現在提供此產品的更新版本
TPS7A7200
- Low-dropout voltage: 180 mV at 2 A
- VIN range: 1.5 V to 6.5 V
- Configurable fixed VOUT range: 0.9 V to 3.5 V
- Adjustable VOUT range: 0.9 V to 5 V
- Very good load- and line-transient response
- Stable with ceramic output capacitor
- 1.5% accuracy overline, overload, and overtemperature
- Programmable soft-start
- Power-good (PG) output
- Packages:
- 3-mm × 3-mm, 16-pin VQFN
- 5-mm × 5-mm, 20-pin VQFN
The TPS7A7200 low-dropout (LDO) voltage regulator is designed for applications requiring very-low dropout capability (180 mV at 2 A) with an input voltage from 1.5 V to 6.5 V. The TPS7A7200 offers an innovative, user-configurable, output-voltage setting from 0.9 V to 3.5 V, thus eliminating external resistors and any associated errors.
The TPS7A7200 has very fast load-transient response, is stable with ceramic output capacitors, and supports a better than 2% accuracy over line, load, and temperature. A soft-start pin allows for an application to reduce inrush into the load. Additionally, an open-drain, power-good signal allows for sequencing power rails.
The TPS7A7200 is available in 3-mm × 3-mm, 16-pin VQFN and 5-mm × 5-mm, 20-pin VQFN packages.
技術文件
| 類型 | 標題 | 日期 | ||
|---|---|---|---|---|
| * | Data sheet | TPS7A7200 2-A, Fast-Transient, Low-Dropout Voltage Regulator datasheet (Rev. G) | PDF | HTML | 2023年 10月 30日 |
| White paper | Parallel LDO Architecture Design Using Ballast Resistors | PDF | HTML | 2022年 12月 14日 | |
| White paper | Comprehensive Analysis and Universal Equations for Parallel LDO's Using Ballast | PDF | HTML | 2022年 12月 13日 | |
| Selection guide | Low Dropout Regulators Quick Reference Guide (Rev. P) | 2018年 3月 21日 | ||
| Application note | ANY-OUT™ LDO Controlled by I2C™ IO Expander Device (Rev. A) | 2012年 9月 20日 | ||
| Application note | ANY-OUT™ LDO Controlled by I2C™ IO Expander Device | 2012年 5月 29日 | ||
| User guide | TPS7A7x00EVM-718 Evaluation Module | 2012年 2月 28日 |
設計與開發
如需其他條款或必要資源,請按一下下方的任何標題以檢視詳細頁面 (如有)。
TPS7A7200EVM-718 — TPS7A7200 低壓差 (LDO) 線性穩壓器評估模組
TIDA-01161 — 1 GHz 訊號頻寬射頻取樣接收器參考設計
此參考設計採用雙通道、14 位元解析度 ADC、取樣率高達 3GSPS 的 ADC32RF45。最大訊號頻寬由 ADC 取樣率除以二得出。在此參考設計中,訊號頻寬超過 1GHz。最大輸入頻率按照 ADC 和輸入變壓器輸入緩衝器的輸入頻寬設定。此參考設計可直接擷取高達 4GHz 的 RF 訊號,適用於所有重要電信頻帶和 S (...)
TIDA-01442 — 採用 ADC12DJ3200 且適用於 L、S、C 和 X 波段的直接射頻取樣雷達接收器參考設計
TIDA-01163 — 多波段射頻取樣接收器參考設計
此參考設計展示 ADC32RF80 雙通道、14 位元、3-GSPS RF 取樣電信接收器。此裝置每個通道包含兩個數位降頻轉換器 (DDC)。DDC 提供 8 到 32 的抽取值,並包含 16 位元數值控制。利用 ADC32RF80 的高取樣率,參考設計可擷取到大量 RF 頻譜,其中包含多頻帶的訊號和潛在的不良干擾。DDC (...)
TIDA-01016 — 訊號分析儀和無線測試器中射頻取樣 ADC 的時鐘參考設計
TIDA-00814 — 射頻取樣 S 波段雷達接收器參考設計
| 封裝 | 針腳 | CAD 符號、佔位空間與 3D 模型 |
|---|---|---|
| VQFN (RGT) | 16 | Ultra Librarian |
| VQFN (RGW) | 20 | Ultra Librarian |
訂購與品質
- RoHS
- REACH
- 產品標記
- 鉛塗層/球物料
- MSL 等級/回焊峰值
- MTBF/FIT 估算值
- 材料內容
- 認證摘要
- 進行中持續性的可靠性監測
- 晶圓廠位置
- 組裝地點
建議產品可能具有與此 TI 產品相關的參數、評估模組或參考設計。