首頁 電源管理 多通道 IC (PMIC)
首頁
電源管理
多通道 IC (PMIC)

TPS65216

現行

適用於 ARM® Cortex™-A8/A9 SOC 和 FPGA 的整合電源管理 IC (PMIC)

立即訂購
產品規格表

TPS65216

現行
產品規格表 立即訂購

產品詳細資料

Processor supplier Texas Instruments Processor name Sitara AM335x, Sitara AM43x, Sitara AMIC110, Sitara AMIC120 Product type Processor and FPGA Regulated outputs (#) 5 Step-down DC/DC converter 4 Step-up DC/DC converter 0 LDO 1 Vin (min) (V) 1.8 Vin (max) (V) 5.5 Vout (min) (V) -0.3 Vout (max) (V) 7 Iout (max) (A) 1.8 Configurability Factory programmable, Software configurable Features Dynamic voltage scaling, Eco-mode, I2C control, Overcurrent protection, Power good, Power sequencing, Power supply and system monitoring, Thermal shutdown, UVLO adjustable Rating Catalog Operating temperature range (°C) -40 to 105 Step-down DC/DC controller 0 Step-up DC/DC controller 0 Iq (typ) (mA) 0.22 Switching frequency (max) (kHz) 2400 Shutdown current (ISD) (typ) (µA) 5 Switching frequency (typ) (kHz) 2400
Processor supplier Texas Instruments Processor name Sitara AM335x, Sitara AM43x, Sitara AMIC110, Sitara AMIC120 Product type Processor and FPGA Regulated outputs (#) 5 Step-down DC/DC converter 4 Step-up DC/DC converter 0 LDO 1 Vin (min) (V) 1.8 Vin (max) (V) 5.5 Vout (min) (V) -0.3 Vout (max) (V) 7 Iout (max) (A) 1.8 Configurability Factory programmable, Software configurable Features Dynamic voltage scaling, Eco-mode, I2C control, Overcurrent protection, Power good, Power sequencing, Power supply and system monitoring, Thermal shutdown, UVLO adjustable Rating Catalog Operating temperature range (°C) -40 to 105 Step-down DC/DC controller 0 Step-up DC/DC controller 0 Iq (typ) (mA) 0.22 Switching frequency (max) (kHz) 2400 Shutdown current (ISD) (typ) (µA) 5 Switching frequency (typ) (kHz) 2400
VQFN (RSL) 48 36 mm² (6 mm × 6 mm)
  • Three adjustable step-down converters with integrated switching FETs (DCDC1, DCDC2, and DCDC3):
    • DCDC1: 1.1V default, up to 1.8A
    • DCDC2: 1.1V default, up to 1.8A
    • DCDC3: 1.1V default, up to 1.8A
    • VIN range from 2.7V to 5.5V
    • Adjustable output voltage range 0.85V to 1.675V (DCDC1 and DCDC2)
    • Adjustable output voltage range 0.9V to 3.4V (DCDC3)
    • Power save mode at light load current
    • 100% duty cycle for lowest dropout
    • Active output-discharge when disabled
  • One adjustable buck-boost converter with integrated switching FETs (DCDC4):
    • DCDC4: 3.3V default, up to 1.6A
    • VIN range from 2.7V to 5.5V
    • Adjustable output voltage range from 1.175V to 3.4V
    • Active output-discharge when disabled
  • Adjustable general-purpose LDO (LDO1)
    • LDO1: default up to 400mA
    • VIN range from 1.8V to 5.5V
    • Adjustable output voltage range from 0.9V to 3.4V
    • Active output-discharge when disabled
  • High-voltage load switch (LS) With 100mA or 500mA selectable current limit
    • VIN range from 1.8V to 10V
    • 500mΩ (max) switch impedance
  • Supervisor with built-in supervisor function monitors
    • DCDC1, DCDC2 ±4% tolerance
    • DCDC3, DCDC4 ±5% tolerance
    • LDO1 ±5% tolerance
  • Protection, diagnostics, and control:
    • Undervoltage lockout (UVLO)
    • Always-on push-button monitor
    • Overtemperature warning and shutdown
    • I2C interface (address 0x24) (see Timing Requirements for I2C operation at 400kHz)
  • Three adjustable step-down converters with integrated switching FETs (DCDC1, DCDC2, and DCDC3):
    • DCDC1: 1.1V default, up to 1.8A
    • DCDC2: 1.1V default, up to 1.8A
    • DCDC3: 1.1V default, up to 1.8A
    • VIN range from 2.7V to 5.5V
    • Adjustable output voltage range 0.85V to 1.675V (DCDC1 and DCDC2)
    • Adjustable output voltage range 0.9V to 3.4V (DCDC3)
    • Power save mode at light load current
    • 100% duty cycle for lowest dropout
    • Active output-discharge when disabled
  • One adjustable buck-boost converter with integrated switching FETs (DCDC4):
    • DCDC4: 3.3V default, up to 1.6A
    • VIN range from 2.7V to 5.5V
    • Adjustable output voltage range from 1.175V to 3.4V
    • Active output-discharge when disabled
  • Adjustable general-purpose LDO (LDO1)
    • LDO1: default up to 400mA
    • VIN range from 1.8V to 5.5V
    • Adjustable output voltage range from 0.9V to 3.4V
    • Active output-discharge when disabled
  • High-voltage load switch (LS) With 100mA or 500mA selectable current limit
    • VIN range from 1.8V to 10V
    • 500mΩ (max) switch impedance
  • Supervisor with built-in supervisor function monitors
    • DCDC1, DCDC2 ±4% tolerance
    • DCDC3, DCDC4 ±5% tolerance
    • LDO1 ±5% tolerance
  • Protection, diagnostics, and control:
    • Undervoltage lockout (UVLO)
    • Always-on push-button monitor
    • Overtemperature warning and shutdown
    • I2C interface (address 0x24) (see Timing Requirements for I2C operation at 400kHz)

The TPS65216 is a single chip, power-management IC (PMIC) specifically designed to support the AMIC110, AMIC120, AM335x, and AM437x line of processors in line-powered (5V) applications. The device is characterized across a –40°C to +105°C temperature range, making it suitable for various industrial applications.

The TPS65216 is specifically designed to provide power management for all the functionalities of the AMIC110, AMIC120, AM335x, and AM437x. The DC/DC converters DCDC1 through DCDC4 are intended to power the core, MPU, DDR memory, and 3.3V analog and I/O, respectively. LDO1 provides the 1.8V analog and I/O for the processor. GPIO2 allows for warm reset of the DCDC1 and DCDC2 converters. The I2C interface allows the user to enable and disable all voltage regulators, the load switch, and GPIOs. Additionally, UVLO and supervisor voltage thresholds, power-up sequence, and power-down sequence can be programmed through I2C. Interrupts for overtemperature, overcurrent, and undervoltage can be monitored as well. The supervisor monitors DCDC1 through DCDC4 and LDO1. The supervisor has two settings, one for typical undervoltage tolerance (STRICT = 0b), and one for tight undervoltage and overvoltage tolerances (STRICT = 1b). A power-good signal indicates proper regulation of the five voltage regulators.

The TPS65216 device is available in a 48-pin VQFN package (6mm × 6mm, 0.4mm pitch).

The TPS65216 is a single chip, power-management IC (PMIC) specifically designed to support the AMIC110, AMIC120, AM335x, and AM437x line of processors in line-powered (5V) applications. The device is characterized across a –40°C to +105°C temperature range, making it suitable for various industrial applications.

The TPS65216 is specifically designed to provide power management for all the functionalities of the AMIC110, AMIC120, AM335x, and AM437x. The DC/DC converters DCDC1 through DCDC4 are intended to power the core, MPU, DDR memory, and 3.3V analog and I/O, respectively. LDO1 provides the 1.8V analog and I/O for the processor. GPIO2 allows for warm reset of the DCDC1 and DCDC2 converters. The I2C interface allows the user to enable and disable all voltage regulators, the load switch, and GPIOs. Additionally, UVLO and supervisor voltage thresholds, power-up sequence, and power-down sequence can be programmed through I2C. Interrupts for overtemperature, overcurrent, and undervoltage can be monitored as well. The supervisor monitors DCDC1 through DCDC4 and LDO1. The supervisor has two settings, one for typical undervoltage tolerance (STRICT = 0b), and one for tight undervoltage and overvoltage tolerances (STRICT = 1b). A power-good signal indicates proper regulation of the five voltage regulators.

The TPS65216 device is available in a 48-pin VQFN package (6mm × 6mm, 0.4mm pitch).
filter 尋找其它 多通道 IC (PMIC)
下載 觀看有字幕稿的影片 影片

您可能會感興趣的類似產品

open-in-new 比較替代產品
針腳對針腳的功能與所比較的裝置相同。
TPS65218D0 現行 適用於 ARM® Cortex™-A8/A9 SOC 和 FPGA 的整合電源管理 IC (PMIC) Drop in replacement with higher functionality
功能相似於所比較的產品。
TPS65219 現行 適用於 Arm® Cortex®-A53 處理器和 FPGA 的整合式電源管理 (PMIC) TPS65219 has higher current capability, more LDOs, supports lower output voltages, has no Buck-Boost and a smaller package size

技術文件

找不到結果。請清除您的搜尋條件，然後再試一次。
檢視所有 3
重要文件 類型 標題 格式選項 下載最新的英文版本 日期
* 資料表 TPS65216 Power Management IC (PMIC) With 4 DC/DC Converters, 1 LDO, and Integrated Power Sequencing datasheet (Rev. C) PDF | HTML 2026/6/12
應用說明 AM335x PMIC Selection Guide (Rev. A) 2019/9/19
使用指南 Powering AMIC110, AMIC120, AM335x, and AM437x with TPS65216 PDF | HTML 2019/4/11

設計與開發

電源供應解決方案

探索包括 TPS65216 的解決方案。TI 提供適用於 TI 與非 TI 之系統單晶片 (SoC)、處理器、微控制器、感測器或現場可編程邏輯閘陣列 (FPGA) 的電源供應解決方案。

檢視解決方案
開發板

TPS65218EVM-100 — TPS65218 評估模組

TPS65218EVM 是一個已完成組裝的平台，用於評估 TPS65218 電源管理裝置的性能。

使用指南: PDF | HTML
支援產品和硬體
有庫存
限制：
??asset.out-of-stock-ti_zh_TW??
無法提供
模擬型號

TPS65218xx PSpice Transient Model

SLDM022.ZIP (1460 KB) - PSpice 模型
支援產品和硬體
參考設計

TIDA-010011 — 用於保護繼電器處理器模組的高效電源供應架構參考設計

此參考設計展示各種電源架構，可為需要 >1A 負載電流和高效率的應用處理器模組產生多重電壓軌。所需的電源是使用來自背板的 5、12 或 24-V DC 輸入所產生。電源供應器是使用配備整合式 FET 的 DC-DC 轉換器，以及具尺寸整合式電感器的電源模組所產生。此設計採用 HotRod™ 封裝類型，適合需要低 EMI 的應用。此外也最適合設計時間有限的應用。其他功能包括 DDR 終端穩壓器、輸入電源 OR-ing、電壓序列、用於過載保護的 eFuse，以及電壓和負載電流監控。此設計可搭配處理器、數位訊號處理器以及現場可編程邏輯閘陣列使用。已通過輻射發射測試，符合 A 類和 B 要求的 (...)
支援產品和硬體
參考設計

TIPA-050052 — 使用 TPS65216 PMIC 的 AMIC110、AMIC120、AM335x 和 AM437x 電源供應設計

此電源供應設計說明可為 AMIC110、AMIC120、AM335x 和 AM437x 處理器供電的最佳化電源管理 IC (PMIC)。TPS65216 為單晶片電源 IC (PMIC)，專為支援線路供電 (5V) 應用中的 AMIC110、AMIC120、AM335x 和 AM437x 處理器產線而設計。本裝置的特性為涵蓋 -40°C 至 +105°C 溫度範圍，因此適合各種工業應用。
TPS65216 專為提供 AMIC110、AMIC120、AM335x 和 AM437x 所有功能的電源管理而設計。DC/DC 轉換器 DCDC1 至 DCDC4 分別用於為核心，MPU、DDR 記憶體和 (...)

支援產品和硬體
封裝 針腳 CAD 符號、佔位空間與 3D 模型
VQFN (RSL) 48 Ultra Librarian
適用 TI 的評估品項標準條款與條件。

訂購與品質

建議產品可能具有與此 TI 產品相關的參數、評估模組或參考設計。

支援與培訓

內含 TI 工程師技術支援的 TI E2E™ 論壇

以英文檢視所有論壇主題

內容係由 TI 和社群貢獻者依「現狀」提供，且不構成 TI 規範。檢視使用條款。

若有關於品質、封裝或訂購 TI 產品的問題，請參閱 TI 支援。​​​​​​​​​​​​​​

影片