JAJSQO0 june   2023 DAC539E4W

PRODUCTION DATA  

  1.   1
  2. 1 特長
  3. 2 アプリケーション
  4. 3 概要
  5. 4 Revision History
  6. 5 Pin Configuration and Functions
  7. 6 Specifications
    1. 6.1  Absolute Maximum Ratings
    2. 6.2  ESD Ratings
    3. 6.3  Recommended Operating Conditions
    4. 6.4  Thermal Information
    5. 6.5  Electrical Characteristics: Threshold DAC
    6. 6.6  Electrical Characteristics: Comparator
    7. 6.7  Electrical Characteristics: General
    8. 6.8  Timing Requirements: I2C Standard Mode
    9. 6.9  Timing Requirements: I2C Fast Mode
    10. 6.10 Timing Requirements: I2C Fast Mode Plus
    11. 6.11 Timing Requirements: SPI Write Operation
    12. 6.12 Timing Requirements: SPI Read and Daisy Chain Operation (FSDO = 0)
    13. 6.13 Timing Requirements: SPI Read and Daisy Chain Operation (FSDO = 1)
    14. 6.14 Timing Diagrams
    15. 6.15 Typical Characteristics
  8. 7 Detailed Description
    1. 7.1 Overview
    2. 7.2 Functional Block Diagram
    3. 7.3 Feature Description
      1. 7.3.1 Smart Digital-to-Analog Converter (DAC) Architecture
      2. 7.3.2 Threshold DAC
        1. 7.3.2.1 Voltage Reference and DAC Transfer Function
          1. 7.3.2.1.1 Power-Supply as Reference
          2. 7.3.2.1.2 Internal Reference
          3. 7.3.2.1.3 External Reference
      3. 7.3.3 Look-Up Table (LUT)
      4. 7.3.4 Programming Interface
      5. 7.3.5 Nonvolatile Memory (NVM)
        1. 7.3.5.1 NVM Cyclic Redundancy Check (CRC)
          1. 7.3.5.1.1 NVM-CRC-FAIL-USER Bit
          2. 7.3.5.1.2 NVM-CRC-FAIL-INT Bit
      6. 7.3.6 Power-On Reset (POR)
      7. 7.3.7 External Reset
      8. 7.3.8 Register-Map Lock
    4. 7.4 Device Functional Modes
      1. 7.4.1 Comparator Mode
        1. 7.4.1.1 Programmable Hysteresis Comparator
      2. 7.4.2 Power-Down Mode
    5. 7.5 Programming
      1. 7.5.1 SPI Programming Mode
      2. 7.5.2 I2C Programming Mode
        1. 7.5.2.1 F/S Mode Protocol
        2. 7.5.2.2 I2C Update Sequence
          1. 7.5.2.2.1 Address Byte
          2. 7.5.2.2.2 Command Byte
        3. 7.5.2.3 I2C Read Sequence
    6. 7.6 Register Maps
      1. 7.6.1  NOP Register (address = 00h) [reset = 0000h]
      2. 7.6.2  DAC-x-MARGIN-HIGH Register (address = 01h, 07h, 0Dh, 13h) [reset = 0000h]
      3. 7.6.3  DAC-x-MARGIN-LOW Register (address = 02h, 08h, 0Eh, 14h) [reset = 0000h]
      4. 7.6.4  DAC-x-VOUT-CMP-CONFIG Register (address = 03h, 09h, 0Fh, 15h) [reset = 0401h]
      5. 7.6.5  DAC-x-CMP-MODE-CONFIG Register (address = 05h, 0Bh, 11h, 17h) [reset = 0000h]
      6. 7.6.6  COMMON-CONFIG Register (address = 1Fh) [reset = 1249h]
      7. 7.6.7  COMMON-TRIGGER Register (address = 20h) [reset = 0000h]
      8. 7.6.8  COMMON-DAC-TRIG Register (address = 21h) [reset = 0000h]
      9. 7.6.9  GENERAL-STATUS Register (address = 22h) [reset = 00h, DEVICE-ID, VERSION-ID]
      10. 7.6.10 CMP-STATUS Register (address = 23h) [reset = 0000h]
      11. 7.6.11 DEVICE-MODE-CONFIG Register (address = 25h) [reset = 8040h]
      12. 7.6.12 INTERFACE-CONFIG Register (address = 26h) [reset = 0000h]
      13. 7.6.13 STATE-MACHINE-CONFIG0 Register (address = 27h) [reset = 0003h]
      14. 7.6.14 SRAM-CONFIG Register (address = 2Bh) [reset = 0000h]
      15. 7.6.15 SRAM-DATA Register (address = 2Ch) [reset = 0000h]
      16. 7.6.16 DAC-x-DATA Register (SRAM address = 21h, 22h, 23h, 24h) [reset = 8000h]
      17. 7.6.17 LUT-x-DATA Register (SRAM address = 25h through 34h) [reset = (see register description)]
      18. 7.6.18 LOOP-WAIT Register (SRAM address = 35h) [reset = 0000h]
  9. 8 Application and Implementation
    1. 8.1 Application Information
    2. 8.2 Typical Application
      1. 8.2.1 Design Requirements
      2. 8.2.2 Detailed Design Procedure
      3. 8.2.3 Application Curve
    3. 8.3 Power Supply Recommendations
    4. 8.4 Layout
      1. 8.4.1 Layout Guidelines
      2. 8.4.2 Layout Example
  10. 9 Device and Documentation Support
    1. 9.1 ドキュメントの更新通知を受け取る方法
    2. 9.2 サポート・リソース
    3. 9.3 Trademarks
    4. 9.4 静電気放電に関する注意事項
    5. 9.5 用語集
  11. 10Mechanical, Packaging, and Orderable Information

パッケージ・オプション

メカニカル・データ（パッケージ｜ピン）
サーマルパッド・メカニカル・データ
発注情報

6.6 Electrical Characteristics: Comparator

all minimum/maximum specifications at –40°C ≤ TA ≤ +125°C and typical specifications at TA = 25°C, 1.7 V ≤ VDD ≤ 5.5 V, DAC reference tied to VDD, gain = 1 × in voltage output mode, and digital inputs at VDD or AGND (unless otherwise noted)
PARAMETER TEST CONDITIONS MIN TYP MAX UNIT
STATIC PERFORMANCE
Offset error(1) (2) 1.7 V ≤ VDD ≤ 5.5 V; DAC at midscale, comparator input at Hi-Z, and DAC operating with external reference. –6 0 6 mV
Offset error time drift(1) VDD = 5.5 V, external reference, TA = 125°C, AINx in Hi-Z mode, DAC at full scale and VAINX at 0 V or DAC at zero scale and VAINX at 1.84 V, drift specified for 10 years of continuous operation 4 mV
OUTPUT
Input voltage VREF connected to VDD, AINx resistor network connected to ground 0 VDD V
VREF connected to VDD, AINx resistor network disconnected from ground 0 VDD × (1/3 – 1/100)
VOL Logic low output voltage ILOAD = 100 μA, output in open-drain mode 0.1 V
DYNAMIC PERFORMANCE
tresp Output response time DAC at midscale with 10-bit resolution, AINx input at Hi-Z, and transition step at AINx node is (VDAC – 2 LSB) to (VDAC + 2 LSB), transition time measured between 10% and 90% of output, output current of 100 µA, comparator output configured in push-pull mode, load capacitor at comparator output is 25 pF 10 µs
(1) Specified by design and characterization, not production tested.
(2) This specification does not include the total unadjusted error (TUE) of the DAC.