首頁 電源管理 DC/DC 電源模組 電源模組 (整合式電感器)

TPSM831D31

現行

具有 AVS 和監控功能的 8V-14V 輸入、120A + 40A 雙輸出 PMBus 模組

產品詳細資料

Rating Catalog Topology Buck, Synchronous Buck Iout (max) (A) 120 Vin (max) (V) 14 Vin (min) (V) 8 Vout (max) (V) 1.52 Vout (min) (V) 0.25 Features Adjustable current limit, Current Sharing, Dynamic voltage scaling, EMI Tested, Enable, Light-load efficiency, PMBus, Phase Interleaving, Power good, Remote Sense, Voltage Margining Operating temperature range (°C) -40 to 105 Type Module Duty cycle (max) (%) 25 Control mode D-CAP+ Switching frequency (min) (kHz) 350 Switching frequency (max) (kHz) 700
Rating Catalog Topology Buck, Synchronous Buck Iout (max) (A) 120 Vin (max) (V) 14 Vin (min) (V) 8 Vout (max) (V) 1.52 Vout (min) (V) 0.25 Features Adjustable current limit, Current Sharing, Dynamic voltage scaling, EMI Tested, Enable, Light-load efficiency, PMBus, Phase Interleaving, Power good, Remote Sense, Voltage Margining Operating temperature range (°C) -40 to 105 Type Module Duty cycle (max) (%) 25 Control mode D-CAP+ Switching frequency (min) (kHz) 350 Switching frequency (max) (kHz) 700
QFM (MOA) 28 720 mm² (48 mm × 15 mm)
  • Input voltage range: 8 V to 14 V
  • Dual output: 120 A (3-phase) + 40 A (1-phase)
  • Output voltage range: 0.25 V to 1.52 V
    • Programmable in 5-mV steps
    • Differential remote sense
    • ±0.5% Vref accuracy with remote sense
  • PMBus Interface
    • Programmable VOUT, UVLO, fault limits
    • VIN, VOUT, IOUT, temperature telemetry
    • Supports up to 1-MHz bus speed
    • On-chip non-volatile configuration memory
  • Ultra-fast transient response
  • Switching frequency range: 350 kHz to 700 kHz
  • 15-mm × 48-mm footprint and 12-mm height
  • Efficiencies up to 95%
  • Dual power good outputs
  • Overcurrent, overvoltage, overtemperature protection
  • Operating IC junction range: –40°C to 125°C
  • Operating ambient range: –40°C to 105°C
  • Input voltage range: 8 V to 14 V
  • Dual output: 120 A (3-phase) + 40 A (1-phase)
  • Output voltage range: 0.25 V to 1.52 V
    • Programmable in 5-mV steps
    • Differential remote sense
    • ±0.5% Vref accuracy with remote sense
  • PMBus Interface
    • Programmable VOUT, UVLO, fault limits
    • VIN, VOUT, IOUT, temperature telemetry
    • Supports up to 1-MHz bus speed
    • On-chip non-volatile configuration memory
  • Ultra-fast transient response
  • Switching frequency range: 350 kHz to 700 kHz
  • 15-mm × 48-mm footprint and 12-mm height
  • Efficiencies up to 95%
  • Dual power good outputs
  • Overcurrent, overvoltage, overtemperature protection
  • Operating IC junction range: –40°C to 125°C
  • Operating ambient range: –40°C to 105°C

The TPSM831D31 is a PMBus™-controlled, dual-output, 4-phase power module that combines a high-performance D-CAP+™ controller with four high-efficiency Smart Power Stages, and low-loss inductors, into a rugged, thermally enhanced surface-mount package. The user supplies the input and output capacitors and a few passive components to complete the system. The first output is a 3-phase power stage that can deliver up to 120 A of continuous output current. The second output is a single phase power stage that can deliver up to 40 A of output current.

The PMBus interface provides for converter configuration of each VOUT, UVLO, soft-start, overcurrent, and thermal shutdown parameters. The interface provides support for telemetry that can report the actual input voltage, output voltage, output current, and device temperature. The device can report input and output power. The device supports standard PMBus warning and fault functions. The device supports PMBus communication speeds up to 1 MHz, with 1.8-V or 3.3-V logic levels, as detailed in Section 4.3 of SMBus Specification V3.0. The module supports a subset of the commands in the PMBus 1.3 specification.

The TPSM831D31 is a PMBus™-controlled, dual-output, 4-phase power module that combines a high-performance D-CAP+™ controller with four high-efficiency Smart Power Stages, and low-loss inductors, into a rugged, thermally enhanced surface-mount package. The user supplies the input and output capacitors and a few passive components to complete the system. The first output is a 3-phase power stage that can deliver up to 120 A of continuous output current. The second output is a single phase power stage that can deliver up to 40 A of output current.

The PMBus interface provides for converter configuration of each VOUT, UVLO, soft-start, overcurrent, and thermal shutdown parameters. The interface provides support for telemetry that can report the actual input voltage, output voltage, output current, and device temperature. The device can report input and output power. The device supports standard PMBus warning and fault functions. The device supports PMBus communication speeds up to 1 MHz, with 1.8-V or 3.3-V logic levels, as detailed in Section 4.3 of SMBus Specification V3.0. The module supports a subset of the commands in the PMBus 1.3 specification.

下載 觀看有字幕稿的影片 影片

您可能會感興趣的類似產品

open-in-new 比較替代產品
功能相似於所比較的產品。
PTH12040W 現行 50-A、8 至 14-V 輸入寬輸出調整電源模組 50-A, 8 to 14-V Input, wide-output adjust power module.
PTH08T250W 現行 採用 TurboTrans 的 50A、4.5V 至 14V 輸入非隔離式寬輸出可調整電源模組 50-A, 4.5-V to 14-V Input, non-isolated, wide-output, adjustable power module and will power loads up to 50 A.

技術文件

找不到結果。請清除您的搜尋條件,然後再試一次。
檢視所有 6
重要文件 類型 標題 格式選項 下載最新的英文版本 日期
* 資料表 TPSM831D31 8-V to 14-V Input, 0.25-V to 1.52-V Dual Output, 120-A + 40-A PMBus™ Power Module datasheet (Rev. A) PDF | HTML 2021/6/14
白皮書 Power solution options for data center applications (Rev. A) 2020/2/27
技術文章 Sequencing and powering FPGAs in radar and other defense applications PDF | HTML 2019/11/18
技術文章 Minimize the impact of the MLCC shortage using D-CAP+™ control mode PDF | HTML 2019/4/5
技術文章 Minimize the impact of the MLCC shortage on your power application PDF | HTML 2019/3/29
技術文章 Searching for the newest innovations in power? Find them at APEC PDF | HTML 2019/2/9

設計與開發

如需其他條款或必要資源,請按一下下方的任何標題以檢視詳細頁面 (如有)。

開發板

TPSM831D31EVM — TPSM831D31、8V 至 14V 輸入、雙輸出、120A + 40A PMBus 電源模組評估模組

TPSM831D31 評估板可針對高達 120A(適用於輸出 A)和 40A(適用於輸出 B)的電流,評估 TPSM831D31 電源模組的運作。輸入電壓範圍為 8V 至 14V。輸出 A 和輸出 B 的輸出電壓範圍為 0.25V 至 1.52V。該評估板可輕鬆評估 TPSM831D31 的運作。
使用指南: PDF
支援產品和硬體
有庫存
限制:
??asset.out-of-stock-ti_zh_TW??
無法提供
應用軟體及架構

FUSION_DIGITAL_POWER_DESIGNER — 數位電源軟體

Fusion Digital Power™ 圖形使用者介面 (GUI) 軟體用於配置和監控選擇的德州儀器數位電源控制器和序列器/健康狀態監控器。該應用程式使用 PMBus 協定,透過 TI USB 轉接器經由序列匯流排與裝置通訊。

支援產品和硬體
封裝 針腳 CAD 符號、佔位空間與 3D 模型
QFM (MOA) 28 Ultra Librarian

訂購與品質

建議產品可能具有與此 TI 產品相關的參數、評估模組或參考設計。

支援與培訓

內含 TI 工程師技術支援的 TI E2E™ 論壇

內容係由 TI 和社群貢獻者依「現狀」提供,且不構成 TI 規範。檢視使用條款

若有關於品質、封裝或訂購 TI 產品的問題,請參閱 TI 支援。​​​​​​​​​​​​​​

影片系列

觀看所有影片

影片