TPS631010

現行

3-A 尖峰電流高效率超小型解決方案尺寸降壓升壓轉換器

產品詳細資料

Iout (max) (A) 2 Vin (min) (V) 1.6 Vin (max) (V) 5.5 Topology Buck-Boost Type Converter Switching frequency (min) (kHz) 1800 Switching frequency (max) (kHz) 2200 Features Enable, Light Load Efficiency, Load Disconnect, Synchronous Rectification, UVLO Fixed Vout (min) (V) 1.2 Vout (max) (V) 5.5 Rating Catalog Operating temperature range (°C) -40 to 125 Iq (typ) (A) 0.000008
Iout (max) (A) 2 Vin (min) (V) 1.6 Vin (max) (V) 5.5 Topology Buck-Boost Type Converter Switching frequency (min) (kHz) 1800 Switching frequency (max) (kHz) 2200 Features Enable, Light Load Efficiency, Load Disconnect, Synchronous Rectification, UVLO Fixed Vout (min) (V) 1.2 Vout (max) (V) 5.5 Rating Catalog Operating temperature range (°C) -40 to 125 Iq (typ) (A) 0.000008
DSBGA (YBG) 8 1.752689 mm² 1.783 x 0.983
  • 1.6-V to 5.5-V input voltage range
    • Device input voltage > 1.65 V for start-up
  • 1.2-V to 5.5-V output voltage range(adjustable)
    • 1.0-V V OUT is supported in PFM mode
  • High output current capability, 3-A peak switch current
    • 2-A output current for V IN ≥ 3 V, V OUT = 3.3 V
    • 1.5-A output current for V IN ≥ 2.7 V, V OUT = 3.3 V
  • Active output discharge (TPS631011 only)
  • High efficiency over the entire load range
    • 8-µA typical quiescent current
    • Automatic power save mode and forced PWM mode configurable
  • Peak current buck-boost mode architecture
    • Seamless mode transition
    • Forward and reverse current operation
    • Start-up into pre-biased outputs
    • Fixed-frequency operation with 2-MHz switching
  • Safety and robust operation features
    • Overcurrent protection and short-circuit protection
    • Integrated soft start with active ramp adoption
    • Overtemperature protection and overvoltage protection
    • True shutdown function with load disconnect
    • Forward and backward current limit
  • Small solution size
    • Small 1-µH inductor
    • 1.803-mm × 0.905-mm in WCSP
  • 1.6-V to 5.5-V input voltage range
    • Device input voltage > 1.65 V for start-up
  • 1.2-V to 5.5-V output voltage range(adjustable)
    • 1.0-V V OUT is supported in PFM mode
  • High output current capability, 3-A peak switch current
    • 2-A output current for V IN ≥ 3 V, V OUT = 3.3 V
    • 1.5-A output current for V IN ≥ 2.7 V, V OUT = 3.3 V
  • Active output discharge (TPS631011 only)
  • High efficiency over the entire load range
    • 8-µA typical quiescent current
    • Automatic power save mode and forced PWM mode configurable
  • Peak current buck-boost mode architecture
    • Seamless mode transition
    • Forward and reverse current operation
    • Start-up into pre-biased outputs
    • Fixed-frequency operation with 2-MHz switching
  • Safety and robust operation features
    • Overcurrent protection and short-circuit protection
    • Integrated soft start with active ramp adoption
    • Overtemperature protection and overvoltage protection
    • True shutdown function with load disconnect
    • Forward and backward current limit
  • Small solution size
    • Small 1-µH inductor
    • 1.803-mm × 0.905-mm in WCSP

The TPS631010 and TPS631011 are constant frequency peak current mode control buck-boost converters in tiny wafer chip scale package. They have a 3-A peak current limit (typical) and 1.6-V to 5.5-V input voltage range, and provide a power supply solution for system pre-regulators and voltage stabilizers.

Depending on the input voltage, the TPS631010 and TPS631011 automatically operate in boost, buck, or in 3-cycle buck-boost mode when the input voltage is approximately equal to the output voltage. The transitions between modes happen at a defined duty cycle and avoid unwanted toggling within the modes to reduce output voltage ripple. 8-µA quiescent current and power save mode enable the highest efficiency for light to no-load conditions.

The devices offer a very small solution size in WCSP.

The TPS631010 and TPS631011 are constant frequency peak current mode control buck-boost converters in tiny wafer chip scale package. They have a 3-A peak current limit (typical) and 1.6-V to 5.5-V input voltage range, and provide a power supply solution for system pre-regulators and voltage stabilizers.

Depending on the input voltage, the TPS631010 and TPS631011 automatically operate in boost, buck, or in 3-cycle buck-boost mode when the input voltage is approximately equal to the output voltage. The transitions between modes happen at a defined duty cycle and avoid unwanted toggling within the modes to reduce output voltage ripple. 8-µA quiescent current and power save mode enable the highest efficiency for light to no-load conditions.

The devices offer a very small solution size in WCSP.

下載 觀看有字幕稿的影片 影片

您可能會感興趣的類似產品

open-in-new 比較替代產品
引腳對引腳的功能與所比較的產品相同
最新 TPS631011 現行 1.5-A 輸出電流降壓升壓轉換器 Similar specification, but non-I2C version
最新 TPS631013 現行 採用 WCSP 且具 I2C 的 1.6-V 至 5.5-V 輸入電壓 1.5-A 降壓升壓轉換器 Similar specification, but with I2C version

技術文件

star =TI 所選的此產品重要文件
找不到結果。請清除您的搜尋條件,然後再試一次。
檢視所有 3
類型 標題 日期
* Data sheet TPS631010 and TPS631011 1.5-A Output Current, Buck-Boost Converters in Small Wafer Chip Scale Package datasheet (Rev. A) PDF | HTML 2023年 8月 2日
Certificate TPS631010EVM-109 EU RoHS Declaration of Conformity (DoC) 2022年 12月 15日
EVM User's guide TPS631010EVM User's Guide PDF | HTML 2022年 10月 14日

設計與開發

如需其他條款或必要資源,請按一下下方的任何標題以檢視詳細頁面 (如有)。

開發板

TPS631010EVM — 適用於 1.5-A 高效率小型解決方案尺寸降壓-升壓轉換器的 TPS631010 評估模組

TPS631010 是高效率同步降壓升壓轉換器。

TPS631010EVM-109 的設計旨在幫助使用者輕鬆評估及測試 TPS631010 降壓升壓轉換器的運作及功能性。

使用指南: PDF | HTML
TI.com 無法提供
封裝 引腳 下載
DSBGA (YBG) 8 檢視選項

訂購與品質

內含資訊:
  • RoHS
  • REACH
  • 產品標記
  • 鉛塗層/球物料
  • MSL 等級/回焊峰值
  • MTBF/FIT 估算值
  • 材料內容
  • 資格摘要
  • 進行中可靠性監測
內含資訊:
  • 晶圓廠位置
  • 組裝地點

支援與培訓

內含 TI 工程師技術支援的 TI E2E™ 論壇

內容係由 TI 和社群貢獻者依「現狀」提供,且不構成 TI 規範。檢視使用條款

若有關於品質、封裝或訂購 TI 產品的問題,請參閱 TI 支援。​​​​​​​​​​​​​​

影片