首頁 電源管理 閘極驅動器 隔離式閘極驅動器
首頁
電源管理
閘極驅動器
隔離式閘極驅動器

UCC21750-Q1

現行

適用於 IGBT/SiC 且具 DESAT 和內部鉗位的車用 5.7kVrms、± 10A、單通道絕緣式閘極驅動器

立即訂購
產品規格表

UCC21750-Q1

現行
產品規格表 立即訂購

產品詳細資料

Number of channels 1 Isolation rating Reinforced Withstand isolation voltage (VISO) (Vrms) 5700 Working isolation voltage (VIOWM) (Vrms) 2121 Transient isolation voltage (VIOTM) (VPK) 8000, 8400 Power switch IGBT, SiCFET Peak output current (A) 10 Features Active miller clamp, Fault reporting, Integrated analog to PWM sensor, Power good, Short circuit protection, Soft turn-off Output VCC/VDD (max) (V) 33 Output VCC/VDD (min) (V) 13 Input supply voltage (min) (V) 3 Input supply voltage (max) (V) 5.5 TI functional safety category Functional Safety Quality-Managed Propagation delay time (µs) 0.09 Input threshold CMOS Operating temperature range (°C) -40 to 125 Rating Automotive Bootstrap supply voltage (max) (V) 2121 Rise time (ns) 33 Fall time (ns) 27 Undervoltage lockout (typ) (V) 12
Number of channels 1 Isolation rating Reinforced Withstand isolation voltage (VISO) (Vrms) 5700 Working isolation voltage (VIOWM) (Vrms) 2121 Transient isolation voltage (VIOTM) (VPK) 8000, 8400 Power switch IGBT, SiCFET Peak output current (A) 10 Features Active miller clamp, Fault reporting, Integrated analog to PWM sensor, Power good, Short circuit protection, Soft turn-off Output VCC/VDD (max) (V) 33 Output VCC/VDD (min) (V) 13 Input supply voltage (min) (V) 3 Input supply voltage (max) (V) 5.5 TI functional safety category Functional Safety Quality-Managed Propagation delay time (µs) 0.09 Input threshold CMOS Operating temperature range (°C) -40 to 125 Rating Automotive Bootstrap supply voltage (max) (V) 2121 Rise time (ns) 33 Fall time (ns) 27 Undervoltage lockout (typ) (V) 12
SOIC (DW) 16 106.09 mm² 10.3 x 10.3
  • 5.7-kV RMS single channel isolated gate driver
  • AEC-Q100 qualified for automotive applications
    • Device temperature grade 1: -40°C to +125°C ambient operating temperature range
    • Device HBM ESD classification level 3A
    • Device CDM ESD classification level C3
  • SiC MOSFETs and IGBTs up to 2121V pk
  • 33-V maximum output drive voltage (VDD – VEE)
  • ±10-A drive strength and split output
  • 150-V/ns minimum CMTI
  • 200-ns response time fast DESAT protection
  • 4-A Internal active miller clamp
  • 400-mA soft turn-off when fault happens
  • Isolated analog sensor with PWM output for
    • Temperature sensing with NTC, PTC or thermal diode
    • High voltage DC-link or phase voltage
  • Alarm FLT on overcurrent and reset from RST/EN
  • Fast enable and disable response on RST/EN
  • Reject < 40-ns noise transient and pulse on input pins
  • 12-V VDD UVLO with power good on RDY
  • Inputs/outputs with over/under-shoot transient voltage immunity up to 5 V
  • 130-ns (maximum) propagation delay and 30-ns (maximum) pulse/part skew
  • SOIC-16 DW package with creepage and clearance distance > 8 mm
  • Operating junction temperature –40°C to 150°C
  • Safety-related certifications:
    • Reinforced insulation per DIN EN IEC 60747-17 (VDE 0884-17)
    • UL 1577 component recognition program
  • 5.7-kV RMS single channel isolated gate driver
  • AEC-Q100 qualified for automotive applications
    • Device temperature grade 1: -40°C to +125°C ambient operating temperature range
    • Device HBM ESD classification level 3A
    • Device CDM ESD classification level C3
  • SiC MOSFETs and IGBTs up to 2121V pk
  • 33-V maximum output drive voltage (VDD – VEE)
  • ±10-A drive strength and split output
  • 150-V/ns minimum CMTI
  • 200-ns response time fast DESAT protection
  • 4-A Internal active miller clamp
  • 400-mA soft turn-off when fault happens
  • Isolated analog sensor with PWM output for
    • Temperature sensing with NTC, PTC or thermal diode
    • High voltage DC-link or phase voltage
  • Alarm FLT on overcurrent and reset from RST/EN
  • Fast enable and disable response on RST/EN
  • Reject < 40-ns noise transient and pulse on input pins
  • 12-V VDD UVLO with power good on RDY
  • Inputs/outputs with over/under-shoot transient voltage immunity up to 5 V
  • 130-ns (maximum) propagation delay and 30-ns (maximum) pulse/part skew
  • SOIC-16 DW package with creepage and clearance distance > 8 mm
  • Operating junction temperature –40°C to 150°C
  • Safety-related certifications:
    • Reinforced insulation per DIN EN IEC 60747-17 (VDE 0884-17)
    • UL 1577 component recognition program

The UCC21750-Q1 is a galvanic isolated single channel gate driver designed for SiC MOSFETs and IGBTs up to 2121-V DC operating voltage with advanced protection features, best-in-class dynamic performance and robustness. The UCC21750-Q1 has up to ±10-A peak source and sink current.

The input side is isolated from the output side with SiO 2 capacitive isolation technology, supporting up to 1.5-kV RMS working voltage, 12.8-kV PK surge immunity with longer than 40 years Isolation barrier life, as well as providing low part-to-part skew , and > 150-V/ns common mode noise immunity (CMTI).

The UCC21750-Q1 includes the state-of-art protection features, such as fast overcurrent and short circuit detection, shunt current sensing support, fault reporting, active miller clamp, and input and output side power supply UVLO to optimize SiC and IGBT switching behavior and robustness. The isolated analog to PWM sensor can be used for easier temperature or voltage sensing, further increasing the drivers’ versatility and simplifying the system design effort, size, and cost.

The UCC21750-Q1 is a galvanic isolated single channel gate driver designed for SiC MOSFETs and IGBTs up to 2121-V DC operating voltage with advanced protection features, best-in-class dynamic performance and robustness. The UCC21750-Q1 has up to ±10-A peak source and sink current.

The input side is isolated from the output side with SiO 2 capacitive isolation technology, supporting up to 1.5-kV RMS working voltage, 12.8-kV PK surge immunity with longer than 40 years Isolation barrier life, as well as providing low part-to-part skew , and > 150-V/ns common mode noise immunity (CMTI).

The UCC21750-Q1 includes the state-of-art protection features, such as fast overcurrent and short circuit detection, shunt current sensing support, fault reporting, active miller clamp, and input and output side power supply UVLO to optimize SiC and IGBT switching behavior and robustness. The isolated analog to PWM sensor can be used for easier temperature or voltage sensing, further increasing the drivers’ versatility and simplifying the system design effort, size, and cost.
open-in-new 尋找其它 隔離式閘極驅動器
下載 觀看有字幕稿的影片 影片
Information

要求更多資訊

UCC21750-Q1 安全手冊和安全 FIT 率報告現已發行。請立即索取

您可能會感興趣的類似產品

open-in-new 比較替代產品
具備升級功能，可直接投入使用替代所比較的產品
UCC21755-Q1 現行 具主動保護和隔離感測的車用 ±10-A 隔離單通道閘極驅動器 5-V DESAT version that enables faster short circuit protection for SiC FET, which is critical to prevent SiC FET destruction
引腳對引腳的功能與所比較的產品相同
UCC21759-Q1 現行 適用於 IGBT/SiC 且具 DESAT 和內部鉗位的車用 3.0kVrms、± 10A、單通道絕緣式閘極驅動器 Basic isolation

技術文件

star =TI 所選的此產品重要文件
找不到結果。請清除您的搜尋條件，然後再試一次。
檢視所有 11
類型 標題 日期
* Data sheet UCC21750-Q110-A Source/Sink Reinforced Isolated Single Channel Gate Driverfor SiC/IGBT with Active Protection, Isolated Analog Sensing and High-CMTI datasheet (Rev. D) PDF | HTML 2023年 11月 6日
Certificate VDE Certificate for Reinforced Isolation for DIN EN IEC 60747-17 (Rev. S) 2024年 2月 29日
White paper 以可靠且經濟實惠的隔離技術解決高電壓設計挑戰 (Rev. C) PDF | HTML 2024年 2月 15日
User guide UCC217xx and ISO5x5x Half-Bridge EVM User's Guide for Wolfspeed 1200-V SiC 2023年 9月 1日
Certificate UCC217xx/-Q1 CQC Certificate of Product Certification 2023年 6月 7日
Certificate UCC21750QDWEVM-054 EU RoHS Declaration of Conformity (DoC) 2022年 8月 24日
Application brief The Use and Benefits of Ferrite Beads in Gate Drive Circuits PDF | HTML 2021年 12月 16日
Application note Performance of the Analog PWM Channel in Smart Gate Drivers 2020年 1月 16日
Design guide SiC/IGBT Isolated Gate Driver Reference Design With Thermal Diode and Sensing 2019年 12月 18日
User guide UCC217xx Family Driving and Protecting SiC and IGBT Power Modules and Transistor (Rev. B) 2019年 9月 9日
Application brief Why is high UVLO important for safe IGBT & SiC MOSFET power switch operation 2019年 1月 30日

設計與開發

如需其他條款或必要資源，請按一下下方的任何標題以檢視詳細頁面 (如有)。

開發板

UCC21750QDWEVM-025 — 適用於 SiC 和 IGBT 電晶體和電源模組的驅動和保護評估板

The UCC21750QDWEVM-025 is a compact, single channel isolated gate driver board providing drive, bias voltages, desat feature based protection and diagnostic needed for SiC MOSFET and Si IGBT Power Modules housed in 150 x 62 x 17 mm and 106 x 62 x 30 mm packages. This TI EVM is based on 5.7-kVrms (...)
使用指南: PDF
TI.com 無法提供
模擬型號

UCC21750 PSpice Transient Model

SLUM680.ZIP (90 KB) - PSpice Model
下載
模擬型號

UCC21750 Unencrypted PSPICE Transient Model

SLUM718.ZIP (6 KB) - PSpice Model
下載
計算工具

SLUC695 — UCC217xx XL Calculator Tool

支援產品和硬體

支援產品和硬體

產品
隔離式閘極驅動器
UCC21710-Q1 — 適用於 SiC/IGBT 且具過電流保護功能的車用 5.7kVrms 10A 單通道絕緣式閘極驅動器 UCC21732-Q1 — 適用於 IGBT/SiCFET 且具 2 段式關閉功能的車用 5.7kVrms ±10A 單通道絕緣式閘極驅動器 UCC21736-Q1 — 適用於 IGBT/SiC 且具主動短路保護功能的車用 5.7kVrms、±10A 絕緣式單通道閘極驅動器 UCC21739-Q1 — 適用於 IGBT/SiC 且具絕緣式類比感測功能的車用 3kVrms、±10A 單通道絕緣式閘極驅動器 UCC21750 — 適用於 IGBT/SiCFET 且具 DESAT 和內部米勒鉗位的 5.7kVrms ± 10A、單通道絕緣式閘極驅動器 UCC21750-Q1 — 適用於 IGBT/SiC 且具 DESAT 和內部鉗位的車用 5.7kVrms、± 10A、單通道絕緣式閘極驅動器 UCC21759-Q1 — 適用於 IGBT/SiC 且具 DESAT 和內部鉗位的車用 3.0kVrms、± 10A、單通道絕緣式閘極驅動器
下載
配置圖

UCC21750QDWEVM-054 Schematic Files

SLURB30.ZIP (323 KB)
下載
模擬工具

PSPICE-FOR-TI — PSpice® for TI 設計與模擬工具

PSpice® for TI is a design and simulation environment that helps evaluate functionality of analog circuits. This full-featured, design and simulation suite uses an analog analysis engine from Cadence®. Available at no cost, PSpice for TI includes one of the largest model libraries in the (...)
要求
參考設計

PMP23223 — 配備偏壓電源的智慧型隔離式閘極驅動器參考設計

此參考設計展示 UCC21732 柵極驅動器與 UCC14xxx 系列偏壓電源的組合。此設計可用於驅動各種電源開關，其中包括直接連接至 Wolfspeed 碳化矽 (SiC) 場效應電晶體 (FET) 模組。此參考設計也可做為高側或低側驅動器，或是可以用電容模擬負載進行測試。

UCC14240-Q1、UCC14141-Q1 和 UCC14341-Q1 皆屬於整合式偏壓電源的直接投入使用的替代產品，每個元件都具備不同的目標輸入電壓和輸出功率。

UCC14xxx-Q1 資訊：

  • UCC14240-Q1
    • 隔離：基本
    • 輸入電壓 (V)：24 (21 至 27)
    • 輸出電壓 (V)：25 (18 至 25)
    • 功率輸出 (...)
Test report: PDF
封裝 引腳 下載
SOIC (DW) 16 檢視選項
適用 TI 的評估品項標準條款與條件。

訂購與品質

內含資訊：
  • RoHS
  • REACH
  • 產品標記
  • 鉛塗層/球物料
  • MSL 等級/回焊峰值
  • MTBF/FIT 估算值
  • 材料內容
  • 資格摘要
  • 進行中可靠性監測
內含資訊：
  • 晶圓廠位置
  • 組裝地點

建議產品可能具有與此 TI 產品相關的參數、評估模組或參考設計。

支援與培訓

內含 TI 工程師技術支援的 TI E2E™ 論壇

以英文檢視所有論壇主題

內容係由 TI 和社群貢獻者依「現狀」提供，且不構成 TI 規範。檢視使用條款。

若有關於品質、封裝或訂購 TI 產品的問題，請參閱 TI 支援。​​​​​​​​​​​​​​

影片