TPS63807

現行

2A、11-uA 靜態電流降壓-升壓轉換器

產品詳細資料

Iout (max) (A) 2 Vin (min) (V) 1.3 Vin (max) (V) 5.5 Topology Buck-Boost Type Converter Switching frequency (min) (kHz) 500 Switching frequency (max) (kHz) 3100 Features Enable, Light Load Efficiency, Load Disconnect, Output discharge, Power good, Pre-Bias Start-Up, Synchronous Rectification, UVLO Fixed Vout (min) (V) 1.8 Vout (max) (V) 5.2 Rating Catalog Operating temperature range (°C) -40 to 125 Iq (typ) (A) 0.000011
Iout (max) (A) 2 Vin (min) (V) 1.3 Vin (max) (V) 5.5 Topology Buck-Boost Type Converter Switching frequency (min) (kHz) 500 Switching frequency (max) (kHz) 3100 Features Enable, Light Load Efficiency, Load Disconnect, Output discharge, Power good, Pre-Bias Start-Up, Synchronous Rectification, UVLO Fixed Vout (min) (V) 1.8 Vout (max) (V) 5.2 Rating Catalog Operating temperature range (°C) -40 to 125 Iq (typ) (A) 0.000011
DSBGA (YFF) 15 3.08000000000000022 mm² 1.4000000000000001 x 2.2
  • Three pin-to-pin device options: TPS63805, TPS63806, and TPS63807 with specific application focus
  • Input voltage range: 1.3 V to 5.5 V
    • Device input voltage > 1.8 V for start-up
  • Output voltage range: 1.8 V to 5.2 V (adjustable)
  • High efficiency over the entire load range
    • Power save mode and mode selection for forced PWM-mode
  • Peak current buck-boost mode architecture
    • Defined transition points between buck, buck-boost, and boost operation modes
    • Forward and reverse current operation
    • Start-up into pre-biased outputs
  • Safety and robust operation features
    • Integrated soft start
    • Overtemperature- and overvoltage-protection
    • True shutdown function with load disconnect
    • Forward and backward current limit
  • TPS63805
    • Optimized for smallest solution size of 18.5 mm2 (works with a 22-µF minimum output capacitor)
    • 2-A output current for VI ≥ 2.3 V, VO = 3.3 V
    • 11-µA operating quiescent current
  • TPS63806
    • Optimized for best load step response (180-mV load-step response at a 2 A current step)
    • Up to 2.5-A transient output current
    • 13-µA operating quiescent current
  • TPS63807
    • Optimized for smallest solution size of 18.5 mm2 (works with a 22-µF minimum output capacitor)
    • 2-A output current for VI ≥ 2.3 V, VO = 3.3 V
    • 11-µA operating quiescent current
    • Output discharge feature when EN is low
    • 480-µs Tramp for small inrush current during start-up
  • Three pin-to-pin device options: TPS63805, TPS63806, and TPS63807 with specific application focus
  • Input voltage range: 1.3 V to 5.5 V
    • Device input voltage > 1.8 V for start-up
  • Output voltage range: 1.8 V to 5.2 V (adjustable)
  • High efficiency over the entire load range
    • Power save mode and mode selection for forced PWM-mode
  • Peak current buck-boost mode architecture
    • Defined transition points between buck, buck-boost, and boost operation modes
    • Forward and reverse current operation
    • Start-up into pre-biased outputs
  • Safety and robust operation features
    • Integrated soft start
    • Overtemperature- and overvoltage-protection
    • True shutdown function with load disconnect
    • Forward and backward current limit
  • TPS63805
    • Optimized for smallest solution size of 18.5 mm2 (works with a 22-µF minimum output capacitor)
    • 2-A output current for VI ≥ 2.3 V, VO = 3.3 V
    • 11-µA operating quiescent current
  • TPS63806
    • Optimized for best load step response (180-mV load-step response at a 2 A current step)
    • Up to 2.5-A transient output current
    • 13-µA operating quiescent current
  • TPS63807
    • Optimized for smallest solution size of 18.5 mm2 (works with a 22-µF minimum output capacitor)
    • 2-A output current for VI ≥ 2.3 V, VO = 3.3 V
    • 11-µA operating quiescent current
    • Output discharge feature when EN is low
    • 480-µs Tramp for small inrush current during start-up

The TPS63805, TPS63806, and TPS63807 are high efficiency, high output current buck-boost converters. Depending on the input voltage, they automatically operate in boost, buck, or in a novel 4-cycle buck-boost mode when the input voltage is approximately equal to the output voltage.

The TPS63805, TPS63806, and TPS63807 are high efficiency, high output current buck-boost converters. Depending on the input voltage, they automatically operate in boost, buck, or in a novel 4-cycle buck-boost mode when the input voltage is approximately equal to the output voltage.

下載 觀看有字幕稿的影片 影片

您可能會感興趣的類似產品

open-in-new 比較替代產品
引腳對引腳的功能與所比較的產品相同
TPS63806 現行 採用小巧 WCSP 具有最佳化的負載步進回應的 2.5A 高效降壓-升壓轉換器 Lower Iq
TPS63810 現行 適用於動態電壓負載,具有 I²C 介面的 2.5A 高效降壓-升壓轉換器 Without I2C
功能相同,但引腳輸出與所比較的產品不同
TPS631010 現行 3-A 尖峰電流高效率超小型解決方案尺寸降壓升壓轉換器 Upgraded product with 8-µA IQ and smaller WCSP package
TPS63901 現行 採用 WCSP 封裝、具 75-nA 運作 IQ 的 5.5-V 降壓升壓轉換器 Ultra low IQ and smaller size
功能相似於所比較的產品
TPS631000 現行 1.5-A 輸出電流、高功率密度降壓升壓轉換器 Upgraded product with 8-uA IQ and smaller SOT package.

技術文件

star =TI 所選的此產品重要文件
找不到結果。請清除您的搜尋條件,然後再試一次。
檢視所有 2
類型 標題 日期
* Data sheet TPS6380x High-Efficiency, Low IQ Buck-Boost Converter with Small Solution Size datasheet (Rev. E) PDF | HTML 2021年 8月 26日
Application note Different Methods to Drive LEDs Using TPS63XXX Buck-Boost Converters (Rev. D) 2021年 8月 4日

設計與開發

如需其他條款或必要資源,請按一下下方的任何標題以檢視詳細頁面 (如有)。

開發板

TPS63805EVM-026 — 高電流、高效率降壓-升壓轉換器評估模組

The TPS63805EVM-026 is designed to help the users easily evaluate and test the operation and functionality of the TPS63805 Buck-Boost Converter. The EVM operates from 1.3-V to 5.5-V input voltage. Output currents can go up to 2 A in buck mode and boost mode. The user can easily evaluate the (...)
使用指南: PDF
TI.com 無法提供
支援軟體

TIDCFU0 TIDA-050017 TEC Driver Software Example

支援產品和硬體

支援產品和硬體

產品
AC/DC & DC/DC converters (integrated FET)
TPS63802 採用 QFN/DFN 封裝的 2A 高效率、11-µA 靜態電流降壓升壓轉換器 TPS63805 具有小型解決方案尺寸的 2-A、高效率、11-µA 靜態電流降壓-升壓轉換器 TPS63807 2A、11-uA 靜態電流降壓-升壓轉換器
模擬型號

TPS63805 Unencrypted PSpice Transient Model Package (Rev. B)

SLVMCQ6B.ZIP (50 KB) - PSpice Model
計算工具

SLVC808 Battery Lifetime Estimator

支援產品和硬體

支援產品和硬體

產品
AC/DC & DC/DC converters (integrated FET)
TPS63000 採用 3x3 QFN,具有 1.8A 電流開關的高效降壓-升壓轉換器 TPS63000-Q1 車用 1.8V 至 5.5V 輸入範圍、1.8A 高效降壓/升壓轉換器 TPS63001 採用 3x3 QFN 封裝,具有 1.7A 電流開關、3.3V 固定輸出電壓的 96% 降壓-升壓轉換器 TPS63002 採用 3x3 QFN 封裝,具有 1.7A 電流開關、5V 固定輸出電壓的 96% 降壓-升壓轉換器 TPS63010 有 2-A 開關的高效率、單電感器、降壓升壓轉換器 TPS63011 有 2-A 開關的高效率、單電感器、降壓升壓轉換器 TPS63012 有 2-A 開關的高效率、單電感器、降壓升壓轉換器 TPS63020 具 4A 開關的高效率、單電感器、降壓升壓轉換器 TPS63020-Q1 具 4A 開關的高效率車用單電感器降壓升壓轉換器 TPS63021 具 4A 開關的高效率、單電感器、降壓升壓轉換器 TPS63024 高效率 1.5A 單電感器降壓-升壓轉換器 TPS630241 高效率 1.5A 單電感器降壓-升壓轉換器 TPS630242 高效率 1.5A 單電感器降壓-升壓轉換器 TPS630250 採用 3.7 mm² DSBGA 封裝的 4-A 開關單電感器降壓-升壓轉換器 TPS630251 採用 WCSP 的 4A 開關單電感器降壓-升壓轉換器 TPS630252 採用 WCSP 的 4A 開關單電感器降壓-升壓轉換器 TPS63027 高效率 4.5A 開關單電感器降壓-升壓轉換器 TPS63030 有 1-A 開關的高效率、單電感器、降壓升壓轉換器 TPS63031 有 1-A 開關的高效率、單電感器、降壓升壓轉換器 TPS63036 有 1-A 開關的高效率、單電感器、降壓升壓轉換器 TPS63050 具 1-A 開關和可調式緩啓動的 TPS6305x 單電感器降壓升壓 TPS63051 小型單電感器降壓/升壓轉換器 TPS63060 2.5V 至 12V 輸入電壓、93% 效率、2.25A 開關電流限制、降壓升壓轉換器 TPS63060-EP 具 2-A 開關電流的高輸入電壓降壓升壓轉換器 TPS63061 2.5V 至 12V 輸入電壓、93% 效率、2.25A 開關電流限制、降壓升壓轉換器 TPS63070 寬輸入電壓 (2V-16V) 降壓-升壓轉換器 TPS63700 採用 3x3 QFN 封裝的可調式 -15V 輸出反向 DC/DC 轉換器 TPS63710 採用 3x3 WSON 封裝的低雜訊、1A 同步反向降壓轉換器 TPS63802 採用 QFN/DFN 封裝的 2A 高效率、11-µA 靜態電流降壓升壓轉換器 TPS63805 具有小型解決方案尺寸的 2-A、高效率、11-µA 靜態電流降壓-升壓轉換器 TPS63806 採用小巧 WCSP 具有最佳化的負載步進回應的 2.5A 高效降壓-升壓轉換器 TPS63807 2A、11-uA 靜態電流降壓-升壓轉換器 TPS63810 適用於動態電壓負載,具有 I²C 介面的 2.5A 高效降壓-升壓轉換器 TPS63811 適用於動態電壓負載,具有 I²C 介面的 2.5A 高效降壓-升壓轉換器 TPS63900 具有輸入電流限制和動態電壓調整功能的 1.8V 至 5.5V、75nA IQ 降壓/升壓轉換器
封裝 引腳 下載
DSBGA (YFF) 15 檢視選項

訂購與品質

內含資訊:
  • RoHS
  • REACH
  • 產品標記
  • 鉛塗層/球物料
  • MSL 等級/回焊峰值
  • MTBF/FIT 估算值
  • 材料內容
  • 資格摘要
  • 進行中可靠性監測
內含資訊:
  • 晶圓廠位置
  • 組裝地點

支援與培訓

內含 TI 工程師技術支援的 TI E2E™ 論壇

內容係由 TI 和社群貢獻者依「現狀」提供,且不構成 TI 規範。檢視使用條款

若有關於品質、封裝或訂購 TI 產品的問題,請參閱 TI 支援。​​​​​​​​​​​​​​

影片