請參閱 TI 支援。​​​​​​​​​​​​​​

影片