UCC57108-Q1
- Qualified for automotive applications
- AEC-Q100 qualified
- Device temperature grade 1
- Device HBM ESD classification level H1C
- Device CDM ESD classification level C6
- Typical 3A sink 3A source output currents
- DESAT protection with programmable delay
- Soft turn-off when fault happens
- Absolute maximum VDD voltage: 30V
- Input and enable pins capable of withstanding up to –5V
- Tight UVLO thresholds for bias flexibility
- Typical 25ns propagation delay
- Self-protect driver with thermal shutsown function
- Wide bias voltage range
- Available in 5mm x 4mm SOIC8 package
- Operating junction temperature range of –40°C to 150°C
The UCC5710x-Q1 is a single channel, high-performance low-side IGBT/SiC gate driver for high power automotive application such as PTC heaters, traction inverter active discharge circuit and other auxiliary subsystems.It offers protection features including Under-voltage-lock-out (UVLO), Desaturation protection (DESAT), FAULT report , and Thermal shutdown protection. UCC5710x-Q1 has a typical peak drive strength of 3A. and it can handle –5V on its inputs, which improves robustness in systems with moderate ground bouncing. The inputs are independent of supply voltage and can be connected to most controller outputs for maximum control flexibility. Depending on the different pin configuration, the wide voltage range of bias supply is provided in UCC5710xB-Q1 accommodates bipolar voltage. Also, the seperate high and low driver outputs (UCC5710xC-Q1) and enable funtion (UCC5710xW-Q1) are provided. An accurate 5V output is available with UCC5710xB-Q1 and UCC5710xC-Q1.
技術文件
類型 | 標題 | 日期 | ||
---|---|---|---|---|
* | Data sheet | UCC5710x-Q1 High-Speed, Low-Side Gate Driver With DESAT Protection For Automotive Applications datasheet (Rev. A) | PDF | HTML | 2024年 3月 7日 |
Application note | Selecting Gate Drivers for HVAC Systems | PDF | HTML | 2024年 4月 4日 |
設計與開發
如需其他條款或必要資源,請按一下下方的任何標題以檢視詳細頁面 (如有)。
UCC57108EVM — UCC57108 evaluation module
The UCC57108EVM is designed to primarily evaluate the UCC57108 functionality. The performance of the driver can be evaluated for capacitive loads or power devices with TO-220 footprints. The UCC57108EVM evaluation boards allow for connection to various test points, such as IN, FLT, DESAT, and VREF, (...)
PSPICE-FOR-TI — PSpice® for TI 設計與模擬工具
封裝 | 引腳 | 下載 |
---|---|---|
SOIC (D) | 8 | 檢視選項 |
訂購與品質
- RoHS
- REACH
- 產品標記
- 鉛塗層/球物料
- MSL 等級/回焊峰值
- MTBF/FIT 估算值
- 材料內容
- 資格摘要
- 進行中可靠性監測
- 晶圓廠位置
- 組裝地點
建議產品可能具有與此 TI 產品相關的參數、評估模組或參考設計。