BQ27741EVM
BQ27741EVM 電池側 Impedance Track 電量 (氣量) 計整合式保護器評估模組
BQ27741EVM
概覽
The BQ27741EVM along with GaugeStudio software provide the customer with tools for developing a battery fuel gauge module for placement inside a lithium-based battery pack. Customers are able to configure the BQ27741EVM so that it can provide accurate battery fuel gauging information. The integrated protection functionality can also be evaluated with this EVM. BQ27741EVM gives the customer information such as battery voltage, temperature measurement, and Remaining State of Charge through its RAM registers. The BQ27741EVM allows the customer to evaluate the BQ27741 IC according to datasheet.
特點
- Complete evaluation system for the bq27741 gas gauge with Impedance Track™ Technology
- Populated circuit module for quick setup
- Downloadable software for testing and system analysis
- Allows evaluation of all bq27741 integrated protector and gas gauging features
電池電量指示
訂購並開始開發
開發板
BQ27741EVM — BQ27741EVM 電池側 Impedance Track 電量 (氣量) 計整合式保護器評估模組
BQ27741EVM — BQ27741EVM 電池側 Impedance Track 電量 (氣量) 計整合式保護器評估模組
支援軟體
BQEVSW-MKST-UPDATE — Software Update to enable BQEVSW to use MKST-3P-ALT-EV2300
支援產品和硬體
產品
電池電量指示
硬體開發
開發板
BQEVSW-MKST-UPDATE — Software Update to enable BQEVSW to use MKST-3P-ALT-EV2300
Software installer to enable BQEVSW to use MKST-3P-ALT-EV2300
產品
電池電量指示
硬體開發
開發板
文件
Software manifest
版本資訊
Description:
BQEVSW-MKST-UPDATE software is a software update for BQEVSW (bq Evaluation Software) and BQEASY (bq EV-Easy) to allow it to work with the MKST-3P-ALT-EV2300 MKS Technology alternative for EV2300 communications transceiver. This update installs a program that allows switching the USB transceiver target in software like BQEVSW and BQEASY from/to EV2300 to/from MKST-3P-ALT-EV2300.
The program requires administrator privileges.
Requirements:
- Hardware: MKST-3P-ALT-EV2300
- Operating system: Windows (32 or 64 bit)
- Software: Microsoft Visual Studio 2010 C++ Runtime redistributable
Features:
- Enable use of MKST-3P-ALT-EV2300 in older software like BQEVSW and BQEASY
- Switch back to use of EV2300 in older software like BQEVSW and BQEASY
Getting started:
1. Download the software
2. Run the installer and check the option to create shortcuts
3. Run the program using shortcut named BQEVSW-MKST-UPDATE from Start menu/Desktop
4. Allow administrator privilege when/if prompted
5. On the GUI window that opens, select the target transceiver to support and follow steps to switch
6. Connect matching transceiver and start BQEVSW, BQEASY or other similar software.
Note: BQMTESTER-MKST-UPDATE and BQEVSW-MKST-UPDATE both update the same software components. Switching the USB transceiver using any of these shortcuts will also switch it in the other.
支援軟體
BQMTESTER-MKST-UPDATE — Software Update to enable BQMTESTER to use MKST-3P-ALT-EV2300
支援產品和硬體
產品
電池電量指示
硬體開發
開發板
BQMTESTER-MKST-UPDATE — Software Update to enable BQMTESTER to use MKST-3P-ALT-EV2300
Software installer to enable BQMTESTER to use MKST-3P-ALT-EV2300
產品
電池電量指示
硬體開發
開發板
文件
Software manifest
版本資訊
Description:
BQMTESTER-MKST-UPDATE software is a software update for BQMTESTER(BQMTESTER Multi Channel Test and Program software) and ADVANCED-BQMTESTER(Advanced bqMTester Multi-Station Test and Program Software) to allow it to work with the MKST-3P-ALT-EV2300 MKS Technology alternative for EV2300 communications transceiver. This update installs a program that allows switching the USB transceiver target in BQMTESTER and ADVANCED-BQMTESTER software from/to EV2300 to/from MKST-3P-ALT-EV2300. There are also some changes required on the hardware side as described in the PDF guide in the install folder.
The program requires administrator privileges.
Requirements:
- Hardware: MKST-3P-ALT-EV2300, 3.3V LDO with connectors, BQMTESTER or ADVANCED-BQMTESTER board
- Supported operating systems: Windows (32 or64 bits)
- Software: Microsoft Visual Studio 2010 C++ Runtime redistributable
Getting started:
1. Download the software
2. Run the installer and check the option to create shortcuts
3. Run the program using shortcut named BQMTESTER-MKST-UPDATE from Start menu/Desktop
4. Allow administrator privilege when/if prompted
5. On the GUI window that opens, select the target transceiver to support and follow steps to switch
6. Connect matching transceiver and start BQMTESTER or ADVANCED-BQMTESTER software
Note: BQMTESTER-MKST-UPDATE and BQEVSW-MKST-UPDATE both update the same software components. Switching the USB transceiver using any of these shortcuts will also switch it in the other.
支援軟體
SLUC499 — bq27741-G1 Firmware (v1.08 .senc file)
支援產品和硬體
產品
電池電量指示
硬體開發
開發板
SLUC499 — bq27741-G1 Firmware (v1.08 .senc file)
產品
電池電量指示
硬體開發
開發板
版本資訊
The design resource accessed as www.ti.com/lit/zip/sluc499 or www.ti.com/lit/xx/sluc499/sluc499.zip has been migrated to a new user experience at www.ti.com/tool/download/SLUC499. Please update any bookmarks accordingly.
軟體程式設計工具
BQ-BMS-PROGRAMMER-SW — Command line programmers for BQ products
支援產品和硬體
產品
電池電量指示
硬體開發
參考設計
開發板
BQ-BMS-PROGRAMMER-SW — Command line programmers for BQ products
SDK, API, and Programmer installer
產品
電池電量指示
硬體開發
參考設計
開發板
文件
Quick Tips text document for Command line programmers
Software Manifest
版本資訊
Description:
BQ-BATTERY-PROGRAMMER-SW software development kit (SDK) is a collection of robust software command line tools that assist with the process of programming, testing, or assembling packs that use TI Battery management products. The executables in this software work with the MKST-3P-ALT-EV2300 MKS Technology alternative for EV2300 communications transceiver. The executables work with a single station but can be extended to multiple stations by using additional software and GUI from MKS Technology Inc. . Support for multiple stations is not included in this software.
There are multiple executables in the download, usually one per family of products. Older products such as BQ20xxx and BQ30xxx are also supported. Examples using the C++ programming language API and Python® programming language are provided for custom development.
Requirements:
- Hardware: MKST-3P-ALT-EV2300
- Supported operating systems: Windows (32 and 64 bits)
- Software: Microsoft Visual Studio 2010 C++ Runtime redistributable
Features:
- Collection of command line executables for Windows
- Small executable size with few dependencies
- Fast programming
- Supports BQFS/DFFS and SREC file formats
- Provides C API for custom code development
- Callable from other programs for automation
- Portable design simplifies deployment
- Separately downloadable support software to enable legacy software like BQEVSW and ADVANCED-BQMTESTER to work with MKST-3P-ALT-EV2300
Getting started:
1. Download the software
2. Run the installer
3. The executables, C API and Python API files can be found in the install location
4. Run the command line executable without arguments to get usage help. Refer to Readme.txt in the install folder for more information and how to get help using the command line.
新功能
- Added support for BQ78350 and BQ34Z100
技術文件
=
TI 所選的重要文件
找不到結果。請清除您的搜尋條件，然後再試一次。
檢視所有 4
| 類型 | 標題 | 下載最新的英文版本 | 日期 | |||
|---|---|---|---|---|---|---|
| * | EVM User's guide | bq27741EVM Single Cell Impedance Track™ Technology Evaluation Module | 2013/5/10 | |||
| 證書 | BQ27741EVM EU Declaration of Conformity (DoC) | 2019/1/2 | ||||
| 資料表 | bq27741-G1 Single-Cell Li-Ion Battery Fuel Gauge with Integrated Protection datasheet (Rev. C) | PDF | HTML | 2015/8/26 | |||
| 使用指南 | Pack-Side Impedance Track™ Battery Fuel Gauge With Integrated Protector and LDO | 2013/2/1 |