首頁 電源管理 DC/DC 切換穩壓器 DC/DC 轉換器

TPS65233

現行

具 I2C 介面電源管理 IC (PMIC) 的 LNB 電壓穩壓器

產品詳細資料

Rating Catalog Topology Buck Iout (max) (A) 1 Vin (max) (V) 20 Vin (min) (V) 4.5 Vout (max) (V) 18.6 Vout (min) (V) 13.4 Features Comm control, Enable, Overcurrent protection, Thermal shutdown Operating temperature range (°C) -40 to 85 Iq (typ) (A) 0.025
Rating Catalog Topology Buck Iout (max) (A) 1 Vin (max) (V) 20 Vin (min) (V) 4.5 Vout (max) (V) 18.6 Vout (min) (V) 13.4 Features Comm control, Enable, Overcurrent protection, Thermal shutdown Operating temperature range (°C) -40 to 85 Iq (typ) (A) 0.025
WQFN (RTE) 16 9 mm² (3 mm × 3 mm)
  • Complete Integration Solution for LNB and I2C
  • DiSEqC 1.x Compatible
  • Supports 5-V and 12-V Power Bus
  • Up to 1000-mA Accurate Output Current Limit
    Adjustable by External Resistor and I2C
  • Boost Converter With Low
    Rdson Internal Power Switch
  • Dedicated Enable Pin for
    Non-I2C Application
  • Low Noise, Low Drop Output With
    Push-Pull Output Stage
  • Built-In Accurate 22-kHz Tone Generator
    or External Pin
  • Adjustable Soft-Start and 13-V/18-V Voltage
    Transition Time
  • Compliant with main satellite receiver systems
    Specifications
  • LNB Short Circuit Dynamic Pprotection
  • Diagnostics for Output Voltage Level,
    Input Supply UVLO, and DiSEqC Tone Output
  • Cable Disconnect Diagnostic
  • Available in a 16-Pin QFN 3-mm × 3-mm (RTE) Package
  • Complete Integration Solution for LNB and I2C
  • DiSEqC 1.x Compatible
  • Supports 5-V and 12-V Power Bus
  • Up to 1000-mA Accurate Output Current Limit
    Adjustable by External Resistor and I2C
  • Boost Converter With Low
    Rdson Internal Power Switch
  • Dedicated Enable Pin for
    Non-I2C Application
  • Low Noise, Low Drop Output With
    Push-Pull Output Stage
  • Built-In Accurate 22-kHz Tone Generator
    or External Pin
  • Adjustable Soft-Start and 13-V/18-V Voltage
    Transition Time
  • Compliant with main satellite receiver systems
    Specifications
  • LNB Short Circuit Dynamic Pprotection
  • Diagnostics for Output Voltage Level,
    Input Supply UVLO, and DiSEqC Tone Output
  • Cable Disconnect Diagnostic
  • Available in a 16-Pin QFN 3-mm × 3-mm (RTE) Package

Designed for analog and digital satellite receivers, the TPS65233 is a monolithic voltage regulator with I2C interface, specifically to provide the 13-V/18-V power supply and the 22-kHz tone signaling to the LNB down-converter in the antenna dish or to the multi-switch box. It offers a complete solution with very low component count, low power dissipation together with simple design and I2C standard interfacing.

TPS65233 features high power efficiency. The boost converter integrates a 120-mΩ power MOSFET running at 500-kHz switching frequency. Drop out voltage at the linear regulator is 0.8 V to minimize power loss. TPS65233 provides multiple ways to generate the 22-kHz signal. Integrated linear regulator with push-pull output stage generates clean 22-kHz tone signal superimposed at the output even at zero loading. Current limit of linear regulator can be programmed by external resistor with ±10% accuracy. Full range of diagnostic read by I2C is available for system monitoring.

The part is available in a 16-pin QFN 3-mm × 3-mm (RTE) package.

Designed for analog and digital satellite receivers, the TPS65233 is a monolithic voltage regulator with I2C interface, specifically to provide the 13-V/18-V power supply and the 22-kHz tone signaling to the LNB down-converter in the antenna dish or to the multi-switch box. It offers a complete solution with very low component count, low power dissipation together with simple design and I2C standard interfacing.

TPS65233 features high power efficiency. The boost converter integrates a 120-mΩ power MOSFET running at 500-kHz switching frequency. Drop out voltage at the linear regulator is 0.8 V to minimize power loss. TPS65233 provides multiple ways to generate the 22-kHz signal. Integrated linear regulator with push-pull output stage generates clean 22-kHz tone signal superimposed at the output even at zero loading. Current limit of linear regulator can be programmed by external resistor with ±10% accuracy. Full range of diagnostic read by I2C is available for system monitoring.

The part is available in a 16-pin QFN 3-mm × 3-mm (RTE) package.

下載 觀看有字幕稿的影片 影片

您可能會感興趣的類似產品

open-in-new 比較替代產品
針腳對針腳的功能與所比較的裝置相同。
TPS65233-1 現行 具 1MHz I2C 介面電源管理 IC (PMIC) 的 LNB 電壓穩壓器 Same functionality, pin-to-pin but 1.0-MHz switching frequency

技術文件

找不到結果。請清除您的搜尋條件,然後再試一次。
檢視所有 2
重要文件 類型 標題 格式選項 下載最新的英文版本 日期
* 資料表 LNB Voltage Regulator With I2C Interface datasheet (Rev. A) 2013/9/24
應用說明 LNB design considerations on TPS65233, TPS65235 PDF | HTML 2017/9/25

設計與開發

如需其他條款或必要資源,請按一下下方的任何標題以檢視詳細頁面 (如有)。

開發板

TPS65233EVM — 具有 I2C 介面的 TPS65233 LNB 電壓穩壓器評估模組

The Texas Instruments TPS65233EVM evaluation module (EVM) helps designers evaluate the performance of the TPS65233 LNB Voltage Regulator with I2C Interface. Designed for analog and digital satellite receivers, the TPS65233 is a monolithic voltage regulator. It includes an I2C interface to provide (...)
使用指南: PDF
支援產品和硬體
有庫存
限制:
??asset.out-of-stock-ti_zh_TW??
無法提供
開發模組 (EVM) 的 GUI

SLVC515 — TPS65233

支援產品和硬體
封裝 針腳 CAD 符號、佔位空間與 3D 模型
WQFN (RTE) 16 Ultra Librarian

訂購與品質

建議產品可能具有與此 TI 產品相關的參數、評估模組或參考設計。

支援與培訓

內含 TI 工程師技術支援的 TI E2E™ 論壇

內容係由 TI 和社群貢獻者依「現狀」提供,且不構成 TI 規範。檢視使用條款

若有關於品質、封裝或訂購 TI 產品的問題,請參閱 TI 支援。​​​​​​​​​​​​​​

影片