BQ27411EVM-G1C
BQ27411EVM-G1C 電池側 Impedance Track™ 電池電量計評估模組
BQ27411EVM-G1C
概覽
The BQ27411EVM-G1C Pack-Side Impedance Track™ Fuel (Gas) Gauge evaluation module is a complete evaluation system for the bq27411-G1C. The EVM includes one bq27411-G1C circuit module with external current-sense resistor. The bq27411-G1C should be used with batteries that have a 4.35 V charge voltage. A separate orderable EV2400 PC interface board for gas gauge interface along with a PC USB cable, and Windows™-based PC software is needed when using this EVM. The circuit module includes one bq27411-G1C integrated circuit and all other onboard components necessary to monitor and predict capacity for a pack-side fuel gauge solution. The circuit module connects directly across the battery pack. With the USB-Based PC Interface Board for Battery Fuel (Gas) Gauge Evaluation Module (EV2400) interface board and software, the user can:
- Read the bq27411-G1C data registers.
- Program the chipset for different configurations.
- Log cycling data for further evaluation.
- Evaluate the overall functionality of the bq27411-G1C solution under different charge and discharge conditions. The latest Windows™ – based PC software can be downloaded from the product folder on the Texas Instruments Web site.
Related Terms:
- Battery Gas Gauge
- Battery Fuel Gauge
- Battery Fuel Gauge IC
特點
Populated circuit module for quick setup and evaluation.
Downloadable software that can be used for data logging and analysis.
- Populated circuit module for quick setup and evaluation.
- Downloadable software that can be used for data logging and analysis.
電池電量指示
訂購並開始開發
開發板
BQ27411EVM-G1C — BQ27411EVM-G1C 電池側 Impedance Track™ 電池電量計評估模組
BQ27411EVM-G1C — BQ27411EVM-G1C 電池側 Impedance Track™ 電池電量計評估模組
支援軟體
BQEVSW-MKST-UPDATE — Software Update to enable BQEVSW to use MKST-3P-ALT-EV2300
支援產品和硬體
產品
電池電量指示
硬體開發
開發板
BQEVSW-MKST-UPDATE — Software Update to enable BQEVSW to use MKST-3P-ALT-EV2300
Software installer to enable BQEVSW to use MKST-3P-ALT-EV2300
產品
電池電量指示
硬體開發
開發板
文件
Software manifest
版本資訊
Description:
BQEVSW-MKST-UPDATE software is a software update for BQEVSW (bq Evaluation Software) and BQEASY (bq EV-Easy) to allow it to work with the MKST-3P-ALT-EV2300 MKS Technology alternative for EV2300 communications transceiver. This update installs a program that allows switching the USB transceiver target in software like BQEVSW and BQEASY from/to EV2300 to/from MKST-3P-ALT-EV2300.
The program requires administrator privileges.
Requirements:
- Hardware: MKST-3P-ALT-EV2300
- Operating system: Windows (32 or 64 bit)
- Software: Microsoft Visual Studio 2010 C++ Runtime redistributable
Features:
- Enable use of MKST-3P-ALT-EV2300 in older software like BQEVSW and BQEASY
- Switch back to use of EV2300 in older software like BQEVSW and BQEASY
Getting started:
1. Download the software
2. Run the installer and check the option to create shortcuts
3. Run the program using shortcut named BQEVSW-MKST-UPDATE from Start menu/Desktop
4. Allow administrator privilege when/if prompted
5. On the GUI window that opens, select the target transceiver to support and follow steps to switch
6. Connect matching transceiver and start BQEVSW, BQEASY or other similar software.
Note: BQMTESTER-MKST-UPDATE and BQEVSW-MKST-UPDATE both update the same software components. Switching the USB transceiver using any of these shortcuts will also switch it in the other.
支援軟體
BQMTESTER-MKST-UPDATE — Software Update to enable BQMTESTER to use MKST-3P-ALT-EV2300
支援產品和硬體
產品
電池電量指示
硬體開發
開發板
BQMTESTER-MKST-UPDATE — Software Update to enable BQMTESTER to use MKST-3P-ALT-EV2300
Software installer to enable BQMTESTER to use MKST-3P-ALT-EV2300
產品
電池電量指示
硬體開發
開發板
文件
Software manifest
版本資訊
Description:
BQMTESTER-MKST-UPDATE software is a software update for BQMTESTER(BQMTESTER Multi Channel Test and Program software) and ADVANCED-BQMTESTER(Advanced bqMTester Multi-Station Test and Program Software) to allow it to work with the MKST-3P-ALT-EV2300 MKS Technology alternative for EV2300 communications transceiver. This update installs a program that allows switching the USB transceiver target in BQMTESTER and ADVANCED-BQMTESTER software from/to EV2300 to/from MKST-3P-ALT-EV2300. There are also some changes required on the hardware side as described in the PDF guide in the install folder.
The program requires administrator privileges.
Requirements:
- Hardware: MKST-3P-ALT-EV2300, 3.3V LDO with connectors, BQMTESTER or ADVANCED-BQMTESTER board
- Supported operating systems: Windows (32 or64 bits)
- Software: Microsoft Visual Studio 2010 C++ Runtime redistributable
Getting started:
1. Download the software
2. Run the installer and check the option to create shortcuts
3. Run the program using shortcut named BQMTESTER-MKST-UPDATE from Start menu/Desktop
4. Allow administrator privilege when/if prompted
5. On the GUI window that opens, select the target transceiver to support and follow steps to switch
6. Connect matching transceiver and start BQMTESTER or ADVANCED-BQMTESTER software
Note: BQMTESTER-MKST-UPDATE and BQEVSW-MKST-UPDATE both update the same software components. Switching the USB transceiver using any of these shortcuts will also switch it in the other.
技術文件
找不到結果。請清除您的搜尋條件，然後再試一次。
檢視所有 2
| 類型 | 標題 | 下載最新的英文版本 | 日期 | |||
|---|---|---|---|---|---|---|
| 證書 | BQ27411EVM-G1C EU Declaration of Conformity (DoC) | 2019/1/2 | ||||
| 使用指南 | bq27411EVM System-Side Impedance Track Fuel Gauge (Rev. A) | 2016/7/31 |